GM1 Power Rack with Adjustable Bench Olympic Barbell and 150kg Bumper Weight Plates Set

GYM MASTER GM1 Power Rack Squat Cage Fully Adjustable Power Rack - 25 Levels with Laser Cut numbering to help quick selection. It includes a Multi Grip Pull Up Bar, 2 x Full Length Solid Steel Safety Bars, and 2 x High Spec Laser Cut J-Cups with HDPE to protect your Barbells. The GM1 Power Rack is made from high quality 2.0mm steel and it has a strong design and a 250kg max load. Gunmetal Powder Coated Finish Optional GM1 Cable Pulley System The optional GM1 Cable Pulley System is a great bolt-on system which is easy to add to the GM1 Power Rack using pre-drilled holes in the frame.  It includes a straight bar and a wide lat pull down bar as shown in the photos. It has standard 1″ Diameter weight poles and 2″ Olympic Weight Plate adapters. It has a 130kg Max Load Exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls.  Many other accessories are also available for the GM1 Power Rack Cage. Suits 6ft International, or 7ft bars. Please Note: The multi grip pull up bar can be mounted upside down to reduce the total height of the Power Rack on it's own to approximately 204cm Approx Dimensions - Power Rack Only Height: 213cm (Max) - 204cm if pull up bar inverted Width: 149cm Depth: 121.5cm Width between spotters: 112.5cm. Approx Dimensions - Power Rack with Cable System fitted Max Height: 217.5cm Max Width: 149cm (Unchanged) Max Depth: 172.5cm Weight Stack Pole Length: 20cm Straight Bar Width: 50cm Pull Down Bar Width: 99cm Please note: Not suitable for commercial use. Power Rack with Cable System Our GM1 Power Rack is a brilliant rack for any home or garage gym. With many optional attachments including a Cable System, this Cage will comfortably accommodate most home workouts. The Power Rack has 25 adjustable levels. The frame is made from 14 gauge reinforced steel, and the height levels are laser cut every 5 holes to make adjustments quick and easy. The Cage includes J-Cups with HDPE upgraded pads to protect your barbell. 2 Full Length Safety Bars in Chrome and a Multi Grip Solid Steel Pull Up Bar With Heavy Duty Textured Metal Grip.

GYM MASTER 2" Black Rubber Bumper Plates for Olympic Barbell Weight Lifting Sold in Pairs Solid rubber construction absorbs impact - Stainless steel centre ring Printed GYM MASTER logo and raised weight label Suitable for use on all 2" / 50mm Olympic diameter bars  45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Please Note: The 150KG Full Set option includes 5 pairs of Bumper Plates. The 100KG Set option includes 4 pairs of Bumper Plates. Not Suitable for Commercial Use. 

GYM MASTER GM2 Fully Adjustable Flat | Incline | Decline FID Weight Bench - Gunmetal with Nonslip Cushions 7 backrest angles and 4 seat angles - Suitable for flat and incline exercises. Max Cushion Gap of 55mm Perfect for dumbbell exercises, bench presses etc - Built in handle and castors for easy movement - Extra thick comfortable black padded cushions Strong steel frame - Easy to assemble - Instruction manual included. Rubber feet provide extra grip and protect your floor. Please Note: You will require 10mm, 13mm and 17mm spanners for assembly. Approximate Dimensions: Overall Length: 128cm. Base width: 60cm. Height: 45cm when flat - 122.5cm in highest position. Backrest Height: 91cm. Backrest Width 24cm-31cm. Seat Width at back: 31cm. Seat Depth: 33cm. Cushion thickness: 6cm. Max Load: 260kg. Not Suitable for Commercial Use.  This fully adjustable weight bench is ideal for a home gym, as it offers a range of motion, which allows the user to chose which is the ideal platform for each of their exercises. Offering a flat, incline and decline option, this bench makes swapping your routine simple and quick.

GYM MASTER Olympic Barbell 2" Weight Bar – 4ft / 5ft / 6ft / 6ft International / 7ft Comes with Strong Spring Clip Collars to Keep Weights Secure Good Quality, Long-Lasting Product Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip. Load Capacity: 300kg. Olympic Barbell Weights: 4ft = 7.4kg. 5ft = 11.3kg. 6ft = 14kg. 6ft International = 14kg. 7ft = 17kg. Specifications: Middle Barbell Diameter: 2.8cm. 2" Sleeve Diameter: 5cm. 4ft = 120cm, 17cm Sleeves 5ft =152cm, 27cm sleeves 6ft =183cm, 32cm sleeves 6ft International =186cm, 25cm sleeves 7ft =219cm, 40cm sleeves Please note: No Olympic Weight Plates Included. Measurements May Differ Slightly. Not Suitable for Commercial Use. Your order will be posted together (2" Olympic barbell and spring clip collars), however couriers may deliver the items separately. 2 inch olympic barbell made from heavy duty chrome steel, with quick release spring clip collars and knurled hand grips. Ideal for home gyms, and suitable for a range of exercises, including Olympic lifting, the rotating sleeve allows weight plates to be changed quickly, and easily, due to its spring clip collars while keeping the plates securely in place, whilst using the barbell. Due to the anti-slip hand grips of the barbell, no matter how hard you push yourself, that you ensure your grip remains. The clips also ensure Also, it fits all standard 2 inch Olympic weight plates (not included) This free weight set up will help you to achieve all your fitness goals!

GYM MASTER GM1 Power Rack with Barbell and Weights Set. Includes GM1 power rack + dual pulley cable system, Adjustable weight bench, 6ft Int'l Olympic Barbell, Pair of clamp collars and 150kg of black Olympic bumper plates (2x5kg, 2x10kg, 2x15kg, 2x20kg and 2x25kg). Fully Adjustable Power Rack: (Full Description) 25 height levels, laser-cut numbering, multi-grip pull-up bar, 2 safety bars, 2 laser-cut J-cups with HDPE lining, and built with 2.0mm steel. Max load: 250kg. Integrated Cable Pulley System: (Full Description) Attaches with pre-drilled holes. Includes a straight bar, wide lat pulldown bar, 1" weight poles, and 2" Olympic plate adapters. Max load: 130kg. Durable & Spacious Design: Fits 6ft International bars. Dimensions with cable system: Pulley Wheel Max Height 217.5cm, Width 149cm, Depth 172.5cm (with bumper plate loaded). Weight Stack Pole Length: 20cm, Straight Bar Width: 50cm, Pull Down Bar Width: 99cm. Versatile Adjustable Bench: (Full Description) Flat-to-incline range (46cm to 125.5cm), 92cm backrest, Wide base (69.5cm), 5.5cm cushions. Max load: 450kg. High-Quality Olympic Bar & Plates: Olympic Bar: (Full Description) 6ft int'l olympic barbell - 186cm long, with 25cm sleeves.  Bumper Plates: (Full Description) Includes IWF standard 45cm bumper plates (2cm-10cm thicknesses, 5kg-25kg). Safe, effective lifting. Please note: Not suitable for commercial use.   Upgrade your home gym with the GYM MASTER Power Rack Set, a complete strength training solution designed for versatility and durability. This set includes a heavy-duty power rack, an adjustable weight bench, a cable pulley system, a 6ft Olympic barbell, secure quick-release barbell collars, and a full set of bumper plates (5kg-25kg). The power rack features multiple height adjustments, safety spotters, and a multi-grip pull-up bar, allowing you to perform squats, bench presses, pull-ups, and more. The cable pulley attachment adds even more functionality, making it easy to target different muscle groups. The adjustable bench supports flat, incline, and decline positions, ensuring you can vary your workouts effectively. The bumper plates provide safe, controlled weightlifting, while the Olympic barbell and collars ensure a secure lifting experience. Built from high-quality steel, this set is perfect for serious lifters looking to train at home. Whether you’re a beginner or an experienced athlete, the GYM MASTER Power Rack Set delivers everything you need for full-body strength training.

GYM MASTER GM1 Power Rack Set with Bumper Weight Plates and 6ft Int'l Barbell. Includes GM1 power rack, 6ft Int'l Olympic barbell and 5 pairs of black Olympic bumper plates ranging from 5kg-25kg.  Adjustable Power Rack: (Full Description) 25 height levels, laser-cut numbering, multi-grip pull-up bar, 2 safety bars, 2 laser-cut J-cups with HDPE lining, and built with 2.0mm steel. Many other accessories are also available for the GM1 Power Rack Cage. Max load: 250kg. Please Note: The multi grip pull up bar can be mounted upside down to reduce the total height of the Power Rack on it's own to approx 204cm Olympic Barbell: (Full Description) Comes with strong spring clip collars for secure weights. Durable bar with knurled anti-slip grip. Load capacity: 300kg. Middle Bar Diameter: 2.8cm, Sleeve Diameter: 5cm, total length 186cm, 25cm sleeves. Bar weight: 14kg.  Plate Specifications: (Full Description) 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm.  Approx Power Rack Dimensions: Height: 213cm (Max) - 204cm if pull up bar inverted. Width: 149cm. Depth: 121.5cm. Width between spotters: 112.5cm. Please Note: Not Suitable for Commercial Use.   The GYM MASTER Power Rack Set is a premium strength training solution designed for serious lifters and fitness enthusiasts looking to take their workouts to the next level. Built with a heavy-duty steel frame, this power rack ensures superior stability and durability, making it ideal for intense strength training sessions. The multiple height adjustments allow for a fully customisable workout experience, accommodating exercises such as squats, bench presses, deadlifts, and overhead presses. The integrated multi-grip pull-up bar provides additional workout options, enabling users to target their upper body with different grip variations. For enhanced safety, the rack is equipped with adjustable safety bars and J-hooks, allowing lifters to perform heavy lifts with confidence. The solid construction ensures it can handle high weight capacities, making it suitable for home gym environments. Included in the set is a 6ft International Olympic barbell, crafted from high-quality chrome steel with a knurled grip for optimal control and comfort. The bar is built to withstand heavy loads, ensuring durability for long-term use. To complete the package, this set features a full range of bumper plates, including pairs of 5kg, 10kg, 15kg, 20kg, and 25kg plates. These high-quality plates are coated in heavy-duty rubber, reducing noise and protecting floors from damage. The precision-milled stainless steel center ring ensures a secure fit on the barbell, allowing for smooth and efficient weight changes. Whether you're a beginner or an experienced athlete, the GYM MASTER Power Rack Set provides everything you need to build strength, improve performance, and train safely. Its compact yet robust design makes it a great addition to any gym setup, offering maximum versatility for a full-body workout experience.

GYM MASTER GM2 Half Power Rack Set With Bench Barbell and Bumper Weight Plates. Includes GM2 Half power rack, FID weight bench, 6ft Int'l Olympic barbell, pair of clamp collars and 5 pairs of black bumper weight plates ranging from 5kg-25kg.  Heavy-Duty Adjustable Power Rack: (Full Description) Features 36 height levels, Westside spacing, and laser-cut numbering for precision.  Built from 60x60 2.0mm high-grade steel with a 350kg max load capacity.  Premium Attachments Included – Comes with a pull-up bar, 2 GM3 safety spotters, and 2 laser-cut J-cups with UHMW lining to protect barbells. Olympic Bolt-On Storage System: Made from 50x50 14-gauge steel, with 4 Olympic storage poles on each side for easy access to weight plates. Barbell specification: (Full Description) Middle Bar Diameter: 2.8cm, Sleeve Diameter: 5cm, Length 186cm, 25cm sleeves. Bench Specifications: (Full Description) Bench: 45cm height (flat), 121.5cm (max), 91cm backrest height. Seat: 31cm width, 33cm depth, 6cm cushion thickness. Plate Specifications: (Full Description) IWF standard 45cm plates, thickness: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm Rack & Storage Dimensions: Height 221cm (MAX), Width 124cm, Depth 149cm. GM3 Spotters: 54.5cm barbell rest, 64cm length, 30cm height. Weight storage add-on: 187cm height, 52cm depth. Tighten all bolts by hand first for proper alignment. Note: Not suitable for commercial use.   Upgrade your home gym with this premium strength training set, featuring a heavy-duty half rack, an adjustable workout bench, a high-quality Olympic barbell, secure barbell collars, and a full set of bumper plates (5kg to 25kg). The half rack offers a sturdy frame for squats, bench presses, and pull-ups, with multiple adjustment points for versatility. The adjustable bench provides incline, flat, and decline positions to target different muscle groups. The Olympic barbell is designed for durability and smooth performance, while the bumper plates allow for safe and effective weightlifting. Perfect for both beginners and experienced lifters, this set is built to last and supports a wide range of workouts. Ideal for home gyms, garages, or commercial setups, it provides everything you need for strength training in one complete package.

GYM MASTER GM2 Full Half Power Rack Set With 6ft Int'l. Barbell and Bumper Weight Plates. Includes GM2 Half power rack with storage system and spotters, 6ft Int'l Olympic barbell and 5 pairs of black bumper weight plates ranging from 5kg-25kg. Heavy-Duty Adjustable Power Rack: (Full Description) Features 36 height levels, Westside spacing, Laser-cut numbering for precision. Olympic Bolt-On Storage System: (Full Description) Made from 50x50 14-gauge steel. With 4 Olympic storage poles on each side for easy access to weight plates. Barbell specification: (Full Description) Middle Bar Diameter: 2.8cm, Sleeve Diameter: 5cm. Length 186cm, 25cm sleeves. Built from 60x60 2.0mm high-grade steel with a 350kg max load capacity. Premium Attachments Included: Comes with a pull-up bar, 2 GM3 safety spotters, 2 laser-cut J-cups with UHMW lining to protect barbells. Plate Specifications: (Full Description) 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm.  Rack Dimensions:  Height 221cm (MAX), Width 124cm, Depth 149cm. GM3 Spotters: 54.5cm barbell rest, 64cm length, 30cm height. Weight storage add-on: 187cm height, 52cm depth. Tighten all bolts by hand first for proper alignment. Please Note: Not Suitable for Commercial Use.   Introducing this premium GYM MASTER half rack set is designed for serious strength training, making it ideal for home. It includes a heavy-duty steel half rack with adjustable J-hooks, safety spotter arms, an integrated pull-up bar, and built-in weight storage pegs for convenience. The set also features a high-quality 6ft International Olympic barbell with a durable chrome finish and a full set of rubber-coated bumper plates (5kg to 25kg pairs) designed for shock absorption and floor protection. Whether for squats, bench presses, deadlifts, or pull-ups, this versatile and sturdy setup ensures maximum safety, organisation, and performance for lifters of all levels.

GYM MASTER Olympic Weight Bar and Choice of Bumper Weight Plates Choose between our full set of Bumper Plates, which includes five pairs totalling 150kg, with a choice of five different Barbells. Or our 50kg set of Bumper Plates and your choice between five different Barbells. Plates: (Full Description) Solid rubber construction absorbs impact - Stainless steel centre ring. Suitable for use on all 2"/50mm Olympic diameter bars. 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm. Barbell: (Full Description) Comes with Strong Spring Clip Collars to Keep Weights Secure. Good Quality, Long-Lasting Product. Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip. Barbell Specifications: Middle Bar Diameter: 2.8cm Sleeve Diameter: 5cm 4ft = 120cm, 17cm sleeves 5ft = 152cm, 27cm sleeves 6ft = 182cm, 32cm sleeves 6ft Int'l = 186cm, 25cm sleeves 7ft = 219cm, 40cm sleeves. Measurements may vary slightly. Please Note: Not Suitable for Commercial Use.   Upgrade your strength training with the GYM MASTER Olympic Barbell & Bumper Plate Sets, designed for serious lifters and beginners. The solid steel Olympic barbell, available in sizes from 4ft to 7ft, features knurled non-slip grips, rotating sleeves for friction-free movement, and quick-release spring collars for easy weight changes. Paired with your choice of high-quality rubber bumper plates. Choose between our full set of bumper plates (2 x 25kg, 2 x 20kg, 2 x 15kg, 2 x 10kg, and 2 x 5kg), or our 50kg set (2 x 20kg and 2 x 5kg). Both of these sets are ideal for Olympic weightlifting and deadlifts. Each bumper plate meets IWF standards with a 45cm diameter and offers excellent shock absorption to protect your bar and floor. Built for home gyms, our sets enable safe, effective progression and peak performance in every lift.

GYM MASTER Black Bumper Plates Set & Coloured Change Plates & Storage Trolley.  Includes 5 pairs of black Olympic bumper plates (x2 5kg, x2 10kg, x2 15kg, x2 20kg and x2 25kg), 5 pairs of Coloured Change Plates (x2 0.5kg, x2 1kg, x2 1.5kg, x2 2kg and x2 2.5kg) & Storage trolley. Total plate weight 165kg Storage Trolley: (Full Description) Easy to load and unload with rear castor wheels and front handle for smooth movement; finished in durable hammertone gunmetal powder coat.  Fractional plates: (Full Description) Perfect for micro loading and helping you progress on challenging lifts. Made from solid rubber. Calibrated to +/- 10g. Fractional Change Plate Specifications: Approx Dimensions: 0.5kg: 13.5cm ⌀ x 1.1cm. 1kg: 16m ⌀ x 1.5cm. 1.5kg: 17cm ⌀ x 1.9cm. 2kg: 19cm ⌀ x 1.85cm. 2.5kg: 23cm ⌀ x 2.5cm. Bumper plates: (Full Description) Features solid rubber construction to absorb impact and reduce noise. Suitable for use on all 2"/50mm Olympic diameter bars  Bumper Plate Specifications: 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Trolley Approx Dimensions:   Total height: 30cm - Total width: 40cm - Total length: 157cm. Max Load: 500kg. Please Note: Not Suitable for Commercial Use.

GYM MASTER 150KG Olympic Black Bumper Plates Set & Storage Trolley Rack Storage Trolley: Easy to load and unload with rear castor wheels and front handle for smooth movement; finished in durable hammertone gunmetal powder coat Bumper Plates: Solid rubber construction absorbs impact Stainless steel centre ring Suitable for use on all 2"/50mm Olympic diameter bars Bumper Plate Specifications: 45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Trolley Approx Dimensions:   Total height: 30cm - Total width: 40cm - Total length: 157cm. Max Load: 500kg. Please Note: Not Suitable for Commercial Use.

GYM MASTER Olympic Chrome Barbell With Black Bumper Plate Set and Weight Storage Rack Stand. Choose between our full 150kg or 100kg set of Olympic bumper plates, as well as  your choice of Olympic barbell to perfectly suit your home gym setup.  Bumper Plates: (Full Description) Solid rubber construction absorbs impact - Stainless steel centre ring. Suitable for use on all 2"/50mm Olympic diameter bars. 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Barbell: (Full Description) Comes with Strong Spring Clip Collars to Keep Weights Secure. Good Quality, Long-Lasting Product. Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip. Barbell Specifications: Middle Bar Diameter: 2.8cm Sleeve Diameter: 5cm 4ft = 120cm, 17cm sleeves 5ft = 152cm, 27cm sleeves 6ft = 182cm, 32cm sleeves 6ft Int'l = 186cm, 25cm sleeves 7ft = 219cm, 40cm sleeves.  Measurements may vary slightly. Storage Trolley: (Full Description) Easy to load and unload with rear castor wheels and front handle for smooth movement. The perfect home storage solution. Approx Dimensions: Total height: 30cm, Total width: 40cm, Total length: 157cm. Max Load: 500kg. Please note: Not Suitable for Commercial Use.

GYM MASTER Wall Mounted Olympic Weight Plate Storage Rack and 150kg Set of 2" Bumper Plates. Storage Rack: (Full Description) This vertical wall mounted rack saves floor space with a vertical, wall-mounted design. Crafted from thick steel with heavy-duty welds and finished in a hammertone gunmetal powder coat. Built to hold heavy loads, each of the 4 storage poles supports up to 100kg (total 400kg capacity). (Subject to wall strength and installation) Ideal for serious home training setups  Bumper Plates: (Full Description) Included in this set are 5 pairs of Olympic 2" black rubber bumper plates with a stainless steel center ring - absorbs impact and protects both your barbell and flooring. Bumper Plate Specifications: 45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Approx Rack Dimensions: Max height without plates: 186.5cm Max width without plates: 13cm Storage Pole Length: 25cm Usable Pole Length: 24cm Max depth: 44cm (To the end of the bottom storage pole) Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 GM2 Masonry Bolt Fixing Kit - Set of 4 Zinc plated finish with 13mm hexagon head and integrated washers. These M10 x 80mm bolts are fast and secure to install The undercutting action provides a positive anchorage with no expansion forces like those created by traditional expansion bolts. This causes less damage to the target surface and can also allow these to be used closer to the edge. Suitable to the GM1 and GM2 range, depending on your flooring. Spanner Size Required:13mm. Bolt Length: 80mm, Thread Size: 10mm, Drill Diameter Required: 8mm. Note: Always seek expert advice from a professional such as a builder when deciding what fixings to use when securing your kit to the ground or wall Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 Resistance Band Pegs for 50mm Power Rack Compatible with the GM1 Power Rack, these pegs are excellent for adding accommodating resistance Quick and Easy to add and remove - simply slide them through the cage and use for many different exercises and progressive resistance T-bar shape prevents bands from slipping during workout. Solid steel construction with hard wearing chrome finish Approximate Measurements: Diameter: 12mm Peg Length: 20cm Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 Olympic Weight Plate Storage Poles for 50mm Power Rack 4 Pole Set - Suitable for Olympic plates and compatible with the GM1 Power Rack. These attach to the 4 bottom corners of the GM1 Power Rack for convenient storage and quick access to your Olympic Plates With Gunmetal Powder Coated Finish. Max Load per pole: 65kg. Compatible with all 50x50mm racks with 26mm holes. Approx. Dimensions: Pin Diameter: 25mm. Peg Length: 29cm. Usable Sleeve Length: 24cm. Sleeve Diameter: 5cm. Note: You must use collars to prevent plates from falling if the rack is knocked. Not Suitable for Commercial Use.  Our GM1 Weight Storage Poles are supplied as a set of 4. Evidently ideal for helping to keep your home gym tidy and provide quick and easy access to your plates for weight changes in between sets. Also, the storage poles are a great way to keep ground level obstructions to a minimum additionally, making it easy to grab your required weight plate while you are working out.

GYM MASTER GM1 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM1 Power Rack. These fit onto the top corners of the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc With Gunmetal Powder Coated Finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. Our GM1 Fractional Weight Storage Poles are supplied as a pair. They help keep your home gym tidy and provide quick and easy access to your fractional plates for incremental weight changes.

GYM MASTER GM1 Single Leg Roller Support Rack Attachment for Split Squats Lunges etc This compact leg roller attachment is quick and easy to attach to our GM1 Power Rack and any 50mm Rack with 25mm holes. Great for Bulgarian / Bodyweight split squats. As well as other Glute/Ham work. Split Squats help isolate your Quads for direct targeting and efficient workouts. This adjustable height roller with it's luxurious padding allows you to achieve your best form. Also to get the most from your workouts without any niggling discomfort When force is applied as you squat, the roller moves with you to lessen discomfort and increase your range of motion. This ergonomic design allows you to achieve better form and achieve more reps. Compatible with all 50x50mm Racks with 26mm holes. Approximate Dimensions: Pin Diameter: 25mm. Overall Length: 55.5cm. Pad Diameter: 90cm. Max Load: 150kg. Please Note: Not Suitable for Commercial Use. Quick and easy to set up, this GM1 Rack leg roller attachment can be set at a height of your preference.Which helps to make split squats much more comfortable and moving with you as force is applied which helps improve form. As a result, this is Great for split squats and other glute/ham work. This upgrade will help reduce discomfort and increase reps.

GYM MASTER GM1 Standard J-Cup Hooks with HDPE Protection for 50mm racks Robust and durable barbell rests/hooks HDPE inserts protect barbells from damage and reduces noise Compatible with all 50 x 50mm Racks with 26mm holes. Approximate Dimensions: Pin Diameter: 25mm. Total height: 16cm. Total width: 5cm. Protrudes from rack face: 9cm. Bar rest depth: 5cm. Bar rest width: 5cm. Max Load: 250kg. Gunmetal Powder Coated Finish Please Note: These J-cup Hooks Are Not Suitable for Commercial Use. The ideal barbell rest hook, for when you are starting, or resting between your sets, the J-cup design makes re-racking your bar easier, but maintains safety by not allowing the bar to move. This pair of GM1 Standard 50mm J-Cups with a 25mm pin are compatible with our GM1 Power Rack. These hooks feature a HDPE insert to protect your barbells as well as help providing a quieter workout. Ideal for home gyms that have our racks, and easily adjusted, to ensure you can use them for any exercise movement.

GYM MASTER Dip Bar Attachments. Suitable for power cages or squat racks. Simple Space Saving Upgrade - Quick and Easy to Fit. Solid construction with high quality welds. Rubber handles for secure grip. Suitable for 50mm x 50mm tubes with 25mm holes. With Gunmetal Powder Coated Finish Maximum capacity: 120kg. Please Note: This item does not fit 60 x 60mm cages. Not Suitable for Commercial Use.

GYM MASTER Pair of Chrome Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress Made from Hard Wearing Chrome Plated Steel. Sold in Pairs. Calibrated to +/ - 10G. Laser Engraved GYM MASTER logo and weight label Suitable for use on all 2" / 50mm Olympic diameter bars Dimensions: 0.25kg: 10.5cm ⌀ x 0.5cm. 0.5kg: 10.5cm ⌀ x 1cm. 0.75kg: 10.5cm ⌀ x 1.5cm. 1kg: 10.5cm ⌀ x 2cm Please Note: Not Suitable for Commercial Use. Are you looking to take your weightlifting to the next level? Look no further than these Fractional Change Plates. Designed for micro loading exercises and lifts, these plates are perfect for anyone struggling to progress in their lifts. With their ability to increase your one-rep maximum, these plates are excellent for developing your body muscle, balance, and coordination. One of the standout features of these plates is their chrome plating. Not only does this give them a sleek and polished look, but it also provides them with durability and strength. Unlike standard cast plates, these plates are more robust and built to last. Another great thing about these plates is their versatility. They fit 2" Olympic weight bars, which means they can be used in a variety of exercises and lifts. Whether you're doing squats, deadlifts, or any other Olympic-style lift, these plates will help you take your workout to the next level. With a range of weights available, from 0.25 kg to 1 kg, you can easily find the perfect set to suit your needs. And for those who are always on the go, there's even an option to get a set that includes a travel bag, making it easy to take your plates with you wherever you go. But these plates aren't just for seasoned weightlifters. They're also great for beginners who are just starting out on their fitness journey. By using these plates, you can gradually increase the weight you lift, building up your strength and endurance over time. So if you're looking to take your weightlifting to the next level, consider investing in a set of Fractional Change Plates. With their durability, versatility, and ability to help you progress in your lifts, they're a must-have for any serious weightlifter.

GYM MASTER Pair of Rubber Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress. Made from solid rubber. Sold in Pairs of Fractional plates. Calibrated to +/- 10g. Suitable for use on all 2"/50mm Olympic diameter bars. Approximate Dimensions: 0.5kg: 13.5cm ⌀ x 1.1cm. 1kg: 16cm ⌀ x 1.5cm. 1.5kg: 17cm ⌀ x 1.9cm. 2kg: 19cm ⌀ x 1.85cm. 2.5kg: 23cm ⌀ x 2.5cm Please Note: Not Suitable for Commercial Use. Use these Fractional Change Plates to increase your one-rep maximum - perfect for Micro Loading exercises and lifts where you are struggling to progress. Excellent for developing body muscle, balance and co-ordination. These rubber plates fit 2" Olympic weight bars. The plates range in weight from 0.5 kg to 2.5 kg, or you can buy a full set

GYM MASTER Heavy Duty Power Cage  Fully adjustable with 21 Increments. Also features solid steel pull up bar with heavy duty textured metal grip. Extra strength reinforced steel frame. With gunmetal powder coated finish. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Excellent piece of equipment for bench press exercises and squats, ensuring full safety when working out Secure protective rubber feet included. Maximum weight limits: 260kg max barbell load. 130kg’s max pull up load. Compatible with the GYM MASTER 6ft and 7ft standard and Olympic barbells. Dimensions: Height: 209cm. Width: 110cm. Depth: 112.5cm. Steel frame tube: 50mm x 50mm. Please note: Tools required for assembly are not included. Not suitable for commercial use. Delivery Information This item will be delivered in 3 boxes. The courier may deliver these on different days due to the size of the boxes.

GYM MASTER Heavy Duty Half Power Cage Squat Rack with 20 x 5cm increments at the front and 26 at the rear Excellent piece of equipment for bench press exercises & squats, ensuring full safety when working out.  Also well suited to dips, weighted pull ups etc Includes 2 full length safety bars in chrome, 2 chrome barbell rests, and 2 adjustable dip bar accessories as shown. Large 200kg barbell max load and 120kg max pull up load 50mm heavy duty reinforced steel tube frame. With gunmetal powder coated finish. Suits 6ft international, or 7ft bars. Dimensions (See Drawing): Overall height: 210cm Overall width: 119cm Depth: 136cm Please Note: Tools required for assembly are not included. Not suitable for commercial use.   Delivery Information This item will be delivered in 2 boxes. The courier may deliver these on different days due to the size of the boxes. 

GYM MASTER Adjustable Squat Rack Cage. Fits both standard and Olympic bars. Heavy duty solid steel knurled pull up bar. Gunmetal coated finish. 28 height increments to choose from with a minimum height of 45cm and a maximum height of 197.5cm. Plate storage poles on each corner for added stability, with an adapter for both standard and Olympic plates.  Anchor points on each corner for securing to the floor for maximum stability - ground anchoring bolts are supplied. 50x50mm heavy duty reinforced steel tube frame. With Gunmetal Powder Coated Finish. 28 holes with 17mm diameter. Hole spacing: 5cm. Heavy duty solid steel knurled pull up bar. J-Cup and spotter max load: 200kg. Pull up bar max load: 120kg Dimensions (See Drawing): Overall Height: 220.5cm Overall Width: 121.5cm Overall Depth: 121.5cm Please Note: Suits 6ft International, or 7ft bars. We strongly recommend bolting this rack to the ground. Not suitable for commercial use   Introducing the GYM MASTER fully adjustable Squat Rack Cage and Pull up Station. Ideal for those who love to do squats, bench presses and pull ups, it offers a wide range of exercises with a solid and sturdy construction. Suitable for standard and Olympic barbells. Choose from 28 height settings, complete with additional J hooks, and weight plate storage.

GM2 Half Power Rack Squat Cage with Optional Cable Pulley System, Weight Storage and Spotters. Finished with a hard wearing hammertone gunmetal powder coat Fully adjustable half power rack - 36 Levels with upgraded westside spacing and laser cut numbering to help quick selection. Made from high grade 60mm x 60mm 2.0mm steel. Includes a pair of J-Cups which feature high-quality UHMW liners to absorb impact, reduce noise, and protect against barbell damage. Strong design - 350kg max load. Suits 6ft International, or 7ft bars. Pre-drilled with 11mm diameter holes (Floor fixings are not included and will vary depending on your floor type). The optional cable pulley system includes lat pull down bar and straight bar, perfect for lat pulldowns, seated rows, push downs, bicep curls and various other exercises. Note: You will need to interchange the top bar. Simply bolt the Cable pulley system onto the pre-existing holes.  Incorporate the Olympic bolt on storage system, made from 50x50 14 gauge steel, which boasts eight Olympic weight storage poles (the storage system is not compatible with standard 1" plates). Add x2 GM3 safety spotters to train heavy and solo with complete peace of mind, providing safety in the event of a failed lift. Approx. Dimensions: Half rack: Height 221cm (MAX), Width 124cm, Depth 149cm.  Cable pulley system: Height 222.8cm, Depth 71cm.  GM3 spotters: Barbell rest area: 54.5cm, Overall length 64cm, Height 30cm, Width 6cm.  Weight storage addon: Height: 187cm, Depth: 52cm.  For additional details please refer to images. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Not suitable for commercial use.

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

GYM MASTER 2" Coloured Rubber Bumper Plates for Olympic Barbell Weight Lifting Sold in Pairs Solid rubber construction absorbs impact - Stainless steel centre ring Printed GYM MASTER logo and raised weight label Suitable for use on all 2" / 50mm Olympic diameter bars  45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 9.1cm. Please Note: The 150KG Full Set option includes 5 pairs of Bumper Plates. The 100KG Set option includes 4 pairs of Bumper Plates. Not Suitable for Commercial Use. 

GYM MASTER Pair of 2" Olympic Barbell Quick Release Collars. Universal Fit for All Olympic Size Bars - A Great Upgrade for Basic Collars on Curl Bars, Tricep Bars, Dumbbell Bars, Barbell Bars etc. Simple 'One Click' Lock Design for Easy and Quick Removal and Stronger Than Standard Spring Collars. Made From Solid Nylon Resin and Interior Rubber Grips to Prevent Weights from Slipping During Use. Approximate Dimensions: Internal Diameter: 2" / 50mm Overall Height: 8.6cm Overall Width: 9.1.cm. Please Note: Not Suitable for Commercial Use. Introducing the GYM MASTER Quick Release Olympic Barbell Collars. The most efficient way of securing your weights to your GYM MASTER Olympic barbell without losing time between sets. The hard-wearing “one click” snap lock design with rubber inserts help secure your weights and protect your barbell from scratches and marks.

GYM MASTER Olympic EZ Curl Bar - Optional Clamp Collars. Heavy duty, solid chrome steel. Knurled anti-slip hand grip to constantly provide a secure grip. Suitable for use with 2" Olympic weight plates. Please note: Weight plates not included. Not Suitable for Commercial Use.   Introducing the GYM MASTER Olympic EZ Curl Bar with quick release spring collars or optional clamp collars. Excellent for isolation of the biceps and triceps, the GYM MASTER EZ Curl Bar helps to supinate the wrist to target the muscles whilst reducing the strain on joints. Designed from solid steel with a chrome finish and knurled grip. Suitable for use with 2" weight plates.