GM1 Power Rack Squat Cage with Optional Dual Cable Pulley System

GYM MASTER GM1 GM2 Masonry Bolt Fixing Kit - Set of 4 Zinc plated finish with 13mm hexagon head and integrated washers. These M10 x 80mm bolts are fast and secure to install The undercutting action provides a positive anchorage with no expansion forces like those created by traditional expansion bolts. This causes less damage to the target surface and can also allow these to be used closer to the edge. Suitable to the GM1 and GM2 range, depending on your flooring. Spanner Size Required:13mm. Bolt Length: 80mm, Thread Size: 10mm, Drill Diameter Required: 8mm. Note: Always seek expert advice from a professional such as a builder when deciding what fixings to use when securing your kit to the ground or wall Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 Resistance Band Pegs for 50mm Power Rack Compatible with the GM1 Power Rack, these pegs are excellent for adding accommodating resistance Quick and Easy to add and remove - simply slide them through the cage and use for many different exercises and progressive resistance T-bar shape prevents bands from slipping during workout. Solid steel construction with hard wearing chrome finish Approximate Measurements: Diameter: 12mm Peg Length: 20cm Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 Olympic Weight Plate Storage Poles for 50mm Power Rack 4 Pole Set - Suitable for Olympic plates and compatible with the GM1 Power Rack. These attach to the 4 bottom corners of the GM1 Power Rack for convenient storage and quick access to your Olympic Plates Hard Wearing Gunmetal finish. Max Load per pole: 65kg. Compatible with all 50x50mm racks with 26mm holes. Approx. Dimensions: Pin Diameter: 25mm. Peg Length: 22cm. Usable Sleeve Length: 19cm. Sleeve Diameter: 5cm. Note: You must use collars to prevent plates from falling if the rack is knocked. Please Note: Not Suitable for Commercial Use.  Our GM1 Weight Storage Poles are supplied as a set of 4. Evidently ideal for helping to keep your home gym tidy and provide quick and easy access to your plates for weight changes in between sets. Also, the storage poles are a great way to keep ground level obstructions to a minimum additionally, making it easy to grab your required weight plate while you are working out.

GYM MASTER GM1 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM1 Power Rack. These fit onto the top corners of the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc Hard Wearing Gunmetal finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. Our GM1 Fractional Weight Storage Poles are supplied as a pair. They help keep your home gym tidy and provide quick and easy access to your fractional plates for incremental weight changes.

GYM MASTER GM1 Olympic 2" Bar Landmine Attachment for 50mm Racks Suitable for Olympic Barbells. Compatible with GYM MASTER GM1 Power Rack Pivots and rotates over 180 degrees on horizontal and vertical axis to allow for varied workouts. Fits 2" Olympic bars. Strong Steel Construction with Powder Coated Gunmetal finish. Connection bolt included. Approximate Dimensions: Inner sleeve length: 26cm. Sleeve opening diameter: 5cm/2" for Olympic barbells. Max Load: 150kg. Bracket opening: 51.5mm to suit a 50mm frame. Please Note: Not Suitable for Commercial Use. Suitable for the GM1 Power Rack with 50mm frame, this landmine attachment pivots and rotates on horizontal and vertical axis to allow for varied workouts. Fits 2" Olympic bars. Brilliant for mixing up your training.

GYM MASTER GM1 Single Leg Roller Support Rack Attachment for Split Squats Lunges etc This compact leg roller attachment is quick and easy to attach to our GM1 Power Rack and any 50mm Rack with 25mm holes. Great for Bulgarian / Bodyweight split squats. As well as other Glute/Ham work. Split Squats help isolate your Quads for direct targeting and efficient workouts. This adjustable height roller with it's luxurious padding allows you to achieve your best form. Also to get the most from your workouts without any niggling discomfort When force is applied as you squat, the roller moves with you to lessen discomfort and increase your range of motion. This ergonomic design allows you to achieve better form and achieve more reps. Compatible with all 50x50mm Racks with 26mm holes. Approximate Dimensions: Pin Diameter: 25mm. Overall Length: 55.5cm. Pad Diameter: 90cm. Max Load: 150kg. Please Note: Not Suitable for Commercial Use. Quick and easy to set up, this GM1 Rack leg roller attachment can be set at a height of your preference.Which helps to make split squats much more comfortable and moving with you as force is applied which helps improve form. As a result, this is Great for split squats and other glute/ham work. This upgrade will help reduce discomfort and increase reps.

GYM MASTER GM1 Standard J-Cup Hooks with HDPE Protection for 50mm racks Designed to fit 50mm racks with 25mm holes Robust and durable barbell rests/hooks HDPE inserts protect barbells from damage and reduces noise Compatible with all 50 x 50mm Racks with 26mm holes. Approximate Dimensions: Pin Diameter: 25mm. Total height: 16cm. Total width: 5cm. Protrudes from rack face: 9cm. Bar rest depth: 5cm. Bar rest width: 5cm. Max Load: 250kg. Please Note: These J-cup Hooks Are Not Suitable for Commercial Use. The ideal barbell rest hook, for when you are starting, or resting between your sets, the J-cup design makes re-racking your bar easier, but maintains safety by not allowing the bar to move. This pair of GM1 Standard 50mm J-Cups with a 25mm pin are compatible with our GM1 Power Rack. These hooks feature a HDPE insert to protect your barbells as well as help providing a quieter workout. Ideal for home gyms that have our racks, and easily adjusted, to ensure you can use them for any exercise movement.

GYM MASTER Dip Bar Attachments. Suitable for power cages or squat racks. Simple Space Saving Upgrade - Quick and Easy to Fit. Solid construction with high quality welds. Rubber handles for secure grip. Suitable for 50mm x 50mm tubes with 25mm holes. Heavy-duty gunmetal powder finish. Maximum capacity: 120kg. Please Note: These Will Only Fit 50mm Cages with 2.5cm Holes. Note: Not Suitable for Commercial Use.

GYM MASTER Power Rack Cage. Solid heavy duty steel. Solid steel pull up bar with heavy duty textured grip. 50mm x 50mm steel frame tubes. Fully adjustable with 21 different settings. Gunmetal coated finish. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Compatible with the GYM MASTER 6ft and 7 ft standard and Olympic barbells. Secure protective rubber feet. Compatible with a range of attachments. 260kg max barbell load. 210kg max pull up load. Please Note: Suits 6 Ft International, or 7 foot bars. Assembled dimensions: Height: 209cm - Width: 110cm - Depth: 112.5cm. Please Note: Not Suitable for Commercial Use. Heavy duty steel power rack cage, with textured grip and adjustable settings.

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

GM2 Half Power Squat Rack Cage with Optional Weight Storage and Spotters Finished with a hard wearing hammertone gunmetal powder coat Fully Adjustable Power Rack - 36 Levels with Upgraded Westside Spacing and Laser Cut numbering to help quick selection. Made from High Grade 60x60 2.0mm steel, this Half Power Rack Includes a Pull Up Bar and 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Strong design - 350kg max load. Suits 6 Ft International, or 7 foot bars. Pre-drilled with 11mm diameter holes but floor fixings are not included because they will vary depending on your floor type. Optionally include the Olympic Bolt On Storage System Upgrade and/or 2 x GM3 Safety Spotters The Olympic Bolt On Storage System Upgrade is made from 50x50 14 gauge steel and boasts 4 Olympic Storage Poles on each side. Approximate Overall Dimensions: Cage Dimensions: Height: 221cm (MAX) Width at widest point: 124cm Depth: 149cm. GM3 Spotters: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Weight Storage Add On: Height: 187cm. Depth: 52cm. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Please Note: Not Suitable for Commercial Use. Our GM2 Half Power Rack is a superb rack for any home or garage gym. With many optional attachments such as Weight Storage and Spotters, this Half Cage will comfortably cater for most home workouts. The frame is made from 14 gauge reinforced steel with 36 adjustable levels, and the height levels are laser cut to make adjustments quick and easy. As standard, this cage includes heavy duty J-Cups with UHMW upgraded pads to protect your barbell.

GYM MASTER Half Power Rack Cage. Heavy duty reinforced steel tube frame. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Pull up bar with wide and neutral grip design. Includes 2 adjustable dip bar accessories. Gunmetal coated finish. 50mm x 50mm steel frame tubes. 20 increment settings at the front and 26 at the rear. Large 200kg barbell max load. 200kg pull up max load. Please Note: Suits 6Ft International, or 7 foot bars. Assembled dimensions: Height: 210cm - Width: 119cm - Depth: 136cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER Adjustable Squat Rack Cage. Heavy duty reinforced steel frame. Fits both standard and Olympic bars. Heavy duty solid steel knurled pull up bar. Gunmetal coated finish. 28 height increments to choose from with a minimum height of 45cm and a maximum height of 197.5cm. We Strongly Recommend Bolting This Rack to the Ground. Anchor Points on Each Corner for Securing to the Floor for Maximum Security - Ground Anchoring Bolts Are Supplied. 50x50mm Heavy Duty Reinforced Steel Tube Frame. 28 Holes with 17mm Diameter. Hole spacing: 5cm. Heavy Duty Solid Steel Knurled Pull Up Bar. J-Cup and Spotter Max Load: 200kg. Pull Up Bar Max Load: 120kg Please Note: Suits 6 Ft International, or 7 foot bars. Assembled dimensions: Height: 220.5cm - Width: 119.5cm - Depth: 123cm. Please Note: Not Suitable for Commercial Use. Introducing the GYM MASTER fully adjustable Squat Rack Cage and Pull up Station. Ideal for those who love to do squats, bench presses and pull ups, it offers a wide range of exercises with a solid and sturdy construction. Suitable for standard and Olympic barbells. Choose from 28 height settings, complete with additional J hooks, and weight plate storage.

GYM MASTER Cast Iron 2" Olympic Tri-Grip Weight Plates. Available in pairs of 1.25kg, 2.5kg, 5kg, 10kg, 15kg, 20kg weight increments as well as a Full Set (107.5kg). Tri-grip design for easy pick up and loading. Suitable for strength training, cardio, and conditioning exercises. Different weight options for progressive weight training. Cast iron design. Suitable for use with 2" Olympic bars. Please note: bar not included. Not Suitable for Commercial Use.

GYM MASTER Pair of Black Olympic Rubber Bumper Plates Sold in Pairs. Solid rubber construction absorbs impact. Stainless steel centre ring. Printed GYM MASTER logo and raised weight label. Suitable for use on all 2" / 50mm Olympic diameter bars. 45cm diameter (IWF standard). Approximate plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm Please Note: The Full Set option includes 5 pairs of Bumper Plates, totalling 150kg. Not Suitable for Commercial Use.

GYM MASTER Pair of Coloured Olympic Rubber Bumper Plates Sold in Pairs. Solid rubber construction absorbs impact. Stainless steel centre ring. Printed GYM MASTER logo and raised weight label. Suitable for use on all 2" / 50mm Olympic diameter bars. 45cm diameter (IWF standard). Approximate plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm Please Note: The Full Set option includes 5 pairs of Bumper Plates, totalling 150kg. Not Suitable for Commercial Use.

GYM MASTER Pair of Competition Olympic Rubber Bumper Plates Sold in Pairs Solid rubber construction absorbs impact - with Chrome Plated steel disc insert Printed GYM MASTER logo and weight label. Manufactured within a tolerance of just +/- 10g which meets IWF standards Suitable for use on all 2" / 50mm Olympic diameter bars The Full Set includes 4 Pairs of Bumper Plates, totalling 140kg. 45cm diameter (IWF standard). Approx plate thicknesses: 10kg: 3.5cm. 15kg: 4.5cm. 20kg: 5.5cm. 25kg: 6.5cm. Please Note: Not Suitable for Commercial Use. These Colour Coded Olympic Competition Bumper Plates are all 45cm Diameter (IWF Standard) and are ideal for Quick Selection During Olympic weightlifting and deadlift exercise. They are shock-absorbing and help protect your training bars and floor because they are made of rubber.

GYM MASTER Pair of Chrome Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress Made from Hard Wearing Chrome Plated Steel. Sold in Pairs. Calibrated to +/ - 10G. Laser Engraved GYM MASTER logo and weight label Suitable for use on all 2" / 50mm Olympic diameter bars Dimensions: 0.25kg: 10.5cm ⌀ x 0.5cm. 0.5kg: 10.5cm ⌀ x 1cm. 0.75kg: 10.5cm ⌀ x 1.5cm. 1kg: 10.5cm ⌀ x 2cm Please Note: Not Suitable for Commercial Use. Are you looking to take your weightlifting to the next level? Look no further than these Fractional Change Plates. Designed for micro loading exercises and lifts, these plates are perfect for anyone struggling to progress in their lifts. With their ability to increase your one-rep maximum, these plates are excellent for developing your body muscle, balance, and coordination. One of the standout features of these plates is their chrome plating. Not only does this give them a sleek and polished look, but it also provides them with durability and strength. Unlike standard cast plates, these plates are more robust and built to last. Another great thing about these plates is their versatility. They fit 2" Olympic weight bars, which means they can be used in a variety of exercises and lifts. Whether you're doing squats, deadlifts, or any other Olympic-style lift, these plates will help you take your workout to the next level. With a range of weights available, from 0.25 kg to 1 kg, you can easily find the perfect set to suit your needs. And for those who are always on the go, there's even an option to get a set that includes a travel bag, making it easy to take your plates with you wherever you go. But these plates aren't just for seasoned weightlifters. They're also great for beginners who are just starting out on their fitness journey. By using these plates, you can gradually increase the weight you lift, building up your strength and endurance over time. So if you're looking to take your weightlifting to the next level, consider investing in a set of Fractional Change Plates. With their durability, versatility, and ability to help you progress in your lifts, they're a must-have for any serious weightlifter.

GYM MASTER Pair of Rubber Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress. Made from solid rubber. Sold in Pairs of Fractional plates. Calibrated to +/- 10g. Suitable for use on all 2"/50mm Olympic diameter bars. Approximate Dimensions: 0.5kg: 13.5cm ⌀ x 1.1cm. 1kg: 16cm ⌀ x 1.5cm. 1.5kg: 17cm ⌀ x 1.9cm. 2kg: 19cm ⌀ x 1.85cm. 2.5kg: 23cm ⌀ x 2.5cm Please Note: Not Suitable for Commercial Use. Use these Fractional Change Plates to increase your one-rep maximum - perfect for Micro Loading exercises and lifts where you are struggling to progress. Excellent for developing body muscle, balance and co-ordination. These rubber plates fit 2" Olympic weight bars. The plates range in weight from 0.5 kg to 2.5 kg, or you can buy a full set

Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip on the bar 2" Clip Collars to Keep Weights Secure whilst on the Olympic barbell. Good Olympic Quality, Long-Lasting Product. Load Capacity: 300kg. Olympic Barbell Weights: 4ft = 7.4kg. 5ft = 11.3kg. 6ft = 14kg. 6ft International = 14kg. 7ft = 17kg. Specifications: Middle Barbell Diameter: 2.5cm. 2" Sleeve Diameter: 5cm. 4ft = 120cm, 17cm Sleeves 5ft =152cm, 27cm sleeves 6ft =183cm, 32cm sleeves 6ft International =186cm, 25cm sleeves 7ft =219cm, 40cm sleeves   Please note: No Olympic Weight Plates Included. Measurements May Differ Slightly. Not Suitable for Commercial Use. Your order will be posted together (2" Olympic barbell and spring clip collars), however couriers may deliver the items separately.   2 inch olympic barbell made from heavy duty chrome steel, with quick release spring clip collars and knurled hand grips. Ideal for home gyms, and suitable for a range of exercises, including Olympic lifting, the rotating sleeve allows weight plates to be changed quickly, and easily, due to its spring clip collars while keeping the plates securely in place, whilst using the barbell. Due to the anti-slip hand grips of the barbell, no matter how hard you push yourself, that you ensure your grip remains. The clips also ensure Also, it fits all standard 2 inch Olympic weight plates (not included) This free weight set up will help you to achieve all your fitness goals!

GYM MASTER GM1 50x50mm Power Rack Mounted Barbell Storage Hook Anchor Holder By top mounting this barbell anchor to your power rack you can store your most used barbells in your rack but out of the way. Designed to maximise storage space and minimise hassle, this add-on is sold as a pair. Compatible with many 50x50mm / 2" x 2" Power racks Stores up to 2 barbells *the size and shape of a barbell and may limit the holder to 1. Made from 5mm thick Steel. Chrome plated finish. Protective black 6mm UHMW barbell liner. Max Load: 50kg. Approximate Dimensions: Height: 23.5cm. Width: 22cm. Depth: 3.5cm.  Do not exercise in the Power Rack while bars are in storage. We recommend only using The Barbell Anchor on well secured racks that are bolted to the ground. Please Note: Not Suitable for Commercial Use.