All products

GYM MASTER Cable Crossover Machine. Features Large Upgraded Swivel Pulleys That Extend Cable Life and Help You Do More Exercises - Train Virtually Every Muscle Group 180kg Total Weight – 90kg Per Side. Includes: 2 Straight Bar Handles, 2 Steel Chains, 2 Chrome Stirrup Handles, Tricep Rope Wide Base For Maximum Stability - Eliminates Rocking For a Solid Leg Workout - Also Features A Heavy Duty Pull Up Bar Large Diameter Pulley Wheels Provide Maximum Cable Life and Smooth Operation. Can Be Used For Both High and Low Pulley Exercises. Tools required for assembly: 1x14mm, 2x17mm, 1x19mm spanners Assembled Dimensions: 251cm (W) x 61cm (D) x 212cm (H). Pulldown Bar Load Capacity: 200kg. Please Note: At least the first two weights per tower need to be selected before use. Not Suitable for Commercial Use. 

GYM MASTER GM1 Power Rack Squat Cage Fully Adjustable Power Rack - 25 Levels with Laser Cut numbering to help quick selection. It includes a Multi Grip Pull Up Bar, 2 x Full Length Solid Steel Safety Bars, and 2 x High Spec Laser Cut J-Cups with HDPE to protect your Barbells. The GM1 Power Rack is made from high quality 2.0mm steel and it has a strong design and a 250kg max load. Optional GM1 Cable Pulley System The optional GM1 Cable Pulley System is a great bolt-on system which is easy to add to the GM1 Power Rack using pre-drilled holes in the frame.  It includes a straight bar and a wide lat pull down bar as shown in the photos. It has standard 1″ Diameter weight poles and 2″ Olympic Weight Plate adapters. It has a 130kg Max Load Exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls.  Many other accessories are also available for the GM1 Power Rack Cage. Suits 6ft International, or 7ft bars. Please Note: The multi grip pull up bar can be mounted upside down to reduce the total height of the Power Rack on it's own to approximately 204cm Approx Dimensions - Power Rack Only Height: 213cm (Max) Width: 149cm Depth: 121.5cm Width between spotters: 112.5cm. Approx Dimensions - Power Rack with Cable System fitted Max Height: 215cm Max Width: 149cm (Unchanged) Max Depth: 172.5cm Weight Stack Pole Length: 20cm Straight Bar Width: 50cm Pull Down Bar Width: 99cm Please note: Not suitable for commercial use. Power Rack with Cable System Our GM1 Power Rack is a brilliant rack for any home or garage gym. With many optional attachments including a Cable System, this Cage will comfortably accommodate most home workouts. The Power Rack has 25 adjustable levels. The frame is made from 14 gauge reinforced steel, and the height levels are laser cut every 5 holes to make adjustments quick and easy. The Cage includes J-Cups with HDPE upgraded pads to protect your barbell. 2 Full Length Safety Bars in Chrome and a Multi Grip Solid Steel Pull Up Bar With Heavy Duty Textured Metal Grip.

GYM MASTER GM1 Power Rack with Barbell and Weights Set. Fully Adjustable Power Rack: 25 height levels, laser-cut numbering, multi-grip pull-up bar, 2 safety bars, 2 laser-cut J-cups with HDPE lining, and built with 2.0mm steel. Max load: 250kg. Integrated Cable Pulley System: Attaches with pre-drilled holes. Includes a straight bar, wide lat pulldown bar, 1" weight poles, and 2" Olympic plate adapters. Max load: 130kg. Durable & Spacious Design: Fits 6ft International bars. Dimensions with cable system: Height 215cm (Max), Width 149cm, Depth 172.5cm (with bumper plate loaded). Weight Stack Pole Length: 20cm, Straight Bar Width: 50cm, Pull Down Bar Width: 99cm. Versatile Adjustable Bench: Flat-to-incline range (46cm to 125.5cm), 92cm backrest, Wide base (69.5cm), 5.5cm cushions. Max load: 450kg. High-Quality Olympic Bar & Plates: 6ft int'l olympic barbell - 186cm long, with 25cm sleeves. Includes IWF standard 45cm bumper plates (2cm-10cm thicknesses, 5kg-25kg). Safe, effective lifting. Please note: Not suitable for commercial use.   Upgrade your home gym with the GYM MASTER Power Rack Set, a complete strength training solution designed for versatility and durability. This set includes a heavy-duty power rack, an adjustable weight bench, a cable pulley system, a 6ft Olympic barbell, secure quick-release barbell collars, and a full set of bumper plates (5kg-25kg). The power rack features multiple height adjustments, safety spotters, and a multi-grip pull-up bar, allowing you to perform squats, bench presses, pull-ups, and more. The cable pulley attachment adds even more functionality, making it easy to target different muscle groups. The adjustable bench supports flat, incline, and decline positions, ensuring you can vary your workouts effectively. The bumper plates provide safe, controlled weightlifting, while the Olympic barbell and collars ensure a secure lifting experience. Built from high-quality steel, this set is perfect for serious lifters looking to train at home. Whether you’re a beginner or an experienced athlete, the GYM MASTER Power Rack Set delivers everything you need for full-body strength training.

GM2 Half Power Squat Rack Cage with Optional Weight Storage and Spotters Finished with a hard wearing hammertone gunmetal powder coat Fully Adjustable Power Rack - 36 Levels with Upgraded Westside Spacing and Laser Cut numbering to help quick selection. Made from High Grade 60x60 2.0mm steel, this Half Power Rack Includes a Pull Up Bar and 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Strong design - 350kg max load. Suits 6 Ft International, or 7 foot bars. Pre-drilled with 11mm diameter holes but floor fixings are not included because they will vary depending on your floor type. Optionally include the Olympic Bolt On Storage System Upgrade and/or 2 x GM3 Safety Spotters The Olympic Bolt On Storage System Upgrade is made from 50x50 14 gauge steel and boasts 4 Olympic Storage Poles on each side. Approximate Overall Dimensions: Cage Dimensions: Height: 221cm (MAX) Width at widest point: 124cm Depth: 149cm. GM3 Spotters: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Weight Storage Add On: Height: 187cm. Depth: 52cm. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Please Note: Not Suitable for Commercial Use. Our GM2 Half Power Rack is a superb rack for any home or garage gym. With many optional attachments such as Weight Storage and Spotters, this Half Cage will comfortably cater for most home workouts. The frame is made from 14 gauge reinforced steel with 36 adjustable levels, and the height levels are laser cut to make adjustments quick and easy. As standard, this cage includes heavy duty J-Cups with UHMW upgraded pads to protect your barbell.

GYM MASTER GM2 Half Power Rack Set With Bench Barbell and Bumper Weight Plates. Heavy-Duty Adjustable Power Rack: Features 36 height levels, Westside spacing, and laser-cut numbering for precision.  Built from 60x60 2.0mm high-grade steel with a 350kg max load capacity.  Premium Attachments Included – Comes with a pull-up bar, 2 GM3 safety spotters, and 2 laser-cut J-cups with UHMW lining to protect barbells. Olympic Bolt-On Storage System: Made from 50x50 14-gauge steel, with 4 Olympic storage poles on each side for easy access to weight plates. Barbell specification: Middle Bar Diameter: 2.5cm, Sleeve Diameter: 5cm, Length 186cm, 25cm sleeves. Bench & Plate Specifications: Bench: 45cm height (flat), 121.5cm (max), 91cm backrest height. Seat: 31cm width, 33cm depth, 6cm cushion thickness. IWF standard 45cm plates, thickness: 5kg: 2cm, 25kg: 10cm. Rack & Storage Dimensions: Height 221cm (MAX), Width 124cm, Depth 149cm. GM3 Spotters: 54.5cm barbell rest, 64cm length, 30cm height. Weight storage add-on: 187cm height, 52cm depth. Tighten all bolts by hand first for proper alignment. Note: Not suitable for commercial use.   Upgrade your home gym with this premium strength training set, featuring a heavy-duty half rack, an adjustable workout bench, a high-quality Olympic barbell, secure barbell collars, and a full set of bumper plates (5kg to 25kg). The half rack offers a sturdy frame for squats, bench presses, and pull-ups, with multiple adjustment points for versatility. The adjustable bench provides incline, flat, and decline positions to target different muscle groups. The Olympic barbell is designed for durability and smooth performance, while the bumper plates allow for safe and effective weightlifting. Perfect for both beginners and experienced lifters, this set is built to last and supports a wide range of workouts. Ideal for home gyms, garages, or commercial setups, it provides everything you need for strength training in one complete package.

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

GYM MASTER GM3 Weight Lifting Power Rack Squat Cage and Dual Cable System Attachment with Height and Depth Options. The GM3 Power Rack and the Dual Cable system set is available in 2 heights (206/226cm) and also, 2 depths (60/90cm). It is finished with a hard wearing hammertone gunmetal powder coat The Power Rack is Fully Adjustable with Laser Cut numbering to help quick selection, as a result it suits 6 Ft International, or 7 foot bars. The power rack made from high quality 3.0mm 11 Gauge steel as a result has a 400kg max load. The holes are 16.5mm diameter to suit attachments with a Pin Diameter of 15.5mm. The Pulley System is made from high quality steel and it has a max load of 180kg. It has Olympic 2" diameter weight poles. Included: Pull Up Bar, 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells, Straight Bar handle and a wide Lat Pull Down Bar. Approximate Dimensions (See drawings for specifics): Max Heights: 206cm/226cm Max Depths: 153/178cm Max Width: 133cm. Width between uprights: 110cm. Approx. Foot Plate: 30cm high (UK Mens size 12.5), 35cm wide. Loading space for Olympic weights: 24cm per side. Please Note: Not Suitable for Commercial Use. Please Note: Above all, the GM3 Power Rack must be bolted down. Each foot has 3 x 11mm holes, however floor fixings are not included because the required fixings will vary depending on your floor type. Also, our fixing kit available separately is suitable for Masonry floors only. Accordingly, we strongly recommend consulting a builder to recommend fixings for your specific floor.

GYM MASTER Power Rack Cage. Solid heavy duty steel. Solid steel pull up bar with heavy duty textured grip. 50mm x 50mm steel frame tubes. Fully adjustable with 21 different settings. Gunmetal coated finish. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Compatible with the GYM MASTER 6ft and 7 ft standard and Olympic barbells. Secure protective rubber feet. Compatible with a range of attachments. 260kg max barbell load. 210kg max pull up load. Please Note: Suits 6 Ft International, or 7 foot bars. Assembled dimensions: Height: 209cm - Width: 110cm - Depth: 112.5cm. Please Note: Not Suitable for Commercial Use. Heavy duty steel power rack cage, with textured grip and adjustable settings.

GYM MASTER Half Power Rack Cage. Heavy duty reinforced steel tube frame. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Pull up bar with wide and neutral grip design. Includes 2 adjustable dip bar accessories. Gunmetal coated finish. 50mm x 50mm steel frame tubes. 20 increment settings at the front and 26 at the rear. Large 200kg barbell max load. 200kg pull up max load. Please Note: Suits 6Ft International, or 7 foot bars. Assembled dimensions: Height: 210cm - Width: 119cm - Depth: 136cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER Adjustable Squat Rack Cage. Heavy duty reinforced steel frame. Fits both standard and Olympic bars. Heavy duty solid steel knurled pull up bar. Gunmetal coated finish. 28 height increments to choose from with a minimum height of 45cm and a maximum height of 197.5cm. We Strongly Recommend Bolting This Rack to the Ground. Anchor Points on Each Corner for Securing to the Floor for Maximum Security - Ground Anchoring Bolts Are Supplied. 50x50mm Heavy Duty Reinforced Steel Tube Frame. 28 Holes with 17mm Diameter. Hole spacing: 5cm. Heavy Duty Solid Steel Knurled Pull Up Bar. J-Cup and Spotter Max Load: 200kg. Pull Up Bar Max Load: 120kg Please Note: Suits 6 Ft International, or 7 foot bars. Assembled dimensions: Height: 220.5cm - Width: 119.5cm - Depth: 123cm. Please Note: Not Suitable for Commercial Use. Introducing the GYM MASTER fully adjustable Squat Rack Cage and Pull up Station. Ideal for those who love to do squats, bench presses and pull ups, it offers a wide range of exercises with a solid and sturdy construction. Suitable for standard and Olympic barbells. Choose from 28 height settings, complete with additional J hooks, and weight plate storage.

GYM MASTER GM3 Fully Adjustable Flat | Incline | Decline FID Weight Bench - Gunmetal with Nonslip Cushions This bench sets the mark in terms of quality and value. The quality of this bench needs to be seen to be believed. Choose from 7 FID positions ( -15 (decline), 0 (flat), 20, 35, 50, 65, and 85 degrees) - allowing for a variety of exercises. Max Cushion Gap of 55mm. Made from heavy duty 2 x 3" steel tubing, this weight bench is extremely stable and it is built to last. Please Note: You will require 13mm, 17mm and 19mm spanners for assembly. Approximate Dimensions: Overall Length: 125.5cm. Base width: 69.5cm. Height : 46cm when flat 125.5cm in highest position. Backrest Height: 92cm. Backrest Width in Middle: 30.5cm. Backrest Width at top: 24.5cm. Seat Width at front: 38.5cm. Seat Depth: 36cm. Cushion thickness: 5.5cm. Max Load: 450kg. Please Note: Weight Bench is Not Suitable for Commercial Use.  FID adjustable weight bench allows up to 7 varied positions meaning that you can hit all of your exercises with this one bench. Ideal for weight lifting, the fact that it is adjustable means that you can change positions between sets quickly and easily. Perfect for home gyms.

GYM MASTER GM2 Fully Adjustable Flat | Incline | Decline FID Weight Bench - Gunmetal with Nonslip Cushions 7 backrest angles and 4 seat angles - Suitable for flat and incline exercises. Max Cushion Gap of 55mm Perfect for dumbbell exercises, bench presses etc - Built in handle and castors for easy movement - Extra thick comfortable black padded cushions Strong steel frame - Easy to assemble - Instruction manual included. Rubber feet provide extra grip and protect your floor. Please Note: You will require 10mm, 13mm and 17mm spanners for assembly. Approximate Dimensions: Overall Length: 128cm. Base width: 60cm. Height: 45cm when flat - 121.5cm in highest position. Backrest Height: 91cm. Backrest Width 24cm-31cm. Seat Width at back: 31cm. Seat Depth: 33cm. Cushion thickness: 6cm. Not Suitable for Commercial Use. Max Load: 260kg. This fully adjustable weight bench is ideal for a home gym, as it offers a range of motion, which allows the user to chose which is the ideal platform for each of their exercises. Offering a flat, incline and decline option, this bench makes swapping your routine simple and quick.

GYM MASTER GM2 Fully Adjustable Flat | Incline | Decline FID Weight Bench - Gunmetal with Wide Backrest and Nonslip Cushions 7 backrest angles and 4 seat angles - Suitable for flat and incline exercises. Max Cushion Gap of 55mm. Perfect for dumbbell exercises, bench presses etc - Built in handle and castors for easy movement - Extra thick comfortable black padded cushions Strong steel frame - Easy to assemble - Instruction manual included. Rubber feet provide extra grip and protect your floor. Please Note: You will require 10mm, 13mm and 17mm spanners for assembly. Approximate Dimensions: Length: 128cm. Base Width: 60cm. Height: 45cm (flat) - 121.5cm (highest). Backrest: 91cm (H), 32cm (W). Seat: 30cm (W), 32cm (D). Cushion Thickness: 6cm. Max Load: 260kg. Please Note: Not Suitable for Commercial Use. The wide backrest of this adjustable weight bench is ideal for ensuring that you stay in the correct position and maintain your form when weight lifting. It also gives it a strong base for different exercises.

GYM MASTER Flat Weightlifting Bench. Heavy duty construction. Ideal for dumbbell, barbell and cable exercises. Extra thick padded seat cushion. Hard wearing gunmetal finish. Ideal for home or garage gyms. Comes with a wide rear base and single-column front foot, allowing for more foot room when setting up for a range of exercises Large Max Load: 300kg. Dimensions (See Drawing): Overall Length: 110cm. Width At Widest Point: 63cm. Overall Height: 40cm. Padded Bench Width: 25cm. Padded Bench Length: 110cm. Please Note: Not Suitable for Commercial Use. Flat weightlifting bench for a range of weight exercises, with a sturdy construction. Introducing the GYM MASTER Flat Weightlifting Bench. Easy to move around your home gym yet strong and sturdy. Perfect for extra cable exercises and constructed from steel to allow a max user weight of 300kg.

GYM MASTER Flat Sit Up Bench Handy foot strap - Perfect for sit ups Also great for dumbbell, barbell and cable exercises. Heavy duty construction. Extra thick padded seat cushion to maintain good form and always remain comfortable. Hard wearing gunmetal finish. Rubberised non slip foot caps for a safe and secure workout. Large Max Load: 250kg. Assembled dimensions: Height: 51cm - Width: 52.6cm - Depth: 90.5cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER Adjustable Sissy Squat Bench Leg Machine with Upgraded Padded Cushion This adjustable bench is designed to keep your lower legs vertical while performing free standing squats. It targets your quads by eliminating the use of your glutes & hamstrings With a large anti slip foot plate and adjustable calf & shin pads, this bench is designed to be tailored to your personal requirements for improved form and increased reps. Thick padded cushions provide comfort further allowing you to focus on better form. For higher intensity work outs try folding your arms and holding extra weights. Approximate Dimensions: Main Cushion Height: Min: 50cm - Max 63cm. Length: 110cm. Width at widest point: 49.5cm. Weight capacity: 150kg. Please Note: Not Suitable for Commercial Use. Isolate quad muscles and build strength using our Fully Adjustable Sissy Squat Stand. The stand is designed to keep your legs vertical while you perform free standing squats. The built-in cushion is extra padded so you can squat in comfort.

GYM MASTER Adjustable Single Leg Squat Roller Stand with Foam Foot Rest for Bulgarian Split Squats. Finished with a hard wearing hammertone gunmetal powder coat Ideal for training quadriceps, glutes, and hamstrings; improves balance, flexibility, and coordination Comfortable rotating foam pad. 17 adjustable height levels with quick release adjustment knobs. Perform single leg exercises such as single leg squats and Bulgarian split squats with ease. Can also be utilised for decline push-ups Approx Dimensions: Total Height: 74.5cm Total Width: 61cm Total Depth: 523m Max User Weight: 150kg Please Note: Not Suitable for Commercial Use. This Leg Split Squat Stand is ideal for single-leg workouts like Bulgarian split squats and single leg squats. Develop your balance and single leg form while strengthening your core and stabilising muscles.

GYM MASTER Multi Functional Soft Padded Hip Thrust/Glute Raise Bench Available in two sizes - either 60cm or 100cm long. The larger 100cm model can also be used for basic weight training such as dumbbell fly's and chest press exercises As a result of the multipurpose design it is appropriate for a variety of different exercises, including glute/hip thrust workouts The non skid base helps the bench stay in place and the handle makes these easy to move about. The wedge shape makes them easy to stack away for storage in studios etc, additionally it's made from durable and easy to clean PVC. Dimensions excluding handle: 60cm Version: Length: 60cm. Height: 30cm. Width at bottom: 45cm. Width at top: 25cm. 100cm Version: Length: 100cm. Height: 35cm. Width at bottom: 45cm. Width at top: 25cm. Please Note: Not Suitable for Commercial Use. This is the ideal hip thrust/glute raise bench, but likewise thanks to its design it can be used in a multiple of exercises. Although made of EPE foam, this item will provide a firm surface for hip thrusts, although the anti-slip layer on the base keeps the bench in place while you complete your range of motion.

GYM MASTER Adjustable Plyometric Squat Jump Boxes Available in 12" x 16" x 18", 16" x 20" x 24", 20" x 24" x 30" or the Full Set of 3. An excellent piece of training equipment that utilises bodyweight to improve speed, strength, fitness. Increase your explosive power out of the blocks by focusing on fast twitch muscle fibers throughout the body. The soft surface absorbs impact and reduces stress on your ankles, knees and hips as well as preventing painful shin injuries that can happen with metal or wooden boxes. An excellent set of boxes for plyometrics training with a non slip material cover and packed with high density foam. Dimensions: Box 1: 12" - 30.5cm / 16" - 40.5cm / 18" - 46cm. Weight: 1.7kg. Box 2: 16" - 40.5cm / 20" - 51cm / 24" - 61cm. Weight: 3.3kg. Box 3: 20" - 51cm / 24" - 61cm / 30" - 76cm. Weight: 5.5kg. Please Note: Plyo boxes must always be placed against a wall or other solid surface to prevent movement. Note: Not Suitable for Commercial Use. These Plyometric Squat Jump Boxes are an excellent way to vary training and gain additional focus on explosive power. By using plyo boxes you are able to increase fitness while specifically improving your fast twitch muscles throughout your body.

GYM MASTER Pair of Weight Lifting Deadlift Crash Pads with Mesh Top - Black With a mesh top designed to reduce noise even further and absorb vibrations when dropping barbells With handles for easy transportation, this high density foam design is made with a durable non slip fabric Able to withstand heavy drops including overhead lifts. Carry handles and Extra strong YKK zipper on each pad. Approx Dimensions: Height: 12.5cm. Width: 55cm. Length: 75cm. Approx weight: 7.5kg per pad Please Note: Please remove weights after use. These Pads are Not Suitable for Commercial Use. Ideal solution for stopping loud crashes, or to protect you gym equipment from damage during exercising. Weightlifting Drop Pads absorb heavy impact drops and lower noise levels during workouts. These weight lifting crash pads have a mesh top to further reduce noise during use and are a terrific addition to your home gym setup. They will protect your equipment and save you from disturbing your family and neighbours when you are working out.