Storage

GYM MASTER 5 Bar Olympic Barbell Vertical Floor Stand Storage Rack Ideal floor storage, accommodates up to five Olympic weight bars so you can keep your bars secure and close to hand. Perfect rack for keeping your gym clean, while also allowing you to complete your workouts swiftly and comfortably. Made from heavy duty 5mm 6 gauge steel. Finished with gunmetal hammer tone powder-coat Approx Dimensions: Height: 21.5cm. Width: 31cm. Depth: 31cm. Product weight: 13.5kg. Please Note: Not Suitable for Commercial Use. Ideal home gym storage rack for your olympic barbells Our Olympic Weight Bar Floor Storage Stand can accommodate up to five Olympic weight bars, so you can keep your bars secure and close to hand. Made from heavy duty 5mm 6 gauge steel. Perfect for keeping your home gym floor clean while also allowing you to complete your workouts swiftly and comfortably. Adding storage means that you can keep your gym floor free off clutter.

GYM MASTER Olympic Bumper Plate Storage Stacker Trolley A brilliant storage solution for keeping your gym floor tidy whilst minimising non-workout related lifting! With a small footprint, this multi-directional trolley is simple but effective and a great addition to any busy gym space. Made from powder coated heavy duty steel and with 4 multi-directional heavy duty locking castor wheels for maximum safety and usability. Approximate Dimensions: Total height: 108.5cm. Total width of base: 60cm. Total width inc stoppers: 76cm. Weight sleeve: 93.5cm. Bar diameter: 48mm. Product weight (approx.): 11kg. Please Note: Not Suitable for Commercial Use.

GYM MASTER Wall Mounted Olympic 2 inch Bumper Weight Plate Storage Rack Holder. Finished with a hard wearing hammertone gunmetal powder coat Space saving design - floor space is precious and so are your bumper weights, so you should protect them both by using this wall mounted storage rack. Olympic weight plates are easier to access and you will have more floor space for equipment. Protective rubber stopper on each pole to protect weight plates from scratches whilst storing. This weight plate stand is made of thick steel with heavy duty welds. The entire set can hold 400kg - 100kg per storage pole (Subject to wall strength and installation) Approx Dimensions: Max height without plates: 186.5cm. Max width without plates: 13cm. Storage Pole Length: 25cm. Max depth: 44cm (To the end of the bottom storage pole) Please Note: Not Suitable for Commercial Use. Floor space is precious and so are your weights. So, invest in this wall-mounted olympic bumper weight plate rack to protect both. This wall mounted storage rack give you more space for equipment, alongside easier access. Simple storage solutions can make a big difference - allowing you to get the most out of your time and space    

GYM MASTER Vertical Wall Mounted Olympic 2" Barbell Storage Hanging Rack Finished with a hammertone gunmetal powder coat Choose from 1/2/3/5 barbell storage capacity. Suitable for Olympic diameter weight bars Keeps your bars out of the way while taking up next to no floor space, as well as being very quick to access hanging bars Wall mounted design - Standard wall fixings provided Approximate Dimensions: 1 Barbell: Height: 18cm. Width: 7.5cm. Depth: 10.5cm. Steel Thickness: 6mm / 4 gauge 2 Barbell: Height: 18cm. Width: 21.5cm. Depth: 9cm. Steel Thickness: 5mm / 6 gauge 3 Barbell: Height: 10cm. Width: 29cm. Depth: 10cm. Steel Thickness: 5mm / 6 gauge 5 Barbell: Height: 10cm. Width: 44cm. Depth: 10cm. Steel Thickness: 5mm / 6 gauge Please Note: This Hanging Rack Is Not Suitable for Commercial Use. Our wall mounted hanging racks hold between 1 and 5 bars, taking up very little space on your wall and saving floor space in your home gym. The bars are quick and easy to access as well as out of harms way.

GYM MASTER 3 Bar Vertical Wall Mounted Rack for Barbell Storage with Protective UHMW Pads Three bar storage capacity. Suitable for Olympic diameter weight bars Made from gunmetal hammer tone powder-coated steel. Premium protective liners protect bars from damage. Wall mounted design - Standard wall fixings provided Approx Dimensions: Height: 11.5cm. Width: 30cm. Depth: 12.5cm Please Note: Not Suitable for Commercial Use. Our Vertical Wall Rack can hold three Olympic barbells and is made to fit nicely on your wall, saving you room in your home gym. The bars may then be rapidly removed as needed. With added protective pads to prevent damage to your barbells, this rack is a recommended storage solution.

GYM MASTER Horizontal Wall Mounted Racks for Barbell Storage Finished with a hammertone gunmetal powder coat Choose from 3/6 bar storage capacity. Suitable for all size barbells Keeps your bars out of the way while taking up next to no floor space, as well as being very quick to access Wall mounted design - Standard wall fixings provided Approximate Dimensions: Steel Thickness: 5mm / 6 gauge 3 Bar: Height: 40cm. Width per side: 6cm. Depth: 13.5cm 6 Bar: Height: 80cm. Width per side: 6cm. Depth: 13.5cm Please Note: Not Suitable for Commercial Use. Our Horizontal Wall Racks hold 3 or 6 bars, displaying your barbells for quick access and saving floor space in your home gym.

GYM MASTER Standard 1" Weight Plate Wall Mounted Storage Rack. Finished with a hammertone gunmetal powder coat. Pick from a single piece or pair. Space saving design - floor space is precious and so are your weights, so you should protect them both. Weight plates are easier to access and you will have more floor space for equipment. Additionally, there is a protective rubber stopper on each pole to protect plates from scratches. This weight plate bracket is made of thick steel with heavy duty welds. M10x60 bolts, wall plugs and washers are included. Mounting hole diameter: 11mm. Approx Dimensions: When mounted Horizontally: Height: 10cm. Width: 115cm. Depth of Storage Poles: 32cm. When mounted Vertically: Height: 115cm. Width: 10cm. Depth of Storage Poles: 32cm. Thickness of metal plate: 10mm. Pole diameter: 25mm / 1". Max load = 75kg per storage pole (Subject to wall strength and installation) Please Note: Not Suitable for Commercial Use. Floor space is precious and so are your weights, so invest in this wall-mounted 1" Standard Weight Plate Rack to protect both. With more space for equipment and easier access, this simple storage solution can make a big difference - allowing you to get the most out of your time and space.

GYM MASTER Olympic 2" Weight Plate Wall Mounted Storage Rack. Finished with a hammertone gunmetal powder coat. Pick from a single piece or pair. Space saving design - floor space is precious and so are your weights, as a result you should protect them both. Weight plates are easier to access, so, you will have more floor space for equipment. There is a protective rubber stopper on each pole to protect plates from scratches. This weight plate bracket is made of thick steel with heavy duty welds. M10x60 bolts, wall plugs and washers are included. Mounting hole diameter: 11mm. Approx Dimensions: When mounted Horizontally: Height: 10cm. Width: 115cm. Depth of Storage Poles: 32cm. When mounted Vertically: Height: 115cm. Width: 10cm. Depth of Storage Poles: 32cm. Thickness of metal plate: 10mm. Pole diameter: 50mm / 2". Max load = 75kg per storage pole (Subject to wall strength and installation) Please Note: Not Suitable for Commercial Use. Floor space is precious additionally so are your weights, so invest in this wall-mounted 2" Olympic Weight Plate Rack to protect both. With more space for equipment and easier access, this simple storage solution can make a big difference - allowing you to get the most out of your time and space.

GYM MASTER GM1 50x50mm Power Rack Mounted Barbell Storage Hook Anchor Holder By top mounting this barbell anchor to your power rack you can store your most used barbells in your rack but out of the way. Designed to maximise storage space and minimise hassle, this add-on is sold as a pair. Compatible with many 50x50mm / 2" x 2" Power racks Stores up to 2 barbells *the size and shape of a barbell and may limit the holder to 1. Made from 5mm thick Steel. Chrome plated finish. Protective black 6mm UHMW barbell liner. Max Load: 50kg. Approximate Dimensions: Height: 23.5cm. Width: 22cm. Depth: 3.5cm.  Do not exercise in the Power Rack while bars are in storage. We recommend only using The Barbell Anchor on well secured racks that are bolted to the ground. Please Note: Not Suitable for Commercial Use.

GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM2 Power Rack These fit onto the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc Hard Wearing Gunmetal finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. Looking to level up your weightlifting game? The GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles are here to help. These poles are designed to fit onto the GM2 Power Rack, providing a convenient storage solution for your fractional change plates, QR collars, spring collars, and other workout essentials. Made with durable materials, these Olympic Fractional Weight Change Plate Storage Poles are built to last. With an easy-to-install design, you can quickly attach the poles onto your power rack and start organizing your gym space right away. Say goodbye to cluttered weightlifting areas and hello to a more efficient workout routine. The poles are compatible with Olympic fractional/change plates, making it easy to add small increments to your lifts. With its quick access design, you can easily grab the plates you need and focus on your form, rather than wasting time rummaging through piles of weights. In addition to the fractional plates, the GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles are also great for storing and accessing other essential gym items such as QR collars and spring collars. With everything organized and within reach, you can stay focused on your workout without any interruptions.

GYM MASTER GM2 Rack Vertical Barbell Holder Attachment Designed to fit the GM2 range with 60x60mm racks. Easy storage solution for a single 2" Olympic barbell to keep it safe, and at the same time, secure out of the way This attachment fits onto the uprights, additionally all fixings required are included Approx Dimensions: Sleeve Diameter: 5cm. Storage sleeve height: 19cm. Total Depth: 10.5cm Please Note: Not Suitable for Commercial Use. The GYM MASTER GM2 Rack Vertical Barbell Holder Attachment is the perfect solution for storing your Olympic barbell. Designed to fit the GM2 range with 60x60mm racks, this attachment provides secure and space-saving storage for your barbell. As a result, with this attachment, you can keep your barbell safe and secure out of the way, giving you more space in your gym or workout area. This attachment is easy to install and fits onto the uprights of the GM2 rack. All fixings required for installation are included, so you can have it up and ready to use in no time. The GYM MASTER GM2 Rack Vertical Barbell Holder Attachment is a durable and reliable option. Perfect for storing your Olympic barbell, making it a great addition to your home gym or commercial gym. The holder attachment is made from high-quality materials, ensuring it can withstand the weight and pressure of your Olympic barbell. The holder keeps the barbell upright and stable, preventing it from rolling around and getting damaged. Equally, with this attachment, you can easily access your barbell whenever you need it, without it taking up too much space.

GYM MASTER GM3 Rack Bar Holder Attachment. Choose from either Horizontal or Vertical mount options. Designed to fit the GM3 range with 60x60mm racks. These provide storage for a single 2" Olympic barbell to keep it safe and secure out of the way. Fixings required are included. The Vertical holder fits onto the uprights and the Horizontal holder fits to the cross-members. Approximate Dimensions: Sleeve Diameter: 5cm. Storage sleeve height: 19cm. Total Depth: 10.5cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER Pair of GM3 2" Olympic Weight Plate Holder Storage Pole Power Rack Attachments The perfect alternative for more space-consuming storage, and these can be set at the most comfortable height and location for you. Especially well suited for home and garage gyms with limited space. Exceptionally Strong - this storage pole can support as many weight plates as you can fit on it. Simply fit to your GM3 power rack permanently with the bolts included. Please Note: We strongly advise securing all weight plates with a Spring Clip or QR Collar. Approximate Dimensions: Height: 13cm. Width: 6.1cm. Length: 39.5cm Steel sheet thickness: 4mm. Steel hook diameter: 8mm Please Note: Not Suitable for Commercial Use. These Olympic Weight Plate Storage Horns are suitable for our GM3 Power Rack. They are very popular due to their flexibility and ability to store your plates at any height that suits you for easy access and storage.

GYM MASTER GM3 60x60mm Power Rack Mounted Barbell Storage Hook Anchor Holder By top mounting this barbell anchor to your power rack you can store your most used barbells in your rack but out of the way. Designed to maximise storage space and minimise the hassle of moving barbells in and out of your power rack, this add-on is sold as a pair. Compatible with many 60x60mm Power racks Stores up to 2 barbells *the size and shape of a barbell and may limit the holder to 1. Made from 5mm thick Steel. Chrome plated finish. Protective black 6mm UHMW barbell liner. Max Load: 60kg. Approximate Dimensions: Height: 23.5cm. Width: 22cm. Depth :3.5cm.  Do not store bars with any weights still attached. Take care when storing or retrieving barbells from the barbell anchor. We do not recommend exercising in the Power Rack whilst any bars are in storage. We recommend only using The Barbell Anchor on well secured racks that are bolted to the ground. Please Note: Not Suitable for Commercial Use.

GYM MASTER 3 Tier Hex Dumbbell Rack. 3 tier storage rack. Freestanding, tray-style design. Suitable for all types of dumbbells and home gym accessories. Rubberised, non-slip feet for 100% safety. Protects your floors and gym equipment. Made with heavy duty, durable materials. Gunmetal powder finish. Max load of 400kg. Comes with all necessary hardware to complete assembly. Easy to assemble with included instructions. Assembled dimensions: Height: 88.5cm – Width: 132cm – Depth: 54.5cm. Please Note: Not Suitable for Commercial Use. Ideal 3 Tier Rack to keep your dumbells organised, keeps your home gym tidy, whilst also looking stylish Introducing the GYM MASTER 3 Tier Hex Dumbbell Rack. Perfect for keeping dumbbells and other home gym accessories tidy and organised. With its robust and sturdy design, it can handle up to 400kg.

GYM MASTER GM1 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM1 Power Rack. These fit onto the top corners of the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc Hard Wearing Gunmetal finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. Our GM1 Fractional Weight Storage Poles are supplied as a pair. They help keep your home gym tidy and provide quick and easy access to your fractional plates for incremental weight changes.

GYM MASTER GM3 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM3 Power Rack These fit onto the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc Hard Wearing Gunmetal finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. The GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles designed to fit onto the GM2 Power Rack, providing a convenient storage solution for your fractional change plates, QR collars, spring collars, and other workout essentials. With an easy-to-install design, you can quickly attach the poles onto your power rack and start organizing your gym space right away. Say goodbye to cluttered weightlifting areas, but hello to a more efficient workout routine. The poles are compatible with Olympic fractional/change plates, making it easy to add small increments to your lifts. With its quick access design, you can easily grab the plates you need and focus on your form, rather than wasting time rummaging through piles of weights. In addition to the fractional plates, the GYM MASTER GM3 Pair of Olympic Fractional Weight Change Plate Storage Poles are also great for storing and accessing other essential gym items such as QR collars and spring collars. With everything organized and within reach, you can stay focused on your workout without any interruptions.