150KG Black Bumper Plates Set & Storage Rack

GYM MASTER 2" Black Rubber Bumper Plates for Olympic Barbell Weight Lifting Sold in Pairs Solid rubber construction absorbs impact - Stainless steel centre ring Printed GYM MASTER logo and raised weight label Suitable for use on all 2" / 50mm Olympic diameter bars  45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Please Note: The 150KG Full Set option includes 5 pairs of Bumper Plates. The 100KG Set option includes 4 pairs of Bumper Plates. Not Suitable for Commercial Use. 

GYM MASTER Portable Horizontal Bumper Plate Trolley Rack with Fractional Weight Section. Finished with a hard wearing hammertone gunmetal powder coat Easy to load and unload. Castor wheels at the rear and a handle at the front make it easy to move. A Variety of slot widths to suit a wide range of bumper plates. Perfectly suited to a full set of our bumpers. A Lower section at the front to suit fractional change plates Approx Dimensions: Total Height: 30cm Total Width: 40cm Total Length: 157cm Max Load: 500kg. Please note: Not suitable for commercial use. The perfect functional, yet stylish way to organise your weight plates when not in use at your home gym by using our Portable Bumper Plate Trolley Rack It's portability means its easy to move the plate to the best location for you, whether they are in use or when in storage. Able to accommodate a variety of various sized weight plates, using our Portable Bumper Plate Rack, you can keep weights close at hand. Made with castor wheels and a sturdy grip. Fits full-size bumper plates as well as smaller, fractional change plates

GYM MASTER 2" Coloured Rubber Bumper Plates for Olympic Barbell Weight Lifting Sold in Pairs Solid rubber construction absorbs impact - Stainless steel centre ring Printed GYM MASTER logo and raised weight label Suitable for use on all 2" / 50mm Olympic diameter bars  45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 9.1cm. Please Note: The 150KG Full Set option includes 5 pairs of Bumper Plates. The 100KG Set option includes 4 pairs of Bumper Plates. Not Suitable for Commercial Use. 

GYM MASTER Pair of Rubber Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress. Made from solid rubber. Sold in Pairs of Fractional plates. Calibrated to +/- 10g. Suitable for use on all 2"/50mm Olympic diameter bars. Approximate Dimensions: 0.5kg: 13.5cm ⌀ x 1.1cm. 1kg: 16cm ⌀ x 1.5cm. 1.5kg: 17cm ⌀ x 1.9cm. 2kg: 19cm ⌀ x 1.85cm. 2.5kg: 23cm ⌀ x 2.5cm Please Note: Not Suitable for Commercial Use. Use these Fractional Change Plates to increase your one-rep maximum - perfect for Micro Loading exercises and lifts where you are struggling to progress. Excellent for developing body muscle, balance and co-ordination. These rubber plates fit 2" Olympic weight bars. The plates range in weight from 0.5 kg to 2.5 kg, or you can buy a full set

GYM MASTER Pair of Chrome Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress Made from Hard Wearing Chrome Plated Steel. Sold in Pairs. Calibrated to +/ - 10G. Laser Engraved GYM MASTER logo and weight label Suitable for use on all 2" / 50mm Olympic diameter bars Dimensions: 0.25kg: 10.5cm ⌀ x 0.5cm. 0.5kg: 10.5cm ⌀ x 1cm. 0.75kg: 10.5cm ⌀ x 1.5cm. 1kg: 10.5cm ⌀ x 2cm Please Note: Not Suitable for Commercial Use. Are you looking to take your weightlifting to the next level? Look no further than these Fractional Change Plates. Designed for micro loading exercises and lifts, these plates are perfect for anyone struggling to progress in their lifts. With their ability to increase your one-rep maximum, these plates are excellent for developing your body muscle, balance, and coordination. One of the standout features of these plates is their chrome plating. Not only does this give them a sleek and polished look, but it also provides them with durability and strength. Unlike standard cast plates, these plates are more robust and built to last. Another great thing about these plates is their versatility. They fit 2" Olympic weight bars, which means they can be used in a variety of exercises and lifts. Whether you're doing squats, deadlifts, or any other Olympic-style lift, these plates will help you take your workout to the next level. With a range of weights available, from 0.25 kg to 1 kg, you can easily find the perfect set to suit your needs. And for those who are always on the go, there's even an option to get a set that includes a travel bag, making it easy to take your plates with you wherever you go. But these plates aren't just for seasoned weightlifters. They're also great for beginners who are just starting out on their fitness journey. By using these plates, you can gradually increase the weight you lift, building up your strength and endurance over time. So if you're looking to take your weightlifting to the next level, consider investing in a set of Fractional Change Plates. With their durability, versatility, and ability to help you progress in your lifts, they're a must-have for any serious weightlifter.

GYM MASTER Olympic Barbell 2" Weight Bar – 4ft / 5ft / 6ft / 6ft International / 7ft Comes with Strong Spring Clip Collars to Keep Weights Secure Good Quality, Long-Lasting Product Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip. Load Capacity: 300kg. Olympic Barbell Weights: 4ft = 7.4kg. 5ft = 11.3kg. 6ft = 14kg. 6ft International = 14kg. 7ft = 17kg. Specifications: Middle Barbell Diameter: 2.8cm. 2" Sleeve Diameter: 5cm. 4ft = 120cm, 17cm Sleeves 5ft =152cm, 27cm sleeves 6ft =183cm, 32cm sleeves 6ft International =186cm, 25cm sleeves 7ft =219cm, 40cm sleeves Please note: No Olympic Weight Plates Included. Measurements May Differ Slightly. Not Suitable for Commercial Use. Your order will be posted together (2" Olympic barbell and spring clip collars), however couriers may deliver the items separately. 2 inch olympic barbell made from heavy duty chrome steel, with quick release spring clip collars and knurled hand grips. Ideal for home gyms, and suitable for a range of exercises, including Olympic lifting, the rotating sleeve allows weight plates to be changed quickly, and easily, due to its spring clip collars while keeping the plates securely in place, whilst using the barbell. Due to the anti-slip hand grips of the barbell, no matter how hard you push yourself, that you ensure your grip remains. The clips also ensure Also, it fits all standard 2 inch Olympic weight plates (not included) This free weight set up will help you to achieve all your fitness goals!

GYM MASTER Cast Iron 2" Olympic Tri-Grip Weight Plates. Available in pairs of 1.25kg, 2.5kg, 5kg, 10kg, 15kg, 20kg weight increments as well as a Full Set (107.5kg). Tri-grip design for easy pick up and loading. Suitable for strength training, cardio, and conditioning exercises. Different weight options for progressive weight training. Cast iron design. Suitable for use with 2" Olympic bars. Please note: bar not included. Not Suitable for Commercial Use.

GYM MASTER GM1 Power Rack with Barbell and Weights Set. Includes GM1 power rack + dual pulley cable system, Adjustable weight bench, 6ft Int'l Olympic Barbell, Pair of clamp collars and 150kg of black Olympic bumper plates (2x5kg, 2x10kg, 2x15kg, 2x20kg and 2x25kg). Fully Adjustable Power Rack: (Full Description) 25 height levels, laser-cut numbering, multi-grip pull-up bar, 2 safety bars, 2 laser-cut J-cups with HDPE lining, and built with 2.0mm steel. Max load: 250kg. Integrated Cable Pulley System: (Full Description) Attaches with pre-drilled holes. Includes a straight bar, wide lat pulldown bar, 1" weight poles, and 2" Olympic plate adapters. Max load: 130kg. Durable & Spacious Design: Fits 6ft International bars. Dimensions with cable system: Pulley Wheel Max Height 217.5cm, Width 149cm, Depth 172.5cm (with bumper plate loaded). Weight Stack Pole Length: 20cm, Straight Bar Width: 50cm, Pull Down Bar Width: 99cm. Versatile Adjustable Bench: (Full Description) Flat-to-incline range (46cm to 125.5cm), 92cm backrest, Wide base (69.5cm), 5.5cm cushions. Max load: 450kg. High-Quality Olympic Bar & Plates: Olympic Bar: (Full Description) 6ft int'l olympic barbell - 186cm long, with 25cm sleeves.  Bumper Plates: (Full Description) Includes IWF standard 45cm bumper plates (2cm-10cm thicknesses, 5kg-25kg). Safe, effective lifting. Please note: Not suitable for commercial use.   Upgrade your home gym with the GYM MASTER Power Rack Set, a complete strength training solution designed for versatility and durability. This set includes a heavy-duty power rack, an adjustable weight bench, a cable pulley system, a 6ft Olympic barbell, secure quick-release barbell collars, and a full set of bumper plates (5kg-25kg). The power rack features multiple height adjustments, safety spotters, and a multi-grip pull-up bar, allowing you to perform squats, bench presses, pull-ups, and more. The cable pulley attachment adds even more functionality, making it easy to target different muscle groups. The adjustable bench supports flat, incline, and decline positions, ensuring you can vary your workouts effectively. The bumper plates provide safe, controlled weightlifting, while the Olympic barbell and collars ensure a secure lifting experience. Built from high-quality steel, this set is perfect for serious lifters looking to train at home. Whether you’re a beginner or an experienced athlete, the GYM MASTER Power Rack Set delivers everything you need for full-body strength training.

GYM MASTER GM1 Power Rack Set with Bumper Weight Plates and 6ft Int'l Barbell. Includes GM1 power rack, 6ft Int'l Olympic barbell and 5 pairs of black Olympic bumper plates ranging from 5kg-25kg.  Adjustable Power Rack: (Full Description) 25 height levels, laser-cut numbering, multi-grip pull-up bar, 2 safety bars, 2 laser-cut J-cups with HDPE lining, and built with 2.0mm steel. Many other accessories are also available for the GM1 Power Rack Cage. Max load: 250kg. Please Note: The multi grip pull up bar can be mounted upside down to reduce the total height of the Power Rack on it's own to approx 204cm Olympic Barbell: (Full Description) Comes with strong spring clip collars for secure weights. Durable bar with knurled anti-slip grip. Load capacity: 300kg. Middle Bar Diameter: 2.8cm, Sleeve Diameter: 5cm, total length 186cm, 25cm sleeves. Bar weight: 14kg.  Plate Specifications: (Full Description) 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm.  Approx Power Rack Dimensions: Height: 213cm (Max) - 204cm if pull up bar inverted. Width: 149cm. Depth: 121.5cm. Width between spotters: 112.5cm. Please Note: Not Suitable for Commercial Use.   The GYM MASTER Power Rack Set is a premium strength training solution designed for serious lifters and fitness enthusiasts looking to take their workouts to the next level. Built with a heavy-duty steel frame, this power rack ensures superior stability and durability, making it ideal for intense strength training sessions. The multiple height adjustments allow for a fully customisable workout experience, accommodating exercises such as squats, bench presses, deadlifts, and overhead presses. The integrated multi-grip pull-up bar provides additional workout options, enabling users to target their upper body with different grip variations. For enhanced safety, the rack is equipped with adjustable safety bars and J-hooks, allowing lifters to perform heavy lifts with confidence. The solid construction ensures it can handle high weight capacities, making it suitable for home gym environments. Included in the set is a 6ft International Olympic barbell, crafted from high-quality chrome steel with a knurled grip for optimal control and comfort. The bar is built to withstand heavy loads, ensuring durability for long-term use. To complete the package, this set features a full range of bumper plates, including pairs of 5kg, 10kg, 15kg, 20kg, and 25kg plates. These high-quality plates are coated in heavy-duty rubber, reducing noise and protecting floors from damage. The precision-milled stainless steel center ring ensures a secure fit on the barbell, allowing for smooth and efficient weight changes. Whether you're a beginner or an experienced athlete, the GYM MASTER Power Rack Set provides everything you need to build strength, improve performance, and train safely. Its compact yet robust design makes it a great addition to any gym setup, offering maximum versatility for a full-body workout experience.

GYM MASTER GM2 Half Power Rack Set With Bench Barbell and Bumper Weight Plates. Includes GM2 Half power rack, FID weight bench, 6ft Int'l Olympic barbell, pair of clamp collars and 5 pairs of black bumper weight plates ranging from 5kg-25kg.  Heavy-Duty Adjustable Power Rack: (Full Description) Features 36 height levels, Westside spacing, and laser-cut numbering for precision.  Built from 60x60 2.0mm high-grade steel with a 350kg max load capacity.  Premium Attachments Included – Comes with a pull-up bar, 2 GM3 safety spotters, and 2 laser-cut J-cups with UHMW lining to protect barbells. Olympic Bolt-On Storage System: Made from 50x50 14-gauge steel, with 4 Olympic storage poles on each side for easy access to weight plates. Barbell specification: (Full Description) Middle Bar Diameter: 2.8cm, Sleeve Diameter: 5cm, Length 186cm, 25cm sleeves. Bench Specifications: (Full Description) Bench: 45cm height (flat), 121.5cm (max), 91cm backrest height. Seat: 31cm width, 33cm depth, 6cm cushion thickness. Plate Specifications: (Full Description) IWF standard 45cm plates, thickness: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm Rack & Storage Dimensions: Height 221cm (MAX), Width 124cm, Depth 149cm. GM3 Spotters: 54.5cm barbell rest, 64cm length, 30cm height. Weight storage add-on: 187cm height, 52cm depth. Tighten all bolts by hand first for proper alignment. Note: Not suitable for commercial use.   Upgrade your home gym with this premium strength training set, featuring a heavy-duty half rack, an adjustable workout bench, a high-quality Olympic barbell, secure barbell collars, and a full set of bumper plates (5kg to 25kg). The half rack offers a sturdy frame for squats, bench presses, and pull-ups, with multiple adjustment points for versatility. The adjustable bench provides incline, flat, and decline positions to target different muscle groups. The Olympic barbell is designed for durability and smooth performance, while the bumper plates allow for safe and effective weightlifting. Perfect for both beginners and experienced lifters, this set is built to last and supports a wide range of workouts. Ideal for home gyms, garages, or commercial setups, it provides everything you need for strength training in one complete package.

GYM MASTER GM2 Full Half Power Rack Set With 6ft Int'l. Barbell and Bumper Weight Plates. Includes GM2 Half power rack with storage system and spotters, 6ft Int'l Olympic barbell and 5 pairs of black bumper weight plates ranging from 5kg-25kg. Heavy-Duty Adjustable Power Rack: (Full Description) Features 36 height levels, Westside spacing, Laser-cut numbering for precision. Olympic Bolt-On Storage System: (Full Description) Made from 50x50 14-gauge steel. With 4 Olympic storage poles on each side for easy access to weight plates. Barbell specification: (Full Description) Middle Bar Diameter: 2.8cm, Sleeve Diameter: 5cm. Length 186cm, 25cm sleeves. Built from 60x60 2.0mm high-grade steel with a 350kg max load capacity. Premium Attachments Included: Comes with a pull-up bar, 2 GM3 safety spotters, 2 laser-cut J-cups with UHMW lining to protect barbells. Plate Specifications: (Full Description) 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm.  Rack Dimensions:  Height 221cm (MAX), Width 124cm, Depth 149cm. GM3 Spotters: 54.5cm barbell rest, 64cm length, 30cm height. Weight storage add-on: 187cm height, 52cm depth. Tighten all bolts by hand first for proper alignment. Please Note: Not Suitable for Commercial Use.   Introducing this premium GYM MASTER half rack set is designed for serious strength training, making it ideal for home. It includes a heavy-duty steel half rack with adjustable J-hooks, safety spotter arms, an integrated pull-up bar, and built-in weight storage pegs for convenience. The set also features a high-quality 6ft International Olympic barbell with a durable chrome finish and a full set of rubber-coated bumper plates (5kg to 25kg pairs) designed for shock absorption and floor protection. Whether for squats, bench presses, deadlifts, or pull-ups, this versatile and sturdy setup ensures maximum safety, organisation, and performance for lifters of all levels.

GYM MASTER Squat Rack With Barbell and Weights Set Includes; adjustable squat rack, 6ft International Olympic barbell, and 6 rubber-coated weight plates (4x10kg, 2x5kg) for a complete strength training setup. Adjustable Squat Rack Stand with Spotters and Dip Bars: (Full Description) Adjusting Pins Make it Easy to Change The Width & Height For A Wide Range Of Exercises. Choose From 13 Different Rack Heights With 5cm Intervals and 10 Different Widths at 5cm Intervals. Large 250kg Max Load. Quick and Easy To Assemble. 50mm Heavy Duty Steel Tube Frame. Plate Specifications: (Full Description) 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm. Suitable for use on all 2" / 50mm Olympic diameter bars. Solid rubber construction absorbs impact - Stainless steel centre ring. Olympic Barbell: (Full Description) Comes with strong spring clip collars for secure weights. Durable bar with knurled anti-slip grip. Load capacity: 300kg. Middle Bar Diameter: 2.8cm, Sleeve Diameter: 5cm, total length 186cm, 25cm sleeves. Bar weight: 14kg.  Squat Rack Dimensions: Overall Width: 72cm to 117cm. Overall Depth: 69cm. Overall Height: 108.5cm (Min) 168.5cm (Max). Spotter Height: 85cm. Spotter Depth: 18cm. Please Note: Not Suitable for Commercial Use.   Transform your home workouts with the GYM MASTER Squat Rack Set – the ultimate all-in-one setup for serious strength training. Whether you're building muscle, increasing power, or leveling up your fitness game, this complete kit has everything you need to train with confidence. Built from heavy-duty steel, the adjustable squat rack offers stability and multiple height settings to suit your favorite exercises – from squats and bench presses to shoulder presses and more. It’s compact enough for home use, yet tough enough to handle your heaviest lifts. Built-in plate storage keeps your space neat and ready for action. Get stronger, lift smarter, and make every workout count.

GYM MASTER Adjustable Squat Rack Weight Lifting Set With 6ft Int'l Barbell and Bumper Plates. Includes Adjustable Heavy Duty Squat Rack, 6ft Int'l Olympic barbell, and 6 black rubber-coated weight plates (2x5kg, 2x10kg & 2x15kg).  Fully Adjustable Squat Rack and Dip Bar Station: (Full Description) Adjusting Pins Make it Easy to Change The Width and Height For A Wide Range Of Exercises Flexible design suits most benches. The plate holder provides tidy storage and protection of your plates. Choose from 13 different rack heights at 5cm intervals, 7 spotter heights at 5cm intervals, and 10 widths at 5cm intervals. Olympic Barbell: (Full Description) Comes with strong spring clip collars for secure weights. Durable bar with knurled anti-slip grip. Load capacity: 300kg. Middle Bar Diameter: 2.8cm, Sleeve Diameter: 5cm, total length 186cm, 25cm sleeves Bar weight: 14kg.  Plate Specifications: (Full Description) IWF standard 45cm plates. Thickness: 5kg: 2cm, 10kg: 4cm, 15kg: 6cm. Rack Dimensions: Width 72.5-117.5cm Depth 84.5cm Height 112-172cm Spotter Height 72-112cm Spotter Depth 34cm. Large 250kg max load 50mm heavy-duty steel frame. Please Note: Tools Required For Assembly Are Not Included. Not suitable for commercial use.   The GYM MASTER Squat Rack Set is a versatile and durable solution for strength training at home. Featuring a sturdy, adjustable squat rack with a solid steel frame, this set supports exercises like squats, bench presses, and overhead lifts. The rack offers multiple height adjustments and built-in weight storage for added convenience. Included is a 6ft International Olympic barbell crafted from high-quality chrome steel, ensuring a secure grip and long-lasting performance. The set also comes with bumper plates (pairs of 5kg, 10kg, and 15kg), coated in heavy-duty rubber to minimise impact and noise during lifts. Designed for lifters of all levels, this complete setup provides the stability, safety, and functionality needed for effective strength training.

GYM MASTER GM3 Power Rack With Barbell and Weights Set Available in 2 depths and 3 heights and choice of Olympic Barbell 6ft Int'l or 7ft. Includes: GM3 Power Rack, 6ft Int'l Olympic Barbell and 5 pairs of black Olympic bumper plates (2x5kg, 2x10kg, 2x15kg, 2x20kg and 2x25kg). Power Rack: (Full Description) Fully Adjustable Power Rack with Laser Cut numbering to help quick selection. Includes a Pull Up Bar,  2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pullup bar on the 186cm model will prove less functional for taller users. Made from high quality 3.0mm 11 Gauge steel. Strong design - 400kg max load. Finished with a hard wearing hammertone gunmetal powder coat. Many other premium, affordable accessories are available with more being developed constantly. Hole diameter: 16.5mm. To suit attachments with a Pin Diameter of 15.5mm.  Olympic Barbell: (Full Description) Comes with Secure Grip and Spring Collars. Crafted from durable chrome steel with a knurled anti-slip grip. Specifications: Middle Bar Diameter: 2.8cm, Sleeve Diameter: 5cm. 6ft International = 186cm total length, 25cm sleeves; 7ft = 219cm total length, 40cm sleeves. Measurements may vary slightly. 300kg load capacity for reliable performance. Bumper Plate Specifications: (Full Description)  45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Rack Approx. Dimensions: Max Width: 133cm Width between uprights: 110cm.  The following vary according to selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm.   186 x 90 Max Height: 186cm, Max Depth: 111cm.   206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm. Important Information: The GM3 Power Rack must be bolted down. Each foot has 3 x 11mm holes, however floor fixings are not included. This is because the required fixings will vary depending on your floor type. Our fixing kit available separately is suitable for Masonry floors only. (Full Description) We strongly recommend consulting a builder to recommend fixings for your specific floor. Please note: Not suitable for commercial use.   The GYM MASTER GM3 Power Rack with Barbell and Weights Set is a fully customisable, heavy-duty strength training system designed for home gyms. Built with reinforced steel uprights and a durable black powder-coated finish, the GM3 offers exceptional stability and versatility with densely perforated uprights for accessory compatibility. This complete setup includes the GM3 Power Rack, adjustable J-hooks and spotter bars, a set of high-performance bumper plates (2x25kg, 2x20kg, 2x15kg, 2x10kg, 2x5kg), and your choice of either a 6ft International Olympic Barbell—ideal for compact spaces—or a full-sized 7ft Olympic Barbell. The rack is available in six height/depth configurations to suit any space: 186 x 60cm, 186 x 90cm, 206 x 60cm, 206 x 90cm, 226 x 60cm, 226 x 90cm. Engineered for squats, bench presses, deadlifts, and pull-ups, the GM3 is perfect for lifters seeking a customisable, space-efficient, and expandable solution to elevate their training.

GYM MASTER GM3 Power Rack With Bench, Barbell and Weights Set Available in two depths (60cm or 90cm) and three heights (186cm, 206cm, or 226cm) to suit any home gym layout. Choose from a 6ft International Olympic Barbell or a 7ft Olympic Barbell.  Set includes: GM3 Power Rack, GM3 Bench, Olympic Barbell and 5 pairs of black Olympic bumper plates (2x5kg, 2x10kg, 2x15kg, 2x20kg and 2x25kg). Power Rack Features: (Full Description) Fully adjustable uprights with laser-cut numbering for fast, accurate height adjustments. Includes a multi-grip pull-up bar, 2x Pin and Pipe Safety Bars, and 2x laser-cut J-Cups with UHMW lining to protect your barbell knurling. Note: The pull-up bar on 186cm models may be less suitable for taller users. Built from ultra-durable 3.0mm 11-Gauge Steel. Max Load Capacity: 400kg. Finished in a tough, stylish Gunmetal Hammertone Powder Coat. Upright hole diameter: 16.5mm, compatible with 15.5mm pin diameter attachments. GM3 Fully Adjustable FID Bench: (Full Description) Offers Flat, Incline, and Decline positions for maximum training variety. High-stability steel frame with easy angle adjustments and durable support rails. Finished in matching Gunmetal powder coat for a unified look. Nonslip textured cushions keep you secure and focused, rep after rep. Bench Dimensions: Total Length: 132cm Seat Height: 44cm Backrest Width: 30cm. Max Load: 350kg. Perfectly complements the GM3 rack for presses, flys, crunches, rows, and more. Olympic Barbell Options: (Full Description) Precision-crafted from chrome-coated steel with a knurled anti-slip grip. Includes secure grip spring collars. Specifications: 6ft International Bar: 186cm total length, 25cm sleeve length. 7ft Olympic Bar: 219cm total length, 40cm sleeve length. Middle bar diameter: 2.8cm. Sleeve diameter: 5cm. Max Load: 300kg. Measurements may vary slightly Bumper Plate Set (IWF Standard): (Full Description) 45cm diameter across all plates. Plate thicknesses (approx.): 5kg: 2cm, 10kg: 4cm, 15kg: 6cm, 20kg: 8cm, 25kg: 10cm Rack Dimensions by Configuration: Max Width: 133cm. Width Between Uprights: 110cm. The following vary according to selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm. Important Information: The GM3 Power Rack must be bolted down. Each foot has 3 x 11mm holes, however floor fixings are not included. This is because the required fixings will vary depending on your floor type. Our fixing kit available separately is suitable for Masonry floors only. (Full Description) We strongly recommend consulting a builder to recommend fixings for your specific floor. Please note: Not suitable for commercial use.

GM3 Power Rack Squat Cage with Dual Cable System and Bench. Available in two depths (60cm or 90cm) and two heights (206cm, or 226cm) to suit any home gym layout. Set Includes: GM3 Power Rack Cable System and GM3 FID Bench. Customisable Rack Configuration: (Full Description) Height x Depth Options: 206 x 60cm 206 x 90cm 226 x 60cm 226 x 90cm Power Rack Features: Fully adjustable uprights with laser-cut numbering for quick, precise height changes. Includes multi-grip pull-up bar, 2x Pin & Pipe Safety Bars, and 2x J-Cups with UHMW lining to protect barbell knurling. Constructed from ultra-durable 3.0mm 11-Gauge steel with a 400kg max load capacity. Finished in sleek Gunmetal Hammertone powder coat for long-lasting durability. Upright hole diameter: 16.5mm (compatible with 15.5mm pin attachments). The Pulley System is made from high quality steel and it has a max load of 180kg. It has Olympic 2" diameter weight poles. (Full Description) Approximate Rack and Pulley System Dimensions (See drawings for specifics): Max Heights: 206cm/226cm Max Depth: 153/178cm Max Width: 133cm Width between uprights: 110cm. Approx. Foot Plate: 30cm high (UK Mens size 12.5), 35cm wide. Loading space for olympic weights: 24cm per side. GM3 Fully Adjustable FID Bench: (Full Description) Supports Flat, Incline, and Decline positions for complete workout variety. High-stability steel frame with quick angle adjustments and durable support rails. Non-slip, textured cushions for secure lifting performance every session. Matching gunmetal finish complements the GM3 rack perfectly. Bench Dimensions: Length 132cm Seat Height 44cm Backrest Width 30cm. Max Load Capacity: 350kg.  Important Information: The GM3 Power Rack must be bolted down. Each foot has 3 x 11mm holes, however floor fixings are not included. This is because the required fixings will vary depending on your floor type. Our fixing kit available separately is suitable for Masonry floors only. (Full Description) We strongly recommend consulting a builder to recommend fixings for your specific floor. Please note: Plates are not included. Not suitable for commercial use.   Upgrade your home gym with the GM3 Weight Lifting Power Rack Squat Cage with Dual Cable System, paired with the GM3 Fully Adjustable Flat | Incline | Decline (FID) Weight Bench in a sleek gunmetal finish. This powerhouse combination is engineered for serious strength training, offering unmatched versatility and performance in a compact footprint. The GM3 Power Rack features a heavy-duty steel frame with laser-cut numbering, Westside hole spacing, and reinforced J-hooks for maximum safety. Its integrated dual cable pulley system with high and low stations supports a wide range of functional movements including lat pulldowns, rows, curls, and more. Complementing the rack is the GM3 FID Weight Bench, designed for stability and comfort. The bench adjusts easily from flat to incline to decline positions, with a wide, non-slip cushioned surface that provides excellent support during heavy lifts and dynamic movements. Together, this combo delivers full-body training capacity for users of all fitness levels.

GM3 Power Rack Cable System, Bench, 150kg Bumper Plates, and Optional 6ft Int'l or 7ft Barbell. Includes: GM3 Power Rack Cable System, GM3 FID Bench, Olympic Barbell and 5 pairs of black Olympic bumper plates (2x5kg, 2x10kg, 2x15kg, 2x20kg and 2x25kg), totalling 150kg. Power Rack & Dual Cable System: (Full Description) A comprehensive strength solution, this package centres around the versatile GM3 Power Rack with an integrated dual cable system for a full-body workout.  Space-Optimised Design: The GM3 Power Rack offers adaptable dimensions with two height choices (206cm / 226cm) and two depth options (60cm / 90cm) to fit various home gym spaces. Included is the GM3 Fully Adjustable Flat | Incline | Decline (FID) Weight Bench in Gunmetal, featuring nonslip cushions for maximum comfort and secure positioning during all exercises. (Full Description) Complete 150kg Bumper Plate Set, ideal for safe and effective Olympic lifting and general strength training. 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm (Full Description) 2" Diameter Olympic Barbell with Rotating Sleeves comes with Strong Spring Clip Collars to Keep Weights Secure. Good Quality, Long-Lasting Product. Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip. Barbell Specifications: Middle Bar Diameter: 2.8cm Sleeve Diameter: 5cm. 6ft International = 186cm, 25cm sleeves, 14kg. 7ft = 219cm, 40cm sleeves, 17kg. Measurements may vary slightly. Bench Approximate Dimensions: Length: 125.5cm. Base Width: 69.5cm. Height: 46cm (flat) - 125.5cm (highest). Backrest: 92cm (H), 30.5cm (Mid W), 24.5cm (Top W). Seat: 38.5cm (W), 36cm (D). Cushion: 5.5cm thick. Max Load: 450kg.  Approximate Rack and Cable System Dimensions (See drawings for specifics): Max Heights: 206cm/226cm, Max Depth: 153/178cm, Max Width: 133cm. Width between uprights: 110cm. Approx. Foot Plate: 30cm high (UK Mens 12.5), 35cm wide. Loading space for olympic weights: 24cm per side.  Important Information: The GM3 Power Rack must be bolted down. Each foot has 3 x 11mm holes, however floor fixings are not included. This is because the required fixings will vary depending on your floor type. Our fixing kit available separately is suitable for Masonry floors only. (Full Description) We strongly recommend consulting a builder to recommend fixings for your specific floor. Please note: Not suitable for commercial use.   Transform your training with the GYM MASTER all-in-one strength solution! This comprehensive package includes our robust GM3 Power Rack with an integrated Dual Cable System, offering unparalleled versatility for a full-body workout. The GM3 Power Rack is available to fit your space perfectly, with two height options (206cm or 226cm) and two depth options (60cm or 90cm). This set is further enhanced with a high-quality adjustable weight bench and a substantial 150kg bumper plate set for safe and effective lifting. To complete your setup, choose your ideal lifting partner: an optional 6ft or 7ft international Olympic barbell. Whether you're performing squats, bench presses, lat pulldowns, cable rows, pull-ups, or a multitude of other exercises, this complete GYM MASTER home gym set provides the stability, durability, and functionality you need to achieve your fitness goals from the comfort of your home.

GM3 Power Rack Cable System 150kg Plates and Optional 6ft Int'l or 7ft Barbell Home Gym Package Includes: GM3 Power Rack Cable System, Olympic Barbell and 5 pairs of black Olympic bumper plates (2x5kg, 2x10kg, 2x15kg, 2x20kg and 2x25kg), 150kg total. Integrated Strength Training: (Full Description) This package delivers a comprehensive strength solution centered around the highly versatile GM3 Power Rack, complete with an integrated dual cable system for dynamic, full-body workouts. Customisable for your space, the GM3 Power Rack offers a space-optimised design with adaptable dimensions. You can choose from two heights (206cm / 226cm) and two depth options (60cm / 90cm) to perfectly fit your setup. Complete 150kg Bumper Plate Set: (Full Description) Elevate your Olympic lifting and general strength training safely and effectively with this 150kg bumper plate set. Each 45cm diameter plate (IWF standard) is engineered for durability, with approximate thicknesses: 5kg (2cm), 10kg (4cm), 15kg (6cm), 20kg (8cm), and 25kg (10cm). High-Quality Olympic Barbell: (Full Description) Our 2" diameter Olympic barbells are built to last, featuring smooth rotating sleeves and strong spring clip collars to keep your weights securely in place. The knurled anti-slip hand grip ensures a constant, secure hold throughout your toughest lifts. Barbell Options & Specifications: Middle Bar Diameter: 2.8cm. Sleeve Diameter: 5cm. 6ft International Bar: 186cm long, 25cm sleeves, 14kg. 7ft Bar: 219cm long, 40cm sleeves, 17kg. (Please note: Measurements may vary slightly). Rack & Cable System Approx. Dimensions: Max Heights: 206cm/226cm Max Depth: 153cm/178cm Max Width: 133cm. The width between uprights is 110cm. 24cm loading space for Olympic weights on each side. Approx. Foot Plate: 30cm high (UK Mens 12.5), 35cm wide. Important Information: The GM3 Power Rack must be bolted down. Each foot has 3 x 11mm holes, however floor fixings are not included. This is because the required fixings will vary depending on your floor type. Our fixing kit available separately is suitable for Masonry floors only. (Full Description) We strongly recommend consulting a builder to recommend fixings for your specific floor. Please note: Not suitable for commercial use.   Transform your home gym with the ultimate GYM MASTER GM3 Weight Lifting Power Rack Squat Cage, complete with an integrated Dual Cable System. This powerhouse rack is engineered for serious strength training, offering a secure platform for squats, bench presses, overhead presses, and pull-ups. The innovative dual cable system expands your training possibilities, enabling a vast array of exercises for comprehensive muscle engagement. Designed to adapt to your space, the GM3 power rack is available in two height options (206cm or 226cm) and two depth options (60cm or 90cm). This package comes with the complete set of 150kg GYM MASTER bumper plates, including pairs of 25kg, 20kg, 15kg, 10kg, and 5kg. To perfectly match your lifting style, you can choose between a versatile 6ft International Barbell or a robust 7ft Barbell.

GYM MASTER Olympic Weight Bar and Choice of Bumper Weight Plates Choose between our full set of Bumper Plates, which includes five pairs totalling 150kg, with a choice of five different Barbells. Or our 50kg set of Bumper Plates and your choice between five different Barbells. Plates: (Full Description) Solid rubber construction absorbs impact - Stainless steel centre ring. Suitable for use on all 2"/50mm Olympic diameter bars. 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm. Barbell: (Full Description) Comes with Strong Spring Clip Collars to Keep Weights Secure. Good Quality, Long-Lasting Product. Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip. Barbell Specifications: Middle Bar Diameter: 2.8cm Sleeve Diameter: 5cm 4ft = 120cm, 17cm sleeves 5ft = 152cm, 27cm sleeves 6ft = 182cm, 32cm sleeves 6ft Int'l = 186cm, 25cm sleeves 7ft = 219cm, 40cm sleeves. Measurements may vary slightly. Please Note: Not Suitable for Commercial Use.   Upgrade your strength training with the GYM MASTER Olympic Barbell & Bumper Plate Sets, designed for serious lifters and beginners. The solid steel Olympic barbell, available in sizes from 4ft to 7ft, features knurled non-slip grips, rotating sleeves for friction-free movement, and quick-release spring collars for easy weight changes. Paired with your choice of high-quality rubber bumper plates. Choose between our full set of bumper plates (2 x 25kg, 2 x 20kg, 2 x 15kg, 2 x 10kg, and 2 x 5kg), or our 50kg set (2 x 20kg and 2 x 5kg). Both of these sets are ideal for Olympic weightlifting and deadlifts. Each bumper plate meets IWF standards with a 45cm diameter and offers excellent shock absorption to protect your bar and floor. Built for home gyms, our sets enable safe, effective progression and peak performance in every lift.

GYM MASTER Olympic Bar and Cast Iron Weight Plates Set. Choose from five barbell sizes (4ft, 5ft, 6ft, 6ft Int'l & 7ft) to suit your training space and style. Set includes a Olympic barbell and 107.5kg of cast iron weights - 2x1.25kg, 2x2.5kg, 2x5kg, 2x10kg, 2x15kg and 2x20kg Each bar features a knurled anti-slip grip and includes a pair of strong spring collars for safe, stable lifting. High-quality, long-lasting Olympic bar paired with durable cast iron plates designed to handle regular training sessions. Plates feature an ergonomic tri-grip layout for easy handling and are compatible with all 2" Olympic bars. Barbell Specifications: (Full Description) Middle Bar Diameter: 2.8cm Sleeve Diameter: 5cm. 4ft = 120cm, 17cm sleeves 5ft = 152cm, 27cm sleeves 6ft = 182cm, 32cm sleeves 6ft Int'l = 186cm, 25cm sleeves 7ft = 219cm, 40cm sleeves Measurements may vary slightly. Approximate plate thicknesses: (Full Description) 1.25kg: 1.8cm 2.5kg: 2.3cm 5kg: 3cm 10kg: 3cm 15kg: 3.8cm 20kg: 4.2cm Measurements may vary slightly. Please Note: Not Suitable for Commercial Use.   The GYM MASTER Olympic Bar and Cast Iron Weight Plates Set – a perfect strength training solution designed for performance, durability, and versatility. Whether you're grinding through early morning deadlifts or closing the day with heavy squats, this set delivers the feel and function lifters crave. The solid Olympic bar offers a smooth grip and balanced rotation, making every lift more fluid and controlled. Combined with the cast iron plates, each rep feels grounded in quality, no frills, no shortcuts. The tri-grip design of the plates adds a practical edge, making transitions fast and frustration-free. You’ll find yourself lifting harder, training longer, and feeling more connected to the process. 

GYM MASTER Standard Bar and Cast Iron Weight Plates Set. Choose from four barbell sizes (4ft, 5ft, 6ft & 7ft) to suit your training space and style. Set includes a Standard barbell and 107.5kg of cast iron weights - 2x1.25kg, 2x2.5kg, 2x5kg, 2x10kg, 2x15kg and 2x20kg Designed for home strength training, this complete set includes a durable standard barbell and solid cast iron plates, ideal for squats, bench presses, deadlifts, and more. Barbell: (Full Description) Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip.  Good Quality, Long-Lasting Product. Load Capacity: 150kg. Barbell Dimensions: Bar Diameter: 2.5cm. 4ft = 120cm, 19cm sleeves, 79cm middle bar 5ft = 150cm, 27cm sleeves, 93cm middle bar 6ft = 180cm, 32cm sleeves, 113cm middle bar 7ft = 220cm, 40cm sleeves, 137cm middle bar Measurements may vary slightly. Approximate plate thicknesses: (Full Description) 1.25kg: 2cm 2.5kg: 2.5cm 5kg: 2.6cm 10kg: 3.5cm 15kg: 3.7cm 20kg: 4cm. Measurements may vary slightly. Please Note: Not Suitable for Commercial Use.   Elevate your home workouts with the GYM MASTER Standard Barbell and Weight Plate Set, crafted for strength training enthusiasts who demand quality and performance. This set includes your choice of standard barbell, made from high-grade steel with a chrome finish for lasting durability. Each barbell features a precision knurled grip for enhanced control and comfort during heavy lifts. These bars are ideal for a wide range of exercises such as squats, bench presses, and deadlifts, providing a stable and safe lifting experience. Accompanying the barbells are standard weight plates, engineered from solid cast iron for long-term reliability and balanced performance. Each plate is embossed with clear weight markings. Whether you're building a new home gym or upgrading your current setup, our set delivers the durability, functionality, and versatility needed to support every stage of your strength training journey.

GYM MASTER Black Bumper Plates Set & Coloured Change Plates & Storage Trolley.  Includes 5 pairs of black Olympic bumper plates (x2 5kg, x2 10kg, x2 15kg, x2 20kg and x2 25kg), 5 pairs of Coloured Change Plates (x2 0.5kg, x2 1kg, x2 1.5kg, x2 2kg and x2 2.5kg) & Storage trolley. Total plate weight 165kg Storage Trolley: (Full Description) Easy to load and unload with rear castor wheels and front handle for smooth movement; finished in durable hammertone gunmetal powder coat.  Fractional plates: (Full Description) Perfect for micro loading and helping you progress on challenging lifts. Made from solid rubber. Calibrated to +/- 10g. Fractional Change Plate Specifications: Approx Dimensions: 0.5kg: 13.5cm ⌀ x 1.1cm. 1kg: 16m ⌀ x 1.5cm. 1.5kg: 17cm ⌀ x 1.9cm. 2kg: 19cm ⌀ x 1.85cm. 2.5kg: 23cm ⌀ x 2.5cm. Bumper plates: (Full Description) Features solid rubber construction to absorb impact and reduce noise. Suitable for use on all 2"/50mm Olympic diameter bars  Bumper Plate Specifications: 45cm diameter (IWF standard). Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Trolley Approx Dimensions:   Total height: 30cm - Total width: 40cm - Total length: 157cm. Max Load: 500kg. Please Note: Not Suitable for Commercial Use.