Adjustable Squat Rack Cage

GYM MASTER Half Power Rack Cage. Heavy duty reinforced steel tube frame. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Pull up bar with wide and neutral grip design. Includes 2 adjustable dip bar accessories. Gunmetal coated finish. 50mm x 50mm steel frame tubes. 20 increment settings at the front and 26 at the rear. Large 200kg barbell max load. 200kg pull up max load. Please Note: Suits 6Ft International, or 7 foot bars. Assembled dimensions: Height: 210cm - Width: 119cm - Depth: 136cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER Power Rack Cage. Solid heavy duty steel. Solid steel pull up bar with heavy duty textured grip. 50mm x 50mm steel frame tubes. Fully adjustable with 21 different settings. Gunmetal coated finish. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Compatible with the GYM MASTER 6ft and 7 ft standard and Olympic barbells. Secure protective rubber feet. Compatible with a range of attachments. 260kg max barbell load. 210kg max pull up load. Please Note: Suits 6 Ft International, or 7 foot bars. Assembled dimensions: Height: 209cm - Width: 110cm - Depth: 112.5cm. Please Note: Not Suitable for Commercial Use. Heavy duty steel power rack cage, with textured grip and adjustable settings.

GM2 Half Power Squat Rack Cage with Optional Weight Storage and Spotters Finished with a hard wearing hammertone gunmetal powder coat Fully Adjustable Power Rack - 36 Levels with Upgraded Westside Spacing and Laser Cut numbering to help quick selection. Made from High Grade 60x60 2.0mm steel, this Half Power Rack Includes a Pull Up Bar and 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Strong design - 350kg max load. Suits 6 Ft International, or 7 foot bars. Pre-drilled with 11mm diameter holes but floor fixings are not included because they will vary depending on your floor type. Optionally include the Olympic Bolt On Storage System Upgrade and/or 2 x GM3 Safety Spotters The Olympic Bolt On Storage System Upgrade is made from 50x50 14 gauge steel and boasts 4 Olympic Storage Poles on each side. Approximate Overall Dimensions: Cage Dimensions: Height: 221cm (MAX) Width at widest point: 124cm Depth: 149cm. GM3 Spotters: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Weight Storage Add On: Height: 187cm. Depth: 52cm. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Please Note: Not Suitable for Commercial Use. Our GM2 Half Power Rack is a superb rack for any home or garage gym. With many optional attachments such as Weight Storage and Spotters, this Half Cage will comfortably cater for most home workouts. The frame is made from 14 gauge reinforced steel with 36 adjustable levels, and the height levels are laser cut to make adjustments quick and easy. As standard, this cage includes heavy duty J-Cups with UHMW upgraded pads to protect your barbell.

GYM MASTER GM1 Power Rack Squat Cage Fully Adjustable Power Rack - 25 Levels with Laser Cut numbering to help quick selection. It includes a Multi Grip Pull Up Bar, 2 x Full Length Solid Steel Safety Bars, and 2 x High Spec Laser Cut J-Cups with HDPE to protect your Barbells. The GM1 Power Rack is made from high quality 2.0mm steel and it has a strong design and a 250kg max load. Optional GM1 Cable Pulley System The optional GM1 Cable Pulley System is a great bolt-on system which is easy to add to the GM1 Power Rack using pre-drilled holes in the frame.  It includes a straight bar and a wide lat pull down bar as shown in the photos. It has standard 1″ Diameter weight poles and 2″ Olympic Weight Plate adapters. It has a 130kg Max Load Exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls.  Many other accessories are also available for the GM1 Power Rack Cage. Suits 6ft International, or 7ft bars. Please Note: The multi grip pull up bar can be mounted upside down to reduce the total height of the Power Rack on it's own to approximately 204cm Approx Dimensions - Power Rack Only Height: 213cm (Max) Width: 149cm Depth: 121.5cm Width between spotters: 112.5cm. Approx Dimensions - Power Rack with Cable System fitted Max Height: 215cm Max Width: 149cm (Unchanged) Max Depth: 172.5cm Weight Stack Pole Length: 20cm Straight Bar Width: 50cm Pull Down Bar Width: 99cm Please note: Not suitable for commercial use. Power Rack with Cable System Our GM1 Power Rack is a brilliant rack for any home or garage gym. With many optional attachments including a Cable System, this Cage will comfortably accommodate most home workouts. The Power Rack has 25 adjustable levels. The frame is made from 14 gauge reinforced steel, and the height levels are laser cut every 5 holes to make adjustments quick and easy. The Cage includes J-Cups with HDPE upgraded pads to protect your barbell. 2 Full Length Safety Bars in Chrome and a Multi Grip Solid Steel Pull Up Bar With Heavy Duty Textured Metal Grip.

GYM MASTER GM2 Half Power Rack Set With Bench Barbell and Bumper Weight Plates. Heavy-Duty Adjustable Power Rack: Features 36 height levels, Westside spacing, and laser-cut numbering for precision.  Built from 60x60 2.0mm high-grade steel with a 350kg max load capacity.  Premium Attachments Included – Comes with a pull-up bar, 2 GM3 safety spotters, and 2 laser-cut J-cups with UHMW lining to protect barbells. Olympic Bolt-On Storage System: Made from 50x50 14-gauge steel, with 4 Olympic storage poles on each side for easy access to weight plates. Barbell specification: Middle Bar Diameter: 2.5cm, Sleeve Diameter: 5cm, Length 186cm, 25cm sleeves. Bench & Plate Specifications: Bench: 45cm height (flat), 121.5cm (max), 91cm backrest height. Seat: 31cm width, 33cm depth, 6cm cushion thickness. IWF standard 45cm plates, thickness: 5kg: 2cm, 25kg: 10cm. Rack & Storage Dimensions: Height 221cm (MAX), Width 124cm, Depth 149cm. GM3 Spotters: 54.5cm barbell rest, 64cm length, 30cm height. Weight storage add-on: 187cm height, 52cm depth. Tighten all bolts by hand first for proper alignment. Note: Not suitable for commercial use.   Upgrade your home gym with this premium strength training set, featuring a heavy-duty half rack, an adjustable workout bench, a high-quality Olympic barbell, secure barbell collars, and a full set of bumper plates (5kg to 25kg). The half rack offers a sturdy frame for squats, bench presses, and pull-ups, with multiple adjustment points for versatility. The adjustable bench provides incline, flat, and decline positions to target different muscle groups. The Olympic barbell is designed for durability and smooth performance, while the bumper plates allow for safe and effective weightlifting. Perfect for both beginners and experienced lifters, this set is built to last and supports a wide range of workouts. Ideal for home gyms, garages, or commercial setups, it provides everything you need for strength training in one complete package.

GYM MASTER Flat Weightlifting Bench. Heavy duty construction. Ideal for dumbbell, barbell and cable exercises. Extra thick padded seat cushion. Hard wearing gunmetal finish. Ideal for home or garage gyms. Comes with a wide rear base and single-column front foot, allowing for more foot room when setting up for a range of exercises Large Max Load: 300kg. Dimensions (See Drawing): Overall Length: 110cm. Width At Widest Point: 63cm. Overall Height: 40cm. Padded Bench Width: 25cm. Padded Bench Length: 110cm. Please Note: Not Suitable for Commercial Use. Flat weightlifting bench for a range of weight exercises, with a sturdy construction. Introducing the GYM MASTER Flat Weightlifting Bench. Easy to move around your home gym yet strong and sturdy. Perfect for extra cable exercises and constructed from steel to allow a max user weight of 300kg.

GYM MASTER GM2 Fully Adjustable Flat | Incline | Decline FID Weight Bench - Gunmetal with Nonslip Cushions 7 backrest angles and 4 seat angles - Suitable for flat and incline exercises. Max Cushion Gap of 55mm Perfect for dumbbell exercises, bench presses etc - Built in handle and castors for easy movement - Extra thick comfortable black padded cushions Strong steel frame - Easy to assemble - Instruction manual included. Rubber feet provide extra grip and protect your floor. Please Note: You will require 10mm, 13mm and 17mm spanners for assembly. Approximate Dimensions: Overall Length: 128cm. Base width: 60cm. Height: 45cm when flat - 121.5cm in highest position. Backrest Height: 91cm. Backrest Width 24cm-31cm. Seat Width at back: 31cm. Seat Depth: 33cm. Cushion thickness: 6cm. Not Suitable for Commercial Use. Max Load: 260kg. This fully adjustable weight bench is ideal for a home gym, as it offers a range of motion, which allows the user to chose which is the ideal platform for each of their exercises. Offering a flat, incline and decline option, this bench makes swapping your routine simple and quick.

GYM MASTER GM2 Fully Adjustable Flat | Incline | Decline FID Weight Bench - Gunmetal with Wide Backrest and Nonslip Cushions 7 backrest angles and 4 seat angles - Suitable for flat and incline exercises. Max Cushion Gap of 55mm. Perfect for dumbbell exercises, bench presses etc - Built in handle and castors for easy movement - Extra thick comfortable black padded cushions Strong steel frame - Easy to assemble - Instruction manual included. Rubber feet provide extra grip and protect your floor. Please Note: You will require 10mm, 13mm and 17mm spanners for assembly. Approximate Dimensions: Length: 128cm. Base Width: 60cm. Height: 45cm (flat) - 121.5cm (highest). Backrest: 91cm (H), 32cm (W). Seat: 30cm (W), 32cm (D). Cushion Thickness: 6cm. Max Load: 260kg. Please Note: Not Suitable for Commercial Use. The wide backrest of this adjustable weight bench is ideal for ensuring that you stay in the correct position and maintain your form when weight lifting. It also gives it a strong base for different exercises.