GM3 Fully Adjustable Flat | Incline | Decline FID Weight Bench - Gunmetal with Nonslip Cushions

GYM MASTER GM2 Fully Adjustable Flat | Incline | Decline FID Weight Bench - Gunmetal with Wide Backrest and Nonslip Cushions 7 backrest angles and 4 seat angles - Suitable for flat and incline exercises. Max Cushion Gap of 55mm. Perfect for dumbbell exercises, bench presses etc - Built in handle and castors for easy movement - Extra thick comfortable black padded cushions Strong steel frame - Easy to assemble - Instruction manual included. Rubber feet provide extra grip and protect your floor. Please Note: You will require 10mm, 13mm and 17mm spanners for assembly. Approximate Dimensions: Length: 128cm. Base Width: 60cm. Height: 45cm (flat) - 121.5cm (highest). Backrest: 91cm (H), 32cm (W). Seat: 30cm (W), 32cm (D). Cushion Thickness: 6cm. Max Load: 260kg. Please Note: Not Suitable for Commercial Use. The wide backrest of this adjustable weight bench is ideal for ensuring that you stay in the correct position and maintain your form when weight lifting. It also gives it a strong base for different exercises.

GYM MASTER GM1 Power Rack Squat Cage Fully Adjustable Power Rack - 25 Levels with Laser Cut numbering to help quick selection. It includes a Multi Grip Pull Up Bar, 2 x Full Length Solid Steel Safety Bars, and 2 x High Spec Laser Cut J-Cups with HDPE to protect your Barbells. The GM1 Power Rack is made from high quality 2.0mm steel and it has a strong design and a 250kg max load. Gunmetal Powder Coated Finish Optional GM1 Cable Pulley System The optional GM1 Cable Pulley System is a great bolt-on system which is easy to add to the GM1 Power Rack using pre-drilled holes in the frame.  It includes a straight bar and a wide lat pull down bar as shown in the photos. It has standard 1″ Diameter weight poles and 2″ Olympic Weight Plate adapters. It has a 130kg Max Load Exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls.  Many other accessories are also available for the GM1 Power Rack Cage. Suits 6ft International, or 7ft bars. Please Note: The multi grip pull up bar can be mounted upside down to reduce the total height of the Power Rack on it's own to approximately 204cm Approx Dimensions - Power Rack Only Height: 213cm (Max) Width: 149cm Depth: 121.5cm Width between spotters: 112.5cm. Approx Dimensions - Power Rack with Cable System fitted Max Height: 217.5cm Max Width: 149cm (Unchanged) Max Depth: 172.5cm Weight Stack Pole Length: 20cm Straight Bar Width: 50cm Pull Down Bar Width: 99cm Please note: Not suitable for commercial use. Power Rack with Cable System Our GM1 Power Rack is a brilliant rack for any home or garage gym. With many optional attachments including a Cable System, this Cage will comfortably accommodate most home workouts. The Power Rack has 25 adjustable levels. The frame is made from 14 gauge reinforced steel, and the height levels are laser cut every 5 holes to make adjustments quick and easy. The Cage includes J-Cups with HDPE upgraded pads to protect your barbell. 2 Full Length Safety Bars in Chrome and a Multi Grip Solid Steel Pull Up Bar With Heavy Duty Textured Metal Grip.

GYM MASTER Power Rack Cage. Solid heavy duty steel. Solid steel pull up bar with heavy duty textured grip. 50mm x 50mm steel frame tubes. Fully adjustable with 21 different settings. Gunmetal coated finish. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Compatible with the GYM MASTER 6ft and 7 ft standard and Olympic barbells. Secure protective rubber feet. Compatible with a range of attachments. 260kg max barbell load. 210kg max pull up load. Please Note: Suits 6 Ft International, or 7 foot bars. Assembled dimensions: Height: 209cm - Width: 110cm - Depth: 112.5cm. Please Note: Not Suitable for Commercial Use. Heavy duty steel power rack cage, with textured grip and adjustable settings.

GYM MASTER Heavy Duty Half Power Cage Squat Rack with 20 x 5cm increments at the front and 26 at the rear Excellent piece of equipment for bench press exercises & squats, ensuring full safety when working out. Also well suited to dips, weighted pull ups etc Includes 2 full length safety bars in chrome, 2 chrome barbell rests, and 2 adjustable dip bar accessories as shown. Large 200kg barbell & 200kg pull up max load. 50mm heavy duty reinforced steel tube frame. Suits 6ft international, or 7ft bars. Dimensions (See Drawing): Overall height: 210cm Overall width: 119cm Depth: 136cm Please Note: Tools required for assembly are not included. Not suitable for commercial use.

GM2 Half Power Squat Rack Cage with Optional Weight Storage and Spotters Finished with a hard wearing hammertone gunmetal powder coat Fully Adjustable Power Rack - 36 Levels with Upgraded Westside Spacing and Laser Cut numbering to help quick selection. Made from High Grade 60x60 2.0mm steel, this Half Power Rack Includes a Pull Up Bar and 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Strong design - 350kg max load. Suits 6ft International, or 7ft bars. Pre-drilled with 11mm diameter holes but floor fixings are not included because they will vary depending on your floor type. Optionally include the Olympic Bolt On Storage System Upgrade and/or 2 x GM3 Safety Spotters The Olympic Bolt On Storage System Upgrade is made from 50x50 14 gauge steel and boasts 4 Olympic Storage Poles on each side. Approximate Overall Dimensions: Cage Dimensions: Height: 221cm (MAX) Width at widest point: 124cm Depth: 149cm. GM3 Spotters: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Weight Storage Add On: Height: 187cm. Depth: 52cm. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Not Suitable for Commercial Use. Our GM2 Half Power Rack is a superb rack for any home or garage gym. With many optional attachments such as Weight Storage and Spotters, this Half Cage will comfortably cater for most home workouts. The frame is made from 14 gauge reinforced steel with 36 adjustable levels, and the height levels are laser cut to make adjustments quick and easy. As standard, this cage includes heavy duty J-Cups with UHMW upgraded pads to protect your barbell.

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip on the bar 2" Clip Collars to Keep Weights Secure whilst on the Olympic barbell. Good Olympic Quality, Long-Lasting Product. Load Capacity: 300kg. Olympic Barbell Weights: 4ft = 7.4kg. 5ft = 11.3kg. 6ft = 14kg. 6ft International = 14kg. 7ft = 17kg. Specifications: Middle Barbell Diameter: 2.8cm. 2" Sleeve Diameter: 5cm. 4ft = 120cm, 17cm Sleeves 5ft =152cm, 27cm sleeves 6ft =183cm, 32cm sleeves 6ft International =186cm, 25cm sleeves 7ft =219cm, 40cm sleeves Please note: No Olympic Weight Plates Included. Measurements May Differ Slightly. Not Suitable for Commercial Use. Your order will be posted together (2" Olympic barbell and spring clip collars), however couriers may deliver the items separately. 2 inch olympic barbell made from heavy duty chrome steel, with quick release spring clip collars and knurled hand grips. Ideal for home gyms, and suitable for a range of exercises, including Olympic lifting, the rotating sleeve allows weight plates to be changed quickly, and easily, due to its spring clip collars while keeping the plates securely in place, whilst using the barbell. Due to the anti-slip hand grips of the barbell, no matter how hard you push yourself, that you ensure your grip remains. The clips also ensure Also, it fits all standard 2 inch Olympic weight plates (not included) This free weight set up will help you to achieve all your fitness goals!

GYM MASTER Flat Weightlifting Bench. Heavy duty construction. Ideal for dumbbell, barbell and cable exercises. Extra thick padded seat cushion. Hard wearing gunmetal finish. Ideal for home or garage gyms. Comes with a wide rear base and single-column front foot, allowing for more foot room when setting up for a range of exercises Large Max Load: 300kg. Dimensions (See Drawing): Overall Length: 110cm. Width At Widest Point: 63cm. Overall Height: 40cm. Padded Bench Width: 25cm. Padded Bench Length: 110cm. Please Note: Not Suitable for Commercial Use. Flat weightlifting bench for a range of weight exercises, with a sturdy construction. Introducing the GYM MASTER Flat Weightlifting Bench. Easy to move around your home gym yet strong and sturdy. Perfect for extra cable exercises and constructed from steel to allow a max user weight of 300kg.

GYM MASTER Hex Dumbbell Weights. Use These Hex Dumbbells In your Fitness Routine to Improve Muscle Tone and Burn Off Excess Fat. Rubber Coated to Protect Your Floors. Hexagonal Design Prevents Rolling. Durable Cast Iron Core. Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip. The Full Set option consists of Pairs of all weight options totalling 292KG. Please Note: We apply a thin coating of lubricant to each dumbbell to help reduce the risk of scratches during transit. Wipe clean before use. Not Suitable for Commercial Use.   Introducing the GYM MASTER Hex Dumbbell Weights for a full body workout. Choose from our premium hex dumbbells ranging from 1kg to 30kg. Build muscle mass, strength or shape up with this range of premium dumbbells.