Olympic Multi Grip Football | Swiss Bar in Gunmetal

GYM MASTER 2" Black Rubber Bumper Plates for Olympic Barbell Weight Lifting Sold in Pairs Solid rubber construction absorbs impact - Stainless steel centre ring Printed GYM MASTER logo and raised weight label Suitable for use on all 2" / 50mm Olympic diameter bars  45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Please Note: The 150KG Full Set option includes 5 pairs of Bumper Plates. The 100KG Set option includes 4 pairs of Bumper Plates. Not Suitable for Commercial Use. 

GYM MASTER 2" Coloured Rubber Bumper Plates for Olympic Barbell Weight Lifting Sold in Pairs Solid rubber construction absorbs impact - Stainless steel centre ring Printed GYM MASTER logo and raised weight label Suitable for use on all 2" / 50mm Olympic diameter bars  45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 9.1cm. Please Note: The 150KG Full Set option includes 5 pairs of Bumper Plates. The 100KG Set option includes 4 pairs of Bumper Plates. Not Suitable for Commercial Use. 

GYM MASTER Cast Iron 2" Olympic Tri-Grip Weight Plates. Available in pairs of 1.25kg, 2.5kg, 5kg, 10kg, 15kg, 20kg weight increments as well as a Full Set (107.5kg). Tri-grip design for easy pick up and loading. Suitable for strength training, cardio, and conditioning exercises. Different weight options for progressive weight training. Cast iron design. Suitable for use with 2" Olympic bars. Please note: bar not included. Not Suitable for Commercial Use.

GYM MASTER Pair of Rubber Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress. Made from solid rubber. Sold in Pairs of Fractional plates. Calibrated to +/- 10g. Suitable for use on all 2"/50mm Olympic diameter bars. Approximate Dimensions: 0.5kg: 13.5cm ⌀ x 1.1cm. 1kg: 16cm ⌀ x 1.5cm. 1.5kg: 17cm ⌀ x 1.9cm. 2kg: 19cm ⌀ x 1.85cm. 2.5kg: 23cm ⌀ x 2.5cm Please Note: Not Suitable for Commercial Use. Use these Fractional Change Plates to increase your one-rep maximum - perfect for Micro Loading exercises and lifts where you are struggling to progress. Excellent for developing body muscle, balance and co-ordination. These rubber plates fit 2" Olympic weight bars. The plates range in weight from 0.5 kg to 2.5 kg, or you can buy a full set

GYM MASTER Pair of Chrome Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress Made from Hard Wearing Chrome Plated Steel. Sold in Pairs. Calibrated to +/ - 10G. Laser Engraved GYM MASTER logo and weight label Suitable for use on all 2" / 50mm Olympic diameter bars Dimensions: 0.25kg: 10.5cm ⌀ x 0.5cm. 0.5kg: 10.5cm ⌀ x 1cm. 0.75kg: 10.5cm ⌀ x 1.5cm. 1kg: 10.5cm ⌀ x 2cm Please Note: Not Suitable for Commercial Use. Are you looking to take your weightlifting to the next level? Look no further than these Fractional Change Plates. Designed for micro loading exercises and lifts, these plates are perfect for anyone struggling to progress in their lifts. With their ability to increase your one-rep maximum, these plates are excellent for developing your body muscle, balance, and coordination. One of the standout features of these plates is their chrome plating. Not only does this give them a sleek and polished look, but it also provides them with durability and strength. Unlike standard cast plates, these plates are more robust and built to last. Another great thing about these plates is their versatility. They fit 2" Olympic weight bars, which means they can be used in a variety of exercises and lifts. Whether you're doing squats, deadlifts, or any other Olympic-style lift, these plates will help you take your workout to the next level. With a range of weights available, from 0.25 kg to 1 kg, you can easily find the perfect set to suit your needs. And for those who are always on the go, there's even an option to get a set that includes a travel bag, making it easy to take your plates with you wherever you go. But these plates aren't just for seasoned weightlifters. They're also great for beginners who are just starting out on their fitness journey. By using these plates, you can gradually increase the weight you lift, building up your strength and endurance over time. So if you're looking to take your weightlifting to the next level, consider investing in a set of Fractional Change Plates. With their durability, versatility, and ability to help you progress in your lifts, they're a must-have for any serious weightlifter.

GYM MASTER Pair of 2" Olympic Barbell Quick Release Collars. Universal Fit for All Olympic Size Bars - A Great Upgrade for Basic Collars on Curl Bars, Tricep Bars, Dumbbell Bars, Barbell Bars etc. Simple 'One Click' Lock Design for Easy and Quick Removal and Stronger Than Standard Spring Collars. Made From Solid Nylon Resin and Interior Rubber Grips to Prevent Weights from Slipping During Use. Approximate Dimensions: Internal Diameter: 2" / 50mm Overall Height: 8.6cm Overall Width: 9.1.cm. Please Note: Not Suitable for Commercial Use. Introducing the GYM MASTER Quick Release Olympic Barbell Collars. The most efficient way of securing your weights to your GYM MASTER Olympic barbell without losing time between sets. The hard-wearing “one click” snap lock design with rubber inserts help secure your weights and protect your barbell from scratches and marks.

GYM MASTER GM1 Power Rack Squat Cage Fully Adjustable Power Rack - 25 Levels with Laser Cut numbering to help quick selection. It includes a Multi Grip Pull Up Bar, 2 x Full Length Solid Steel Safety Bars, and 2 x High Spec Laser Cut J-Cups with HDPE to protect your Barbells. The GM1 Power Rack is made from high quality 2.0mm steel and it has a strong design and a 250kg max load. Gunmetal Powder Coated Finish Optional GM1 Cable Pulley System The optional GM1 Cable Pulley System is a great bolt-on system which is easy to add to the GM1 Power Rack using pre-drilled holes in the frame.  It includes a straight bar and a wide lat pull down bar as shown in the photos. It has standard 1″ Diameter weight poles and 2″ Olympic Weight Plate adapters. It has a 130kg Max Load Exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls.  Many other accessories are also available for the GM1 Power Rack Cage. Suits 6ft International, or 7ft bars. Please Note: The multi grip pull up bar can be mounted upside down to reduce the total height of the Power Rack on it's own to approximately 204cm Approx Dimensions - Power Rack Only Height: 213cm (Max) - 204cm if pull up bar inverted Width: 149cm Depth: 121.5cm Width between spotters: 112.5cm. Approx Dimensions - Power Rack with Cable System fitted Max Height: 217.5cm Max Width: 149cm (Unchanged) Max Depth: 172.5cm Weight Stack Pole Length: 20cm Straight Bar Width: 50cm Pull Down Bar Width: 99cm Please note: Not suitable for commercial use. Power Rack with Cable System Our GM1 Power Rack is a brilliant rack for any home or garage gym. With many optional attachments including a Cable System, this Cage will comfortably accommodate most home workouts. The Power Rack has 25 adjustable levels. The frame is made from 14 gauge reinforced steel, and the height levels are laser cut every 5 holes to make adjustments quick and easy. The Cage includes J-Cups with HDPE upgraded pads to protect your barbell. 2 Full Length Safety Bars in Chrome and a Multi Grip Solid Steel Pull Up Bar With Heavy Duty Textured Metal Grip.

GM2 Half Power Rack Squat Cage with Optional Cable Pulley System, Weight Storage and Spotters. Finished with a hard wearing hammertone gunmetal powder coat Fully adjustable half power rack - 36 Levels with upgraded westside spacing and laser cut numbering to help quick selection. Made from high grade 60mm x 60mm 2.0mm steel. Includes a pair of J-Cups which feature high-quality UHMW liners to absorb impact, reduce noise, and protect against barbell damage. Strong design - 350kg max load. Suits 6ft International, or 7ft bars. Pre-drilled with 11mm diameter holes (Floor fixings are not included and will vary depending on your floor type). The optional cable pulley system includes lat pull down bar and straight bar, perfect for lat pulldowns, seated rows, push downs, bicep curls and various other exercises. Note: You will need to interchange the top bar. Simply bolt the Cable pulley system onto the pre-existing holes.  Incorporate the Olympic bolt on storage system, made from 50x50 14 gauge steel, which boasts eight Olympic weight storage poles (the storage system is not compatible with standard 1" plates). Add x2 GM3 safety spotters to train heavy and solo with complete peace of mind, providing safety in the event of a failed lift. Approx. Dimensions: Half rack: Height 221cm (MAX), Width 124cm, Depth 149cm.  Cable pulley system: Height 222.8cm, Depth 71cm.  GM3 spotters: Barbell rest area: 54.5cm, Overall length 64cm, Height 30cm, Width 6cm.  Weight storage addon: Height: 187cm, Depth: 52cm.  For additional details please refer to images. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Not suitable for commercial use.

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.