GM3 Quick Release Weight Storage Poles

GM2 Half Power Rack Squat Cage with Optional Cable Pulley System, Weight Storage and Spotters. Finished with a hard wearing hammertone gunmetal powder coat Fully adjustable half power rack - 36 Levels with upgraded westside spacing and laser cut numbering to help quick selection. Made from high grade 60mm x 60mm 2.0mm steel. Includes a pair of J-Cups which feature high-quality UHMW liners to absorb impact, reduce noise, and protect against barbell damage. Strong design - 350kg max load. Suits 6ft International, or 7ft bars. Pre-drilled with 11mm diameter holes (Floor fixings are not included and will vary depending on your floor type). The optional cable pulley system includes lat pull down bar and straight bar, perfect for lat pulldowns, seated rows, push downs, bicep curls and various other exercises. Note: You will need to interchange the top bar. Simply bolt the Cable pulley system onto the pre-existing holes.  Incorporate the Olympic bolt on storage system, made from 50x50 14 gauge steel, which boasts eight Olympic weight storage poles (the storage system is not compatible with standard 1" plates). Add x2 GM3 safety spotters to train heavy and solo with complete peace of mind, providing safety in the event of a failed lift. Approx. Dimensions: Half rack: Height 221cm (MAX), Width 124cm, Depth 149cm.  Cable pulley system: Height 222.8cm, Depth 71cm.  GM3 spotters: Barbell rest area: 54.5cm, Overall length 64cm, Height 30cm, Width 6cm.  Weight storage addon: Height: 187cm, Depth: 52cm.  For additional details please refer to images. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Not suitable for commercial use.

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

GYM MASTER GM3 Weight Lifting Power Rack Squat Cage and Dual Cable System Attachment with Height and Depth Options. The GM3 Power Rack and the Dual Cable system set is available in 2 heights (206/226cm) and also, 2 depths (60/90cm). It is finished with a hard wearing hammertone gunmetal powder coat The Power Rack is Fully Adjustable with Laser Cut numbering to help quick selection, as a result it suits 6 Ft International, or 7 foot bars. The power rack made from high quality 3.0mm 11 Gauge steel as a result has a 400kg max load. The holes are 16.5mm diameter to suit attachments with a Pin Diameter of 15.5mm. The Pulley System is made from high quality steel and it has a max load of 180kg. It has Olympic 2" diameter weight poles. Included: Pull Up Bar, 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells, Straight Bar handle and a wide Lat Pull Down Bar. Approximate Dimensions (See drawings for specifics): Max Heights: 206cm/226cm Max Depth: 153/178cm Max Width: 133cm Width between uprights: 110cm. Approx Foot Plate: 30cm high (UK Mens size 12.5), 35cm wide Loading space for olympic weights: 24cm per side Please Note: Not Suitable for Commercial Use. The GM3 Power Rack must be bolted down. Each foot has 3 x 11mm holes, however floor fixings are not included because the required fixings will vary depending on your floor type. Our fixing kit available separately is suitable for Masonry floors only. We strongly recommend consulting a builder to recommend fixings for your specific floor.   Our GM3 Power Rack and Cable Pulley System option is a superb high spec rack with a bolt on dual cable pulley system for a home or garage gym. With many optional affordable attachments and variable height options, this System will comfortably handle any home workout. The frame is made from 60x60mm 11 gauge steel, with laser cut height levels to make adjustments quick and easy.

GYM MASTER 2" Black Rubber Bumper Plates for Olympic Barbell Weight Lifting Sold in Pairs Solid rubber construction absorbs impact - Stainless steel centre ring Printed GYM MASTER logo and raised weight label Suitable for use on all 2" / 50mm Olympic diameter bars  45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 10cm. Please Note: The 150KG Full Set option includes 5 pairs of Bumper Plates. The 100KG Set option includes 4 pairs of Bumper Plates. Not Suitable for Commercial Use. 

GYM MASTER 2" Coloured Rubber Bumper Plates for Olympic Barbell Weight Lifting Sold in Pairs Solid rubber construction absorbs impact - Stainless steel centre ring Printed GYM MASTER logo and raised weight label Suitable for use on all 2" / 50mm Olympic diameter bars  45cm diameter (IWF standard) Approx plate thicknesses: 5kg: 2cm - 10kg: 4cm - 15kg: 6cm - 20kg: 8cm - 25kg: 9.1cm. Please Note: The 150KG Full Set option includes 5 pairs of Bumper Plates. The 100KG Set option includes 4 pairs of Bumper Plates. Not Suitable for Commercial Use. 

GYM MASTER Cast Iron 2" Olympic Tri-Grip Weight Plates. Available in pairs of 1.25kg, 2.5kg, 5kg, 10kg, 15kg, 20kg weight increments as well as a Full Set (107.5kg). Tri-grip design for easy pick up and loading. Suitable for strength training, cardio, and conditioning exercises. Different weight options for progressive weight training. Cast iron design. Suitable for use with 2" Olympic bars. Please note: bar not included. Not Suitable for Commercial Use.

GYM MASTER Rubber Coated 2" Olympic Tri-Grip Weight Plates Different weight options available to suit all strengths and weight lifting routines Tri-grip design allows effortless loading/unloading and enables versatile off-barbell exercises. Sold in Pairs. Rubber coated cast iron construction absorbs impact Stainless steel centre ring Suitable for use on all 2" / 50mm Olympic diameter bars Please note: Bar is not included. Not suitable for commercial use.