GM2 Battle Rope / Resistance Band Hoop Anchor Attachment for Power Rack Cage

GM2 Half Power Squat Rack Cage with Optional Weight Storage and Spotters Finished with a hard wearing hammertone gunmetal powder coat Fully Adjustable Power Rack - 36 Levels with Upgraded Westside Spacing and Laser Cut numbering to help quick selection. Made from High Grade 60x60 2.0mm steel, this Half Power Rack Includes a Pull Up Bar and 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Strong design - 350kg max load. Suits 6 Ft International, or 7 foot bars. Pre-drilled with 11mm diameter holes but floor fixings are not included because they will vary depending on your floor type. Optionally include the Olympic Bolt On Storage System Upgrade and/or 2 x GM3 Safety Spotters The Olympic Bolt On Storage System Upgrade is made from 50x50 14 gauge steel and boasts 4 Olympic Storage Poles on each side. Approximate Overall Dimensions: Cage Dimensions: Height: 221cm (MAX) Width at widest point: 124cm Depth: 149cm. GM3 Spotters: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Weight Storage Add On: Height: 187cm. Depth: 52cm. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Please Note: Not Suitable for Commercial Use. Our GM2 Half Power Rack is a superb rack for any home or garage gym. With many optional attachments such as Weight Storage and Spotters, this Half Cage will comfortably cater for most home workouts. The frame is made from 14 gauge reinforced steel with 36 adjustable levels, and the height levels are laser cut to make adjustments quick and easy. As standard, this cage includes heavy duty J-Cups with UHMW upgraded pads to protect your barbell.

GYM MASTER 38mm Battle Rope 9m/12m/15m. These add great variety and intensity to a full body strength and endurance workout. Exercises include double and alternating waves, shoulder circles, floor snakes and power slams. Each of these exercises help lose weight, gain muscle mass and tone existing muscles. Heat shrunk sealed ends provide a protective grip for your hands. Anti-fray, durable ends. Made from Duron rope for strength. Coils up for easy storage. 38mm thickness. Dimensions: 9m/12m/15m lengths available. Please Note: Not Suitable for Commercial Use.

GYM MASTER 100lb Resistance Band Set with Door Anchor 11-piece set includes 5 colour-coded bands, detachable handles, carabiner clips, ankle straps, door anchor and carry pouch. 5 colour-coded bands are expertly manufactured from natural latex to provide different levels of resistance to your training workout Includes: 10lb, 15lb, 20lb, 25lb and 30lb. Dimensions: band length 120cm/47.2 inches. Included: 5 x colour-coded bands, 2 x handles, 2 x ankle straps, 1 x door anchor and 1 x carry pouch. Please Note: Not Suitable for Commercial Use. This set of resistance bands are ideal for use on their own, together, or with other equipment. Introducing the GYM MASTER 100lb Resistance Band Set. This set includes 5 latex colour coded bands providing variable resistance for progressive strength training. Includes ankle straps, door anchor and carry bag.

GYM MASTER GM2 Olympic 2" Barbell Landmine Attachment Suitable for Olympic Barbells. Compatible with the GYM MASTER GM2 Power Rack with 60mm frame. Pivots and rotates over 180 degrees on horizontal and vertical axis to allow for varied workouts. Fits 2" Olympic bars. Strong Steel Construction with Powder Coated Gunmetal finish. Connection bolt included. Approximate Dimensions: Inner sleeve length: 25cm. Sleeve opening diameter: 5cm/2" for Olympic barbells. Max Load: 150kg. Bracket opening: 61.5mm to suit a 60mm frame. Please Note: Not Suitable for Commercial Use. The GYM MASTER GM2 Olympic 2" Barbell Landmine Attachment is designed to be used with Olympic barbells and is compatible with the GYM MASTER GM2 Half Power Rack. It can pivot and rotate over 180 degrees on both the horizontal and vertical axis, which allows for a variety of different workouts. This attachment is specifically designed to fit 2" Olympic bars and is made with strong steel construction and a powder-coated gunmetal finish for durability. A connection bolt is included.

GYM MASTER GM3 60mm Safety Spotter Arms with Protective UHMW Pad. Finished with a hard wearing hammertone gunmetal powder coat. Designed to fit the GYM MASTER GM2 and GM3 range with 60x60mm uprights and 16.5mm holes. Barbell Rest Area: 54.5cm. Robust and durable barbell rests Safety pin for added security and peace of mind. UHMW pads protect barbells from damage and reduces noise Approximate Dimensions: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Max Load: Up to 450kg Depending on Rack Please Note: Saftey Spotter Arms are Not Suitable for Commercial Use. Perfect for use with our GM2 and GM3 power racks, this pair of safety arms, protect you as well as your bar, thanks to their UHMW Pad. Ideal for home gyms without a spotter, these arms are a way to maintain a safe environment while working out. Made from heavy duty gunmetal hammertone powder coated steel with Protective UHMW pads, these GM3 Safety Spotters offer safety & support during your workout. Suitable for both the GM2 and GM3 range of Power Racks

GYM MASTER GM3 Single Leg Roller Support Rack Attachment for Split Squats Lunges etc This compact leg roller attachment is quick and easy to attach to our GM2 and GM3 Power Rack. Great for Bulgarian / Bodyweight split squats as well as other Glute/Ham work. Split Squats help isolate your Quads for direct targeting and efficient workouts. This adjustable height roller with it's luxurious padding allows you to achieve your best form and get the most from your workouts without any niggling discomfort When force is applied as you squat, the roller moves with you to lessen discomfort and increase your range of motion. This ergonomic design allows you to achieve better form and achieve more reps. Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. Overall Length: 56.5cm. Pad Diameter: 9cm. Pad Length: 50cm. Max Load: 200kg. Please Note: Not Suitable for Commercial Use. Quick and easy to set up, this GM3 Rack leg roller attachment can be set at a height of your preference. As a result, which makes split squats much more comfortable. Additionally, moving with you as force is applied which helps improve form. Great for split squats and other glute/ham work, this upgrade will help reduce discomfort and increase reps.

GYM MASTER Pair of GM3 Roller J-Cup Hooks with UHMW Protection Designed to fit the GM3 and GM2 range with 60x60mm racks and 16.5mm holes These Roller J-Cups enable you to easily center your barbell before unracking. Quick release adjustment knobs included. UHMW inserts on the back protect your rack while UHMW pads on the front protect your barbells from damage as well as reducing noise Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. Total height: 24cm. Total width: 6cm. Bar rest depth: 5cm. Max Load: 400kg (Depending on Rack capacity) Please Note: Not Suitable for Commercial Use. This pair of J-cup hooks are ideal for adding to your existing GM2 or GM3 power rack. They are easy to adjust and as well as protecting your bar. These GM3 Roller J-Cup hooks are designed to help you centre the bar before lifts and to unrack perfectly, making them a popular accessory. The UHMW liners on both sides protect both your rack and barbell from scrapes, and the quick release knobs provide extra peace of mind.

GYM MASTER Pair of GM3 Sandwich J-Cup Hooks with UHMW Protection Designed to fit the GM3 and GM2 range with 60x60mm racks and 16.5mm holes These can replace your standard J-Cups or act as an extra pair to reduce down-time between exercises UHMW inserts on the back protect your rack while a 25mm UHMW filling on the front cup protect your barbells from damage as well as reducing noise Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. Total height: 17cm. Total width: 6cm. Protrudes from rack face: 17cm. Max Load: 400kg (Depending on Rack capacity) Please Note: Not Suitable for Commercial Use. These sandwich hooks, compatible with our GM2 and GM3 power rack cages, are a perfect addition for various exercises These GM3 Sandwich J-Cup hooks are compatible with the GM2 and GM3 range. They are Incredibly strong - featuring a 25mm UHMW filling to protect your barbell, and also UHMW pads to protect your rack, making these are a very popular accessory.

GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM2 Power Rack These fit onto the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc Hard Wearing Gunmetal finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. Looking to level up your weightlifting game? The GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles are here to help. These poles are designed to fit onto the GM2 Power Rack, providing a convenient storage solution for your fractional change plates, QR collars, spring collars, and other workout essentials. Made with durable materials, these Olympic Fractional Weight Change Plate Storage Poles are built to last. With an easy-to-install design, you can quickly attach the poles onto your power rack and start organizing your gym space right away. Say goodbye to cluttered weightlifting areas and hello to a more efficient workout routine. The poles are compatible with Olympic fractional/change plates, making it easy to add small increments to your lifts. With its quick access design, you can easily grab the plates you need and focus on your form, rather than wasting time rummaging through piles of weights. In addition to the fractional plates, the GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles are also great for storing and accessing other essential gym items such as QR collars and spring collars. With everything organized and within reach, you can stay focused on your workout without any interruptions.

GYM MASTER GM2 Rack Vertical Barbell Holder Attachment Designed to fit the GM2 range with 60x60mm racks. Easy storage solution for a single 2" Olympic barbell to keep it safe, and at the same time, secure out of the way This attachment fits onto the uprights, additionally all fixings required are included Approx Dimensions: Sleeve Diameter: 5cm. Storage sleeve height: 19cm. Total Depth: 10.5cm Please Note: Not Suitable for Commercial Use. The GYM MASTER GM2 Rack Vertical Barbell Holder Attachment is the perfect solution for storing your Olympic barbell. Designed to fit the GM2 range with 60x60mm racks, this attachment provides secure and space-saving storage for your barbell. As a result, with this attachment, you can keep your barbell safe and secure out of the way, giving you more space in your gym or workout area. This attachment is easy to install and fits onto the uprights of the GM2 rack. All fixings required for installation are included, so you can have it up and ready to use in no time. The GYM MASTER GM2 Rack Vertical Barbell Holder Attachment is a durable and reliable option. Perfect for storing your Olympic barbell, making it a great addition to your home gym or commercial gym. The holder attachment is made from high-quality materials, ensuring it can withstand the weight and pressure of your Olympic barbell. The holder keeps the barbell upright and stable, preventing it from rolling around and getting damaged. Equally, with this attachment, you can easily access your barbell whenever you need it, without it taking up too much space.

GYM MASTER GM2 Pair of Dip Bars to fit the GM2 and GM3 60mm Power Racks Made From Gunmetal Powder Coated Steel This Attachment Adds Dip Bar / Station Functionality to the GM2 and GM3 Power Racks Specific Fitment For Cages With 60mm Frame Size and 16.5mm Hole Diameter. Pin size Approx 15.5mm. Maximum Capacity: 130kg Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. See Drawing for details. Height: 8.5cm. Width: 29.8cm. Depth: 33cm. Please Note: Not Suitable for Commercial Use. Pair of Dip Bars to fit our GM2 and GM3 60mm Power Racks Upgrade your workout routine with our GM2 Dip Bars. Made from high-quality steel, the attachment adds a dip station to the GM2/GM3 Power Rack Cages. This provides you with a complete upper-body workout solution. Designed specifically for cages with a 60mm frame size and 16.5mm hole diameter, the GM2 Dip Bars have a pin size of approximately 15.5mm. Specifically, a maximum capacity of 130kg, as a result of that dip bars can accommodate most users. The GM2 Dip Bars are easy to install and use, and their compact design makes them perfect for home gyms or small spaces. Therefore you can perform a wide range of exercises, including dips, knee raises, and leg raises, accordingly to strengthen your chest, triceps, and abs. Whether you're a beginner or a seasoned fitness enthusiast, the GM2 Dip Bars are an excellent addition to your workout routine. Additionally, they are durable, versatile, and designed to provide you with a safe and effective workout experience.