GM3 Heavy Duty Dip Bars - Pair

GM2 Half Power Squat Rack Cage with Optional Weight Storage and Spotters Finished with a hard wearing hammertone gunmetal powder coat Fully Adjustable Power Rack - 36 Levels with Upgraded Westside Spacing and Laser Cut numbering to help quick selection. Made from High Grade 60x60 2.0mm steel, this Half Power Rack Includes a Pull Up Bar and 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Strong design - 350kg max load. Suits 6 Ft International, or 7 foot bars. Pre-drilled with 11mm diameter holes but floor fixings are not included because they will vary depending on your floor type. Optionally include the Olympic Bolt On Storage System Upgrade and/or 2 x GM3 Safety Spotters The Olympic Bolt On Storage System Upgrade is made from 50x50 14 gauge steel and boasts 4 Olympic Storage Poles on each side. Approximate Overall Dimensions: Cage Dimensions: Height: 221cm (MAX) Width at widest point: 124cm Depth: 149cm. GM3 Spotters: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Weight Storage Add On: Height: 187cm. Depth: 52cm. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Please Note: Not Suitable for Commercial Use. Our GM2 Half Power Rack is a superb rack for any home or garage gym. With many optional attachments such as Weight Storage and Spotters, this Half Cage will comfortably cater for most home workouts. The frame is made from 14 gauge reinforced steel with 36 adjustable levels, and the height levels are laser cut to make adjustments quick and easy. As standard, this cage includes heavy duty J-Cups with UHMW upgraded pads to protect your barbell.

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

GYM MASTER GM3 60mm Safety Spotter Arms with Protective UHMW Pad. Finished with a hard wearing hammertone gunmetal powder coat. Designed to fit the GYM MASTER GM2 and GM3 range with 60x60mm uprights and 16.5mm holes. Barbell Rest Area: 54.5cm. Robust and durable barbell rests Safety pin for added security and peace of mind. UHMW pads protect barbells from damage and reduces noise Approximate Dimensions: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Max Load: Up to 450kg Depending on Rack Please Note: Saftey Spotter Arms are Not Suitable for Commercial Use. Perfect for use with our GM2 and GM3 power racks, this pair of safety arms, protect you as well as your bar, thanks to their UHMW Pad. Ideal for home gyms without a spotter, these arms are a way to maintain a safe environment while working out. Made from heavy duty gunmetal hammertone powder coated steel with Protective UHMW pads, these GM3 Safety Spotters offer safety & support during your workout. Suitable for both the GM2 and GM3 range of Power Racks

GYM MASTER GM3 Single Leg Roller Support Rack Attachment for Split Squats Lunges etc This compact leg roller attachment is quick and easy to attach to our GM2 and GM3 Power Rack. Great for Bulgarian / Bodyweight split squats as well as other Glute/Ham work. Split Squats help isolate your Quads for direct targeting and efficient workouts. This adjustable height roller with it's luxurious padding allows you to achieve your best form and get the most from your workouts without any niggling discomfort When force is applied as you squat, the roller moves with you to lessen discomfort and increase your range of motion. This ergonomic design allows you to achieve better form and achieve more reps. Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. Overall Length: 56.5cm. Pad Diameter: 9cm. Pad Length: 50cm. Max Load: 200kg. Please Note: Not Suitable for Commercial Use. Quick and easy to set up, this GM3 Rack leg roller attachment can be set at a height of your preference. As a result, which makes split squats much more comfortable. Additionally, moving with you as force is applied which helps improve form. Great for split squats and other glute/ham work, this upgrade will help reduce discomfort and increase reps.

GYM MASTER Pair of GM3 Roller J-Cup Hooks with UHMW Protection Designed to fit the GM3 and GM2 range with 60x60mm racks and 16.5mm holes These Roller J-Cups enable you to easily center your barbell before unracking. Quick release adjustment knobs included. UHMW inserts on the back protect your rack while UHMW pads on the front protect your barbells from damage as well as reducing noise Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. Total height: 24cm. Total width: 6cm. Bar rest depth: 5cm. Max Load: 400kg (Depending on Rack capacity) Please Note: Not Suitable for Commercial Use. This pair of J-cup hooks are ideal for adding to your existing GM2 or GM3 power rack. They are easy to adjust and as well as protecting your bar. These GM3 Roller J-Cup hooks are designed to help you centre the bar before lifts and to unrack perfectly, making them a popular accessory. The UHMW liners on both sides protect both your rack and barbell from scrapes, and the quick release knobs provide extra peace of mind.

GYM MASTER Pair of GM3 Sandwich J-Cup Hooks with UHMW Protection Designed to fit the GM3 and GM2 range with 60x60mm racks and 16.5mm holes These can replace your standard J-Cups or act as an extra pair to reduce down-time between exercises UHMW inserts on the back protect your rack while a 25mm UHMW filling on the front cup protect your barbells from damage as well as reducing noise Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. Total height: 17cm. Total width: 6cm. Protrudes from rack face: 17cm. Max Load: 400kg (Depending on Rack capacity) Please Note: Not Suitable for Commercial Use. These sandwich hooks, compatible with our GM2 and GM3 power rack cages, are a perfect addition for various exercises These GM3 Sandwich J-Cup hooks are compatible with the GM2 and GM3 range. They are Incredibly strong - featuring a 25mm UHMW filling to protect your barbell, and also UHMW pads to protect your rack, making these are a very popular accessory.

GYM MASTER GM2 Olympic 2" Barbell Landmine Attachment Suitable for Olympic Barbells. Compatible with the GYM MASTER GM2 Power Rack with 60mm frame. Pivots and rotates over 180 degrees on horizontal and vertical axis to allow for varied workouts. Fits 2" Olympic bars. Strong Steel Construction with Powder Coated Gunmetal finish. Connection bolt included. Approximate Dimensions: Inner sleeve length: 25cm. Sleeve opening diameter: 5cm/2" for Olympic barbells. Max Load: 150kg. Bracket opening: 61.5mm to suit a 60mm frame. Please Note: Not Suitable for Commercial Use. The GYM MASTER GM2 Olympic 2" Barbell Landmine Attachment is designed to be used with Olympic barbells and is compatible with the GYM MASTER GM2 Half Power Rack. It can pivot and rotate over 180 degrees on both the horizontal and vertical axis, which allows for a variety of different workouts. This attachment is specifically designed to fit 2" Olympic bars and is made with strong steel construction and a powder-coated gunmetal finish for durability. A connection bolt is included.

GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM2 Power Rack These fit onto the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc Hard Wearing Gunmetal finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. Looking to level up your weightlifting game? The GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles are here to help. These poles are designed to fit onto the GM2 Power Rack, providing a convenient storage solution for your fractional change plates, QR collars, spring collars, and other workout essentials. Made with durable materials, these Olympic Fractional Weight Change Plate Storage Poles are built to last. With an easy-to-install design, you can quickly attach the poles onto your power rack and start organizing your gym space right away. Say goodbye to cluttered weightlifting areas and hello to a more efficient workout routine. The poles are compatible with Olympic fractional/change plates, making it easy to add small increments to your lifts. With its quick access design, you can easily grab the plates you need and focus on your form, rather than wasting time rummaging through piles of weights. In addition to the fractional plates, the GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles are also great for storing and accessing other essential gym items such as QR collars and spring collars. With everything organized and within reach, you can stay focused on your workout without any interruptions.

GYM MASTER GM2 Rack Vertical Barbell Holder Attachment Designed to fit the GM2 range with 60x60mm racks. Easy storage solution for a single 2" Olympic barbell to keep it safe, and at the same time, secure out of the way This attachment fits onto the uprights, additionally all fixings required are included Approx Dimensions: Sleeve Diameter: 5cm. Storage sleeve height: 19cm. Total Depth: 10.5cm Please Note: Not Suitable for Commercial Use. The GYM MASTER GM2 Rack Vertical Barbell Holder Attachment is the perfect solution for storing your Olympic barbell. Designed to fit the GM2 range with 60x60mm racks, this attachment provides secure and space-saving storage for your barbell. As a result, with this attachment, you can keep your barbell safe and secure out of the way, giving you more space in your gym or workout area. This attachment is easy to install and fits onto the uprights of the GM2 rack. All fixings required for installation are included, so you can have it up and ready to use in no time. The GYM MASTER GM2 Rack Vertical Barbell Holder Attachment is a durable and reliable option. Perfect for storing your Olympic barbell, making it a great addition to your home gym or commercial gym. The holder attachment is made from high-quality materials, ensuring it can withstand the weight and pressure of your Olympic barbell. The holder keeps the barbell upright and stable, preventing it from rolling around and getting damaged. Equally, with this attachment, you can easily access your barbell whenever you need it, without it taking up too much space.

GYM MASTER GM2 Pair of Dip Bars to fit the GM2 and GM3 60mm Power Racks Made From Gunmetal Powder Coated Steel This Attachment Adds Dip Bar / Station Functionality to the GM2 and GM3 Power Racks Specific Fitment For Cages With 60mm Frame Size and 16.5mm Hole Diameter. Pin size Approx 15.5mm. Maximum Capacity: 130kg Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. See Drawing for details. Height: 8.5cm. Width: 29.8cm. Depth: 33cm. Please Note: Not Suitable for Commercial Use. Pair of Dip Bars to fit our GM2 and GM3 60mm Power Racks Upgrade your workout routine with our GM2 Dip Bars. Made from high-quality steel, the attachment adds a dip station to the GM2/GM3 Power Rack Cages. This provides you with a complete upper-body workout solution. Designed specifically for cages with a 60mm frame size and 16.5mm hole diameter, the GM2 Dip Bars have a pin size of approximately 15.5mm. Specifically, a maximum capacity of 130kg, as a result of that dip bars can accommodate most users. The GM2 Dip Bars are easy to install and use, and their compact design makes them perfect for home gyms or small spaces. Therefore you can perform a wide range of exercises, including dips, knee raises, and leg raises, accordingly to strengthen your chest, triceps, and abs. Whether you're a beginner or a seasoned fitness enthusiast, the GM2 Dip Bars are an excellent addition to your workout routine. Additionally, they are durable, versatile, and designed to provide you with a safe and effective workout experience.

GYM MASTER Pair of Black Olympic Rubber Bumper Plates Sold in Pairs. Solid rubber construction absorbs impact. Stainless steel centre ring. Printed GYM MASTER logo and raised weight label. Suitable for use on all 2" / 50mm Olympic diameter bars. 45cm diameter (IWF standard). Approximate plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm Please Note: The Full Set option includes 5 pairs of Bumper Plates, totalling 150kg. Not Suitable for Commercial Use.

GYM MASTER Pair of Coloured Olympic Rubber Bumper Plates Sold in Pairs. Solid rubber construction absorbs impact. Stainless steel centre ring. Printed GYM MASTER logo and raised weight label. Suitable for use on all 2" / 50mm Olympic diameter bars. 45cm diameter (IWF standard). Approximate plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm Please Note: The Full Set option includes 5 pairs of Bumper Plates, totalling 150kg. Not Suitable for Commercial Use.

GYM MASTER Pair of Competition Olympic Rubber Bumper Plates Sold in Pairs Solid rubber construction absorbs impact - with Chrome Plated steel disc insert Printed GYM MASTER logo and weight label. Manufactured within a tolerance of just +/- 10g which meets IWF standards Suitable for use on all 2" / 50mm Olympic diameter bars The Full Set includes 4 Pairs of Bumper Plates, totalling 140kg. 45cm diameter (IWF standard). Approx plate thicknesses: 10kg: 3.5cm. 15kg: 4.5cm. 20kg: 5.5cm. 25kg: 6.5cm. Please Note: Not Suitable for Commercial Use. These Colour Coded Olympic Competition Bumper Plates are all 45cm Diameter (IWF Standard) and are ideal for Quick Selection During Olympic weightlifting and deadlift exercise. They are shock-absorbing and help protect your training bars and floor because they are made of rubber.

GYM MASTER Pair of Chrome Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress Made from Hard Wearing Chrome Plated Steel. Sold in Pairs. Calibrated to +/ - 10G. Laser Engraved GYM MASTER logo and weight label Suitable for use on all 2" / 50mm Olympic diameter bars Dimensions: 0.25kg: 10.5cm ⌀ x 0.5cm. 0.5kg: 10.5cm ⌀ x 1cm. 0.75kg: 10.5cm ⌀ x 1.5cm. 1kg: 10.5cm ⌀ x 2cm Please Note: Not Suitable for Commercial Use. Are you looking to take your weightlifting to the next level? Look no further than these Fractional Change Plates. Designed for micro loading exercises and lifts, these plates are perfect for anyone struggling to progress in their lifts. With their ability to increase your one-rep maximum, these plates are excellent for developing your body muscle, balance, and coordination. One of the standout features of these plates is their chrome plating. Not only does this give them a sleek and polished look, but it also provides them with durability and strength. Unlike standard cast plates, these plates are more robust and built to last. Another great thing about these plates is their versatility. They fit 2" Olympic weight bars, which means they can be used in a variety of exercises and lifts. Whether you're doing squats, deadlifts, or any other Olympic-style lift, these plates will help you take your workout to the next level. With a range of weights available, from 0.25 kg to 1 kg, you can easily find the perfect set to suit your needs. And for those who are always on the go, there's even an option to get a set that includes a travel bag, making it easy to take your plates with you wherever you go. But these plates aren't just for seasoned weightlifters. They're also great for beginners who are just starting out on their fitness journey. By using these plates, you can gradually increase the weight you lift, building up your strength and endurance over time. So if you're looking to take your weightlifting to the next level, consider investing in a set of Fractional Change Plates. With their durability, versatility, and ability to help you progress in your lifts, they're a must-have for any serious weightlifter.

GYM MASTER Pair of Rubber Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress. Made from solid rubber. Sold in Pairs of Fractional plates. Calibrated to +/- 10g. Suitable for use on all 2"/50mm Olympic diameter bars. Approximate Dimensions: 0.5kg: 13.5cm ⌀ x 1.1cm. 1kg: 16cm ⌀ x 1.5cm. 1.5kg: 17cm ⌀ x 1.9cm. 2kg: 19cm ⌀ x 1.85cm. 2.5kg: 23cm ⌀ x 2.5cm Please Note: Not Suitable for Commercial Use. Use these Fractional Change Plates to increase your one-rep maximum - perfect for Micro Loading exercises and lifts where you are struggling to progress. Excellent for developing body muscle, balance and co-ordination. These rubber plates fit 2" Olympic weight bars. The plates range in weight from 0.5 kg to 2.5 kg, or you can buy a full set

GYM MASTER Cast Iron 2" Olympic Tri-Grip Weight Plates. Available in pairs of 1.25kg, 2.5kg, 5kg, 10kg, 15kg, 20kg weight increments as well as a Full Set (107.5kg). Tri-grip design for easy pick up and loading. Suitable for strength training, cardio, and conditioning exercises. Different weight options for progressive weight training. Cast iron design. Suitable for use with 2" Olympic bars. Please note: bar not included. Not Suitable for Commercial Use.

GYM MASTER Half Power Rack Cage. Heavy duty reinforced steel tube frame. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Pull up bar with wide and neutral grip design. Includes 2 adjustable dip bar accessories. Gunmetal coated finish. 50mm x 50mm steel frame tubes. 20 increment settings at the front and 26 at the rear. Large 200kg barbell max load. 200kg pull up max load. Please Note: Suits 6Ft International, or 7 foot bars. Assembled dimensions: Height: 210cm - Width: 119cm - Depth: 136cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER Power Rack Cage. Solid heavy duty steel. Solid steel pull up bar with heavy duty textured grip. 50mm x 50mm steel frame tubes. Fully adjustable with 21 different settings. Gunmetal coated finish. Includes 2 full length safety bars in chrome as well as 2 chrome barbell rests. Compatible with the GYM MASTER 6ft and 7 ft standard and Olympic barbells. Secure protective rubber feet. Compatible with a range of attachments. 260kg max barbell load. 210kg max pull up load. Please Note: Suits 6 Ft International, or 7 foot bars. Assembled dimensions: Height: 209cm - Width: 110cm - Depth: 112.5cm. Please Note: Not Suitable for Commercial Use. Heavy duty steel power rack cage, with textured grip and adjustable settings.

GYM MASTER Adjustable Squat Rack Cage. Heavy duty reinforced steel frame. Fits both standard and Olympic bars. Heavy duty solid steel knurled pull up bar. Gunmetal coated finish. 28 height increments to choose from with a minimum height of 45cm and a maximum height of 197.5cm. We Strongly Recommend Bolting This Rack to the Ground. Anchor Points on Each Corner for Securing to the Floor for Maximum Security - Ground Anchoring Bolts Are Supplied. 50x50mm Heavy Duty Reinforced Steel Tube Frame. 28 Holes with 17mm Diameter. Hole spacing: 5cm. Heavy Duty Solid Steel Knurled Pull Up Bar. J-Cup and Spotter Max Load: 200kg. Pull Up Bar Max Load: 120kg Please Note: Suits 6 Ft International, or 7 foot bars. Assembled dimensions: Height: 220.5cm - Width: 119.5cm - Depth: 123cm. Please Note: Not Suitable for Commercial Use. Introducing the GYM MASTER fully adjustable Squat Rack Cage and Pull up Station. Ideal for those who love to do squats, bench presses and pull ups, it offers a wide range of exercises with a solid and sturdy construction. Suitable for standard and Olympic barbells. Choose from 28 height settings, complete with additional J hooks, and weight plate storage.

GYM MASTER Pair of 2" Olympic Barbell Quick Release Collars. Universal Fit for All Olympic Size Bars - A Great Upgrade for Basic Collars on Curl Bars, Tricep Bars, Dumbbell Bars, Barbell Bars etc. Simple 'One Click' Lock Design for Easy and Quick Removal and Stronger Than Standard Spring Collars. Made From Solid Nylon Resin and Interior Rubber Grips to Prevent Weights from Slipping During Use. Dimensions - Internal Diameter: 2" / 50mm - Overall Height: 8.5cm, Overall Width: 9cm. Please Note: Not Suitable for Commercial Use. Introducing the GYM MASTER Quick Release Olympic Barbell Collars. The most efficient way of securing your weights to your GYM MASTER Olympic barbell without losing time between sets. The hard-wearing “one click” snap lock design with rubber inserts help secure your weights and protect your barbell from scratches and marks.

Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip on the bar 2" Clip Collars to Keep Weights Secure whilst on the Olympic barbell. Good Olympic Quality, Long-Lasting Product. Load Capacity: 300kg. Olympic Barbell Weights: 4ft = 7.4kg. 5ft = 11.3kg. 6ft = 14kg. 6ft International = 14kg. 7ft = 17kg. Specifications: Middle Barbell Diameter: 2.5cm. 2" Sleeve Diameter: 5cm. 4ft = 120cm, 17cm Sleeves 5ft =152cm, 27cm sleeves 6ft =183cm, 32cm sleeves 6ft International =186cm, 25cm sleeves 7ft =219cm, 40cm sleeves   Please note: No Olympic Weight Plates Included. Measurements May Differ Slightly. Not Suitable for Commercial Use. Your order will be posted together (2" Olympic barbell and spring clip collars), however couriers may deliver the items separately.   2 inch olympic barbell made from heavy duty chrome steel, with quick release spring clip collars and knurled hand grips. Ideal for home gyms, and suitable for a range of exercises, including Olympic lifting, the rotating sleeve allows weight plates to be changed quickly, and easily, due to its spring clip collars while keeping the plates securely in place, whilst using the barbell. Due to the anti-slip hand grips of the barbell, no matter how hard you push yourself, that you ensure your grip remains. The clips also ensure Also, it fits all standard 2 inch Olympic weight plates (not included) This free weight set up will help you to achieve all your fitness goals!

GYM MASTER Olympic Multi Grip Football | Swiss Bar in Gunmetal Three handle positions including one angled and two neutral. Approximate distances between grips: 24cm (narrow), 50cm (mid) and 72cm (wide). Swiss bar design relieves pressure and alleviates strain on shoulders and wrists 32mm handle diameter with knurled grips. Matt black powder-coated steel construction Please Note: QR collars are not included. Approximate Dimensions: Overall Width: 210.6cm. Sleeve Length: 35cm. Sleeve diameter: 2". Bar weight approx: 20kg. Maximum load: 350kg Please Note: Not Suitable for Commercial Use. This Olympic Swiss Bar is ideal for helping you to train with precision and quickly switching up grip positions. Perfect for targeting specific muscles while adding variety to your workout.