GM3 Power Rack With Bench, Barbell and Weights Set

GYM MASTER GM3 Dual Cable System Attachment for the GM3 Power Rack. Our GM3 Cable Pulley System is a great bolt-on system for GYM MASTER GM3 Power Rack. Available to suit the 206cm and 226cm height variants, adding even greater functionality. Exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls. Easily add this Cable Pulley System to the GM3 Power Rack using pre-drilled holes in the frame and use your existing olympic plates as weights.  Finished with a hard wearing hammertone gunmetal powder coat to match the cage. 180kg Max Load cable pulley system. Made from high quality steel.  It has Olympic 2" diameter weight poles. This kit includes a straight bar handle and a wide lat pull down bar. IMPORTANT: You must only choose the Missing Stabiliser option if you already purchased the curved stabiliser bar separately.  Please Note: Not Suitable for Commercial Use.  Our GM3 Cable Pulley System is a great bolt-on system for GYM MASTER GM3 Power Rack 206cm and 226cm height variants. This kit includes a straight bar handle and a wide lat pull down bar - adding even more functionality. Able to hold up to 180kg of Olympic weight plates with 90kg per side, exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls. Note: Fits only the GYM MASTER GM3 Power Rack; not available for the 186cm variant or other models.

GYM MASTER GM3 Lap Bar Leg Pad Knee Cushion Power Rack Attachment for Lat Pulldown Exercises on 60x60mm Cages With Gunmetal Powder Coated Finish. There is nothing worse than being lifted out of your seat during pull downs, so this simple attachment is here to help. Designed to compliment the GYM MASTER Dual Cable System Attachment for the GM3 Power Rack, you simply slide it onto your uprights and secure the locking pins at a height comfortable for you. With an extra wide padded cushion, this attachment can keep you firmly in place and enable you to achieve new PB's and that critical full stretch when performing pulling movements with the upper pulley. Compatible with GM3 60x60mm Racks with 16.5mm holes and 1160mm between them (see dims image). Approx Dimensions: Pin Diameter: 15.5mm. Cushion Width: 50cm. Cushion Diameter: 9cm. Overall Width: 122cm. Please Note: Not Suitable for Commercial Use.  The GYM MASTER GM3 Lap Bar Leg Pad Knee Cushion Power rack attachment is the perfect accessory to complement your home gym setup. This attachment is designed to help you perform lat pulldown exercises without being lifted out of your seat. With its adjustable and flexible design, you can easily slide it onto your uprights and secure the locking pins at a height that is comfortable for you. Made from high-quality materials, this lap bar leg pad knee cushion is durable and built to last. It is specifically designed to be used with the GYM MASTER Dual Cable System Attachment for the GM3 Power Rack. Which makes it the perfect addition to your home gym for those who are serious about their fitness goals.

GYM MASTER GM3 Hip Thrust Pad Bench Attachment for use with the GM3 60x60mm Power Rack. Designed to help you perform a range of exercises in comfort at a custom height suitable for you. Gunmetal Powder Coated Finish It's multi functional design also allows for glute ham raises and single-leg squats, making this a real 'must have' attachment. Made from high-quality materials, this hip thrust bench attachment is durable and built to last. Compatible with the GYM MASTER GM3 Power Rack. Approx Dimensions: Pin Diameter: 15.5mm. Cushion Width: 90cm. Cushion Depth: 16cm. Cushion Height: 10.5cm. Overall Width: 122cm. Min height to the top of Cushion when mounted to the GM3 Power Rack: 34cm. Min height if mounted on our GM2 Half Power Rack: 49cm. Please Note: Not Suitable for Commercial Use.   The GM3 Hip Thrust Power Rack Attachment is a padded crossmember designed specifically for use on the GYM MASTER GM3 power rack.  It is designed to help you perform hip thrust exercises easily and in comfort on it's padded bench at a custom height to suit you. It's multi functional design also allows for glute ham raises and single-leg squats, making this a real 'must have' attachment. Made from high-quality materials, this hip thrust bench attachment is durable and built to last. With its adjustable and flexible design, you can easily slide it onto your 60x60mm uprights and secure the locking pins at a height suitable for a wide range of exercises.

GYM MASTER GM3 60mm Safety Spotter Arms with Protective UHMW Pad. Finished with a hard wearing hammertone gunmetal powder coat. Designed to fit the GYM MASTER GM2 and GM3 range with 60x60mm uprights and 16.5mm holes. Barbell Rest Area: 54.5cm. Robust and durable barbell rests Safety pin for added security and peace of mind. UHMW pads protect barbells from damage and reduces noise Approximate Dimensions: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Max Load: Up to 450kg Depending on Rack Please Note: Saftey Spotter Arms are Not Suitable for Commercial Use. Perfect for use with our GM2 and GM3 power racks, this pair of safety arms, protect you as well as your bar, thanks to their UHMW Pad. Ideal for home gyms without a spotter, these arms are a way to maintain a safe environment while working out. Made from heavy duty gunmetal hammertone powder coated steel with Protective UHMW pads, these GM3 Safety Spotters offer safety & support during your workout. Suitable for both the GM2 and GM3 range of Power Racks

GYM MASTER GM3 Battle Rope/Resistance Band Hoop Anchor Attachment for Power Rack Cage With Gunmetal Powder Coated Finish This Hoop Anchor is easy to attach to our GM3 Power Rack Easily bolted to the uprights or horizontal cross-members in low or high positions. This D hoop anchor is an excellent attachment for adding battle rope or resistance band exercises to your routine. Mounting bolts are included. Approximate Dimensions If Mounted Vertically: Depth to the end of the hoop: 12.5cm. Hoop: ⌀26mm*2.0 approx. Height if vertical: 25cm. Width: 5cm. Mounting plate thickness: 8mm. Please Note: Hoop Anchor Attachment is Not Suitable for Commercial Use. Designed to work with our GM3 power rack, this anchor allows you to attach a battle rope or resistance band to it, as a result you can add another dimension to you work outs with ease. This GM3 Hoop attachment is suited to our GM3 power rack. Whether you use it for battle ropes or resistance bands, and with high or low mounting, this flexible little attachment packs a punch and opens up a long list of new potential exercises.

GYM MASTER GM3 Multi Grip Pull Up Bar Upgrade Attachment for the GM3 Power Rack Two pairs of straight handles and one pair of angled handles. Great for a range of wide and narrow grip exercises Gunmetal Powder Coated Finish  Handle Diameter 32mm with light burring for improved grip. Includes all required fixings. Can be installed Downwards, although Installing Upwards does not add any height to the overall Rack Measurements: Width: 110cm. Height: 13.1cm. Depth: 30cm When fitted to the GM3 power rack: 226cm version 222.5cm to the top of the pull up bar. 204.5 cm to the bottom of the pull up bar if installed downwards 206cm version 202.5 cm to the top of the pull up bar. 184.5cm to the bottom of the pull up bar if installed downwards. 186cm version 182.5 cm to the top of the pull up bar. 164.5 cm to the bottom of the pull up bar if installed downwards Please Note: Not Suitable for Commercial Use.   This Multi Grip Pull Up Bar Upgrade Attachment is designed specifically for the GYM MASTER GM3 Power Rack. It is a versatile attachment that allows for a variety of pull-up exercises by offering wide, neutral, and narrow grip positions. This enables users to target specific muscles more effectively during their workouts. The pull-up bar features a gunmetal powder coated finish, which not only enhances its visual appeal but also adds durability and resistance to wear and tear. The handles have a diameter of 32mm and a light burring that helps improve grip, ensuring a secure and comfortable hold during workouts. This attachment is also able to be installed upside down, saving critical centimeters in your home gym

GYM MASTER GM3 Olympic 2" Barbell Landmine Power Rack Attachment with Horizontal & Vertical Pivot Suitable for Olympic Barbells. Compatible with the GYM MASTER GM3 Power Rack with 60mm frame. Pivots and rotates over 180 degrees on horizontal and vertical axis to allow for varied workouts. Fits 2" Olympic bars. Strong Steel Construction with Powder Coated Gunmetal finish. Connection bolt included. Approximate Dimensions: Inner sleeve length: 25cm. Sleeve opening diameter: 5cm/2" for Olympic barbells. Max Load: 300kg. Bracket opening: 61.5mm to suit a 60mm frame. Please Note: Not Suitable for Commercial Use. The GYM MASTER GM3 Olympic 2" Barbell Landmine Power Rack Attachment is designed to be used with Olympic barbells and is compatible with the GYM MASTER GM3 Power Rack. It can pivot and rotate over 180 degrees on both the horizontal and vertical axis, which allows for a variety of different workouts. This attachment is specifically designed to fit 2" Olympic bars and is made with strong steel construction and a powder-coated gunmetal finish for durability. A connection bolt is included.

GYM MASTER 16mm Weightlifting Resistance Band Pegs for GM3 Power Cage Rack Compatible with the GM3 Power Rack, these pegs are excellent for adding accommodating resistance Quick and Easy to add and remove - simply slide them through the cage and use for many different exercises and progressive resistance Quick and Easy to add and remove - simply slide them through the cage and use for many different exercises and progressive resistance Approximate Measurements: Diameter: 16mm, Peg Length: 20cm. Please Note: Not Suitable for Commercial Use. Band pegs should only be used if the rack is bolted to the floor 

GYM MASTER GM3 Masonry Bolt Fixing Kit - Set of 12 Zinc plated finish with 13mm hexagon head and integrated washers. These M10 x 80mm bolts are fast and secure to install The undercutting action provides a positive anchorage with no expansion forces like those created by traditional expansion bolts. This causes less damage to the target surface and can also allow these to be used closer to the edge. Suited to the GM3 range, depending on your flooring. Always seek expert advice from a professional such as a builder when deciding what fixings to use when securing your kit to the ground or wall Spanner Size Required:13mm. Bolt Length: 80mm, Thread Size: 10mm, Drill Diameter Required: 8mm. Please Note: Not Suitable for Commercial Use.

GYM MASTER GM3 Pair of Heavy Duty Dip Bars to fit the GM2 / GM3 60mm Power Racks With Gunmetal Powder Coated Finish Steel This Attachment Adds Dip Bar / Station Functionality to the GM2 and GM3 Power Rack Cages Specific Fitment For Cages With 60mm Frame Size and 16.5mm Hole Diameter. Pin size Approx 15.5mm. Maximum Capacity: 160kg Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. Handle grip diameter: 33mm. See Drawing for details. Height: 12cm. Width: 39cm. Depth: 29.5cm. Bar Angle: 75°.  Please Note: Not Suitable for Commercial Use. Looking to enhance your workout routine? The GYM MASTER GM3 Heavy Duty Dip Bars - Pair is a perfect addition to your home gym setup. Made from gunmetal powder-coated steel, these dip bars are durable and built to last. The attachment adds dip station functionality to the GM2 and GM3 Power Rack Cages, giving you more exercise options for a full-body workout. With a specific fitment for cages with 60mm frame size and 16.5mm hole diameter, these dip bars are designed to provide a secure and stable base. The pin size is approximately 15.5mm. These heavy-duty dip bars have a maximum capacity of 160kg, making them suitable for most users. The dip bars' adjustable height allows for different users' heights and exercise preferences. With these dip bars, you can work on your triceps, chest, and shoulder muscles. They are also great for building upper body strength and improving overall fitness levels.

GYM MASTER GM3 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM3 Power Rack These fit onto the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc With Gunmetal Powder Coated Finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. The GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles designed to fit onto the GM2 Power Rack, providing a convenient storage solution for your fractional change plates, QR collars, spring collars, and other workout essentials. With an easy-to-install design, you can quickly attach the poles onto your power rack and start organizing your gym space right away. Say goodbye to cluttered weightlifting areas, but hello to a more efficient workout routine. The poles are compatible with Olympic fractional/change plates, making it easy to add small increments to your lifts. With its quick access design, you can easily grab the plates you need and focus on your form, rather than wasting time rummaging through piles of weights. In addition to the fractional plates, the GYM MASTER GM3 Pair of Olympic Fractional Weight Change Plate Storage Poles are also great for storing and accessing other essential gym items such as QR collars and spring collars. With everything organized and within reach, you can stay focused on your workout without any interruptions.

GYM MASTER Pair of GM3 2" Olympic Weight Plate Holder Storage Pole Power Rack Attachments With Gunmetal Powder Coated Finish. The perfect alternative for more space-consuming storage, and these can be set at the most comfortable height and location for you. Especially well suited for home and garage gyms with limited space. Exceptionally Strong - this storage pole can support as many weight plates as you can fit on it. Simply fit to your GM3 power rack permanently with the bolts included. Please Note: We strongly advise securing all weight plates with a Spring Clip or QR Collar. Approximate Dimensions: Height: 13cm. Width: 6.1cm. Length: 39.5cm Steel sheet thickness: 4mm. Steel hook diameter: 8mm Please Note: Not Suitable for Commercial Use. These Olympic Weight Plate Storage Horns are suitable for our GM3 Power Rack. They are very popular due to their flexibility and ability to store your plates at any height that suits you for easy access and storage.

GYM MASTER GM3 Rack Bar Holder Attachment. With Gunmetal Powder Coated Finish. Choose from either Horizontal or Vertical mount options. Designed to fit the GM3 range with 60x60mm racks. These provide storage for a single 2" Olympic barbell to keep it safe and secure out of the way. Fixings required are included. The Vertical holder fits onto the uprights and the Horizontal holder fits to the cross-members. Approximate Dimensions: Sleeve Diameter: 5cm. Storage sleeve height: 19cm. Total Depth: 10.5cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER GM3 60x60mm Power Rack Mounted Barbell Storage Hook Anchor Holder By top mounting this barbell anchor to your power rack you can store your most used barbells in your rack but out of the way. Designed to maximise storage space and minimise the hassle of moving barbells in and out of your power rack, this add-on is sold as a pair. Compatible with many 60x60mm Power racks Stores up to 2 barbells *the size and shape of a barbell and may limit the holder to 1. Made from 5mm thick Steel. Chrome plated finish. Protective black 6mm UHMW barbell liner. Max Load: 60kg. Approximate Dimensions: Height: 23.5cm. Width: 22cm. Depth :3.5cm.  Do not store bars with any weights still attached. Take care when storing or retrieving barbells from the barbell anchor. We do not recommend exercising in the Power Rack whilst any bars are in storage. We recommend only using The Barbell Anchor on well secured racks that are bolted to the ground. Please Note: Not Suitable for Commercial Use.

Your browser does not support our video. GYM MASTER GM3 Power Rack Extension Kit - Choice of Height & Depth This is an extension kit only which includes two uprights and four cross members. This extension kit allows you to add more storage, utility and stability to your existing GM3 power rack Available in 186cm 206cm and 226cm height variants to match the GM3 Power Rack as well as 60cm and 90cm depth variants. Finished with a hard wearing hammertone gunmetal powder coat The extension is made from the same 11 gauge 3mm steel frame and comes with the same laser cut number intervals, the same holes and all the necessary nuts and bolts. Dimensions: 60cm Depth Option: This extension adds 60cm internal depth and approximately 66cm overall depth to your existing power rack. 90cm Depth Option: This extension adds 90cm internal depth and approximately 96cm overall depth to your existing power rack. Please Note: Not Suitable for Commercial Use. Our GM3 Power Rack extension kits allow you to increase the depth of your existing rack. This adds more stability and when paired with other attachments you can also increase your storage and utility. The frame is made from the same 60x60mm 11 gauge steel, with laser cut height levels to make adjustments quick and easy.

GYM MASTER GM3 Masonry Bolt Fixing Kit - Set of 12 Zinc plated finish with 13mm hexagon head and integrated washers. These M10 x 80mm bolts are fast and secure to install The undercutting action provides a positive anchorage with no expansion forces like those created by traditional expansion bolts. This causes less damage to the target surface and can also allow these to be used closer to the edge. Suited to the GM3 range, depending on your flooring. Always seek expert advice from a professional such as a builder when deciding what fixings to use when securing your kit to the ground or wall Spanner Size Required:13mm. Bolt Length: 80mm, Thread Size: 10mm, Drill Diameter Required: 8mm. Please Note: Not Suitable for Commercial Use.