Single Barbell Deadlift Loading Jack with UHMW Padding

GYM MASTER Full Double Barbell Deadlift Loading Jack with HDPE Padding Suitable for 45cm diameter weights. Our double deadlift jack allows a quick, easy and safe solution to loading and unloading the barbell Effortlessly lift both sides of the barbell at the same time to save time, strength and focus for the heavy lifting, and avoid tweaking your back Built from heavy duty steel covered with gunmetal powder coating and HDPE padding to protect your bars. Approximate Dimensions: Total Width - 106.5cm. Depth - 42.5cm. Height - 91cm. Max Load: 360kg Please Note: Suitable for 6 and 7ft bars. Check your bar dimensions. You must NOT entirely unload one side of a heavy barbell while leaving the other loaded. Max load is dependent on correct combined usage of handle bar and foot plate. Not Suitable for Commercial Use.

Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip on the bar 2" Clip Collars to Keep Weights Secure whilst on the Olympic barbell. Good Olympic Quality, Long-Lasting Product. Load Capacity: 300kg. Olympic Barbell Weights: 4ft = 7.4kg. 5ft = 11.3kg. 6ft = 14kg. 6ft International = 14kg. 7ft = 17kg. Specifications: Middle Barbell Diameter: 2.5cm. 2" Sleeve Diameter: 5cm. 4ft = 120cm, 17cm Sleeves 5ft =152cm, 27cm sleeves 6ft =183cm, 32cm sleeves 6ft International =186cm, 25cm sleeves 7ft =219cm, 40cm sleeves   Please note: No Olympic Weight Plates Included. Measurements May Differ Slightly. Not Suitable for Commercial Use. Your order will be posted together (2" Olympic barbell and spring clip collars), however couriers may deliver the items separately.   2 inch olympic barbell made from heavy duty chrome steel, with quick release spring clip collars and knurled hand grips. Ideal for home gyms, and suitable for a range of exercises, including Olympic lifting, the rotating sleeve allows weight plates to be changed quickly, and easily, due to its spring clip collars while keeping the plates securely in place, whilst using the barbell. Due to the anti-slip hand grips of the barbell, no matter how hard you push yourself, that you ensure your grip remains. The clips also ensure Also, it fits all standard 2 inch Olympic weight plates (not included) This free weight set up will help you to achieve all your fitness goals!

GYM MASTER Pair of Black Olympic Rubber Bumper Plates Sold in Pairs. Solid rubber construction absorbs impact. Stainless steel centre ring. Printed GYM MASTER logo and raised weight label. Suitable for use on all 2" / 50mm Olympic diameter bars. 45cm diameter (IWF standard). Approximate plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm Please Note: The Full Set option includes 5 pairs of Bumper Plates, totalling 150kg. Not Suitable for Commercial Use.

GYM MASTER Pair of Coloured Olympic Rubber Bumper Plates Sold in Pairs. Solid rubber construction absorbs impact. Stainless steel centre ring. Printed GYM MASTER logo and raised weight label. Suitable for use on all 2" / 50mm Olympic diameter bars. 45cm diameter (IWF standard). Approximate plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm Please Note: The Full Set option includes 5 pairs of Bumper Plates, totalling 150kg. Not Suitable for Commercial Use.

GYM MASTER Pair of Competition Olympic Rubber Bumper Plates Sold in Pairs Solid rubber construction absorbs impact - with Chrome Plated steel disc insert Printed GYM MASTER logo and weight label. Manufactured within a tolerance of just +/- 10g which meets IWF standards Suitable for use on all 2" / 50mm Olympic diameter bars The Full Set includes 4 Pairs of Bumper Plates, totalling 140kg. 45cm diameter (IWF standard). Approx plate thicknesses: 10kg: 3.5cm. 15kg: 4.5cm. 20kg: 5.5cm. 25kg: 6.5cm. Please Note: Not Suitable for Commercial Use. These Colour Coded Olympic Competition Bumper Plates are all 45cm Diameter (IWF Standard) and are ideal for Quick Selection During Olympic weightlifting and deadlift exercise. They are shock-absorbing and help protect your training bars and floor because they are made of rubber.

GYM MASTER Olympic Bumper Plate Storage Stacker Trolley A brilliant storage solution for keeping your gym floor tidy whilst minimising non-workout related lifting! With a small footprint, this multi-directional trolley is simple but effective and a great addition to any busy gym space. Made from powder coated heavy duty steel and with 4 multi-directional heavy duty locking castor wheels for maximum safety and usability. Approximate Dimensions: Total height: 108.5cm. Total width of base: 60cm. Total width inc stoppers: 76cm. Weight sleeve: 93.5cm. Bar diameter: 48mm. Product weight (approx.): 11kg. Please Note: Not Suitable for Commercial Use.

GYM MASTER 5 Bar Olympic Barbell Vertical Floor Stand Storage Rack Ideal floor storage, accommodates up to five Olympic weight bars so you can keep your bars secure and close to hand. Perfect rack for keeping your gym clean, while also allowing you to complete your workouts swiftly and comfortably. Made from heavy duty 5mm 6 gauge steel. Finished with gunmetal hammer tone powder-coat Approx Dimensions: Height: 21.5cm. Width: 31cm. Depth: 31cm. Product weight: 13.5kg. Please Note: Not Suitable for Commercial Use. Ideal home gym storage rack for your olympic barbells Our Olympic Weight Bar Floor Storage Stand can accommodate up to five Olympic weight bars, so you can keep your bars secure and close to hand. Made from heavy duty 5mm 6 gauge steel. Perfect for keeping your home gym floor clean while also allowing you to complete your workouts swiftly and comfortably. Adding storage means that you can keep your gym floor free off clutter.

GYM MASTER 3 Bar Vertical Wall Mounted Rack for Barbell Storage with Protective UHMW Pads Three bar storage capacity. Suitable for Olympic diameter weight bars Made from gunmetal hammer tone powder-coated steel. Premium protective liners protect bars from damage. Wall mounted design - Standard wall fixings provided Approx Dimensions: Height: 11.5cm. Width: 30cm. Depth: 12.5cm Please Note: Not Suitable for Commercial Use. Our Vertical Wall Rack can hold three Olympic barbells and is made to fit nicely on your wall, saving you room in your home gym. The bars may then be rapidly removed as needed. With added protective pads to prevent damage to your barbells, this rack is a recommended storage solution.

GYM MASTER Wall Mounted Olympic 2 inch Bumper Weight Plate Storage Rack Holder. Finished with a hard wearing hammertone gunmetal powder coat Space saving design - floor space is precious and so are your bumper weights, so you should protect them both by using this wall mounted storage rack. Olympic weight plates are easier to access and you will have more floor space for equipment. Protective rubber stopper on each pole to protect weight plates from scratches whilst storing. This weight plate stand is made of thick steel with heavy duty welds. The entire set can hold 400kg - 100kg per storage pole (Subject to wall strength and installation) Approx Dimensions: Max height without plates: 186.5cm. Max width without plates: 13cm. Storage Pole Length: 25cm. Max depth: 44cm (To the end of the bottom storage pole) Please Note: Not Suitable for Commercial Use. Floor space is precious and so are your weights. So, invest in this wall-mounted olympic bumper weight plate rack to protect both. This wall mounted storage rack give you more space for equipment, alongside easier access. Simple storage solutions can make a big difference - allowing you to get the most out of your time and space    

GYM MASTER Horizontal Wall Mounted Racks for Barbell Storage Finished with a hammertone gunmetal powder coat Choose from 3/6 bar storage capacity. Suitable for all size barbells Keeps your bars out of the way while taking up next to no floor space, as well as being very quick to access Wall mounted design - Standard wall fixings provided Approximate Dimensions: Steel Thickness: 5mm / 6 gauge 3 Bar: Height: 40cm. Width per side: 6cm. Depth: 13.5cm 6 Bar: Height: 80cm. Width per side: 6cm. Depth: 13.5cm Please Note: Not Suitable for Commercial Use. Our Horizontal Wall Racks hold 3 or 6 bars, displaying your barbells for quick access and saving floor space in your home gym.

GYM MASTER Vertical Wall Mounted Olympic 2" Barbell Storage Hanging Rack Finished with a hammertone gunmetal powder coat Choose from 1/2/3/5 barbell storage capacity. Suitable for Olympic diameter weight bars Keeps your bars out of the way while taking up next to no floor space, as well as being very quick to access hanging bars Wall mounted design - Standard wall fixings provided Approximate Dimensions: 1 Barbell: Height: 18cm. Width: 7.5cm. Depth: 10.5cm. Steel Thickness: 6mm / 4 gauge 2 Barbell: Height: 18cm. Width: 21.5cm. Depth: 9cm. Steel Thickness: 5mm / 6 gauge 3 Barbell: Height: 10cm. Width: 29cm. Depth: 10cm. Steel Thickness: 5mm / 6 gauge 5 Barbell: Height: 10cm. Width: 44cm. Depth: 10cm. Steel Thickness: 5mm / 6 gauge Please Note: This Hanging Rack Is Not Suitable for Commercial Use. Our wall mounted hanging racks hold between 1 and 5 bars, taking up very little space on your wall and saving floor space in your home gym. The bars are quick and easy to access as well as out of harms way.