GM3 Rear Curved Stabiliser Crossmember Brace Bar

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

GYM MASTER GM3 Dual Cable System Attachment for the GM3 Power Rack. Our GM3 Cable Pulley System is a great bolt-on system for GYM MASTER GM3 Power Rack. Available to suit the 206cm and 226cm height variants, adding even greater functionality. Exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls. Easily add this Cable Pulley System to the GM3 Power Rack using pre-drilled holes in the frame and use your existing olympic plates as weights.  Finished with a hard wearing hammertone gunmetal powder coat to match the cage. 180kg Max Load cable pulley system. Made from high quality steel.  It has Olympic 2" diameter weight poles. This kit includes a straight bar handle and a wide lat pull down bar. IMPORTANT: You must only choose the Missing Stabiliser option if you already purchased the curved stabiliser bar separately. Please Note: Not Suitable for Commercial Use.  Our GM3 Cable Pulley System is a great bolt-on system for GYM MASTER GM3 Power Rack 206cm and 226cm height variants. This kit includes a straight bar handle and a wide lat pull down bar - adding even more functionality. Able to hold up to 180kg of Olympic weight plates with 90kg per side, exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls. Note: Fits only the GYM MASTER GM3 Power Rack; not available for the 186cm variant or other models.

Your browser does not support our video. GYM MASTER GM3 Power Rack Extension Kit - Choice of Height & Depth This is an extension kit only which includes two uprights and four cross members. This extension kit allows you to add more storage, utility and stability to your existing GM3 power rack Available in 186cm 206cm and 226cm height variants to match the GM3 Power Rack as well as 60cm and 90cm depth variants. Finished with a hard wearing hammertone gunmetal powder coat The extension is made from the same 11 gauge 3mm steel frame and comes with the same laser cut number intervals, the same holes and all the necessary nuts and bolts. Dimensions: 60cm Depth Option: This extension adds 60cm internal depth and approximately 66cm overall depth to your existing power rack. 90cm Depth Option: This extension adds 90cm internal depth and approximately 96cm overall depth to your existing power rack. Please Note: Not Suitable for Commercial Use. Our GM3 Power Rack extension kits allow you to increase the depth of your existing rack. This adds more stability and when paired with other attachments you can also increase your storage and utility. The frame is made from the same 60x60mm 11 gauge steel, with laser cut height levels to make adjustments quick and easy.

GYM MASTER GM3 Rear Stabiliser Cross member Brace Bar Add stability and function to your GM3 power rack with this stabilising rear crossmember, without increasing the footprint. Finished with a hammertone gunmetal powder coat. Excellent accessory for our 90cm deep GM3 power racks. This stabiliser bar removes the need for it to be bolted down. Approximate Dimensions: Total height: 20cm Total Depth: 6cm Total length: 110cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER GM3 Front Stabiliser Feet Extension Bars Add stability and function to your GM3 power rack with these front foot extensions With Gunmetal Powder Coated Finish. Made from the same 60x60mm 11 gauge/3mm steel as the main power rack Approximate Dimensions: Total height: 24cm Total width: 6cm Total length: 66cm. Please Note: Not Suitable for Commercial Use. These GM3 Front Foot Extension Bars fit to the front of the GM3 Power Rack to add stability. They can also be used for many other purposes when combined with suitable GM3 frames and accessories.