Olympic 2" Weight Plate Wall Mounted Storage Rack - Vertical or Horizontal

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

GM2 Half Power Squat Rack Cage with Optional Weight Storage and Spotters Finished with a hard wearing hammertone gunmetal powder coat Fully Adjustable Power Rack - 36 Levels with Upgraded Westside Spacing and Laser Cut numbering to help quick selection. Made from High Grade 60x60 2.0mm steel, this Half Power Rack Includes a Pull Up Bar and 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Strong design - 350kg max load. Suits 6 Ft International, or 7 foot bars. Pre-drilled with 11mm diameter holes but floor fixings are not included because they will vary depending on your floor type. Optionally include the Olympic Bolt On Storage System Upgrade and/or 2 x GM3 Safety Spotters The Olympic Bolt On Storage System Upgrade is made from 50x50 14 gauge steel and boasts 4 Olympic Storage Poles on each side. Approximate Overall Dimensions: Cage Dimensions: Height: 221cm (MAX) Width at widest point: 124cm Depth: 149cm. GM3 Spotters: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Weight Storage Add On: Height: 187cm. Depth: 52cm. Please Note: We recommend you tighten all bolts by hand before tightening fully, in order to enable proper alignment. Please Note: Not Suitable for Commercial Use. Our GM2 Half Power Rack is a superb rack for any home or garage gym. With many optional attachments such as Weight Storage and Spotters, this Half Cage will comfortably cater for most home workouts. The frame is made from 14 gauge reinforced steel with 36 adjustable levels, and the height levels are laser cut to make adjustments quick and easy. As standard, this cage includes heavy duty J-Cups with UHMW upgraded pads to protect your barbell.

GYM MASTER Olympic Bumper Plate Storage Stacker Trolley A brilliant storage solution for keeping your gym floor tidy whilst minimising non-workout related lifting! With a small footprint, this multi-directional trolley is simple but effective and a great addition to any busy gym space. Made from powder coated heavy duty steel and with 4 multi-directional heavy duty locking castor wheels for maximum safety and usability. Approximate Dimensions: Total height: 108.5cm. Total width of base: 60cm. Total width inc stoppers: 76cm. Weight sleeve: 93.5cm. Bar diameter: 48mm. Product weight (approx.): 11kg. Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 Olympic Weight Plate Storage Poles for 50mm Power Rack 4 Pole Set - Suitable for Olympic plates and compatible with the GM1 Power Rack. These attach to the 4 bottom corners of the GM1 Power Rack for convenient storage and quick access to your Olympic Plates Hard Wearing Gunmetal finish. Max Load per pole: 65kg. Compatible with all 50x50mm racks with 26mm holes. Approx. Dimensions: Pin Diameter: 25mm. Peg Length: 22cm. Usable Sleeve Length: 19cm. Sleeve Diameter: 5cm. Note: You must use collars to prevent plates from falling if the rack is knocked. Please Note: Not Suitable for Commercial Use.  Our GM1 Weight Storage Poles are supplied as a set of 4. Evidently ideal for helping to keep your home gym tidy and provide quick and easy access to your plates for weight changes in between sets. Also, the storage poles are a great way to keep ground level obstructions to a minimum additionally, making it easy to grab your required weight plate while you are working out.

GYM MASTER Portable Horizontal Bumper Plate Trolley Rack with Fractional Weight Section. Finished with a hard wearing hammertone gunmetal powder coat Easy to load and unload. Castor wheels at the rear and a handle at the front make it easy to move. A Variety of slot widths to suit a wide range of bumper plates. Perfectly suited to a full set of our bumpers. A Lower section at the front to suit fractional change plates Approx Dimensions: Total Height: 30cm Total Width: 40cm Total Length: 157cm Max Load: 500kg. Please Note: Not Suitable for Commercial Use. The perfect functional, yet stylish way to organise your weight plates when not in use at your home gym by using our Portable Bumper Plate Trolley Rack It's portability means its easy to move the plate to the best location for you, whether they are in use or when in storage. Able to accommodate a variety of various sized weight plates, using our Portable Bumper Plate Rack, you can keep weights close at hand. Made with castor wheels and a sturdy grip. Fits full-size bumper plates as well as smaller, fractional change plates

GYM MASTER Wall Mounted Olympic 2 inch Bumper Weight Plate Storage Rack Holder. Finished with a hard wearing hammertone gunmetal powder coat Space saving design - floor space is precious and so are your bumper weights, so you should protect them both by using this wall mounted storage rack. Olympic weight plates are easier to access and you will have more floor space for equipment. Protective rubber stopper on each pole to protect weight plates from scratches whilst storing. This weight plate stand is made of thick steel with heavy duty welds. The entire set can hold 400kg - 100kg per storage pole (Subject to wall strength and installation) Approx Dimensions: Max height without plates: 186.5cm. Max width without plates: 13cm. Storage Pole Length: 25cm. Max depth: 44cm (To the end of the bottom storage pole) Please Note: Not Suitable for Commercial Use. Floor space is precious and so are your weights. So, invest in this wall-mounted olympic bumper weight plate rack to protect both. This wall mounted storage rack give you more space for equipment, alongside easier access. Simple storage solutions can make a big difference - allowing you to get the most out of your time and space    

GYM MASTER Pair of Black Olympic Rubber Bumper Plates Sold in Pairs. Solid rubber construction absorbs impact. Stainless steel centre ring. Printed GYM MASTER logo and raised weight label. Suitable for use on all 2" / 50mm Olympic diameter bars. 45cm diameter (IWF standard). Approximate plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm Please Note: The Full Set option includes 5 pairs of Bumper Plates, totalling 150kg. Not Suitable for Commercial Use.

GYM MASTER Pair of Coloured Olympic Rubber Bumper Plates Sold in Pairs. Solid rubber construction absorbs impact. Stainless steel centre ring. Printed GYM MASTER logo and raised weight label. Suitable for use on all 2" / 50mm Olympic diameter bars. 45cm diameter (IWF standard). Approximate plate thicknesses: 5kg: 2cm 10kg: 4cm 15kg: 6cm 20kg: 8cm 25kg: 10cm Please Note: The Full Set option includes 5 pairs of Bumper Plates, totalling 150kg. Not Suitable for Commercial Use.

GYM MASTER Pair of Competition Olympic Rubber Bumper Plates Sold in Pairs Solid rubber construction absorbs impact - with Chrome Plated steel disc insert Printed GYM MASTER logo and weight label. Manufactured within a tolerance of just +/- 10g which meets IWF standards Suitable for use on all 2" / 50mm Olympic diameter bars The Full Set includes 4 Pairs of Bumper Plates, totalling 140kg. 45cm diameter (IWF standard). Approx plate thicknesses: 10kg: 3.5cm. 15kg: 4.5cm. 20kg: 5.5cm. 25kg: 6.5cm. Please Note: Not Suitable for Commercial Use. These Colour Coded Olympic Competition Bumper Plates are all 45cm Diameter (IWF Standard) and are ideal for Quick Selection During Olympic weightlifting and deadlift exercise. They are shock-absorbing and help protect your training bars and floor because they are made of rubber.

GYM MASTER GM1 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM1 Power Rack. These fit onto the top corners of the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc Hard Wearing Gunmetal finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. Our GM1 Fractional Weight Storage Poles are supplied as a pair. They help keep your home gym tidy and provide quick and easy access to your fractional plates for incremental weight changes.

GYM MASTER Pair of Rubber Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress. Made from solid rubber. Sold in Pairs of Fractional plates. Calibrated to +/- 10g. Suitable for use on all 2"/50mm Olympic diameter bars. Approximate Dimensions: 0.5kg: 13.5cm ⌀ x 1.1cm. 1kg: 16cm ⌀ x 1.5cm. 1.5kg: 17cm ⌀ x 1.9cm. 2kg: 19cm ⌀ x 1.85cm. 2.5kg: 23cm ⌀ x 2.5cm Please Note: Not Suitable for Commercial Use. Use these Fractional Change Plates to increase your one-rep maximum - perfect for Micro Loading exercises and lifts where you are struggling to progress. Excellent for developing body muscle, balance and co-ordination. These rubber plates fit 2" Olympic weight bars. The plates range in weight from 0.5 kg to 2.5 kg, or you can buy a full set

GYM MASTER Pair of Chrome Olympic Precision Fractional Change Plates Perfect for Micro Loading exercises and lifts where you are struggling to progress Made from Hard Wearing Chrome Plated Steel. Sold in Pairs. Calibrated to +/ - 10G. Laser Engraved GYM MASTER logo and weight label Suitable for use on all 2" / 50mm Olympic diameter bars Dimensions: 0.25kg: 10.5cm ⌀ x 0.5cm. 0.5kg: 10.5cm ⌀ x 1cm. 0.75kg: 10.5cm ⌀ x 1.5cm. 1kg: 10.5cm ⌀ x 2cm Please Note: Not Suitable for Commercial Use. Are you looking to take your weightlifting to the next level? Look no further than these Fractional Change Plates. Designed for micro loading exercises and lifts, these plates are perfect for anyone struggling to progress in their lifts. With their ability to increase your one-rep maximum, these plates are excellent for developing your body muscle, balance, and coordination. One of the standout features of these plates is their chrome plating. Not only does this give them a sleek and polished look, but it also provides them with durability and strength. Unlike standard cast plates, these plates are more robust and built to last. Another great thing about these plates is their versatility. They fit 2" Olympic weight bars, which means they can be used in a variety of exercises and lifts. Whether you're doing squats, deadlifts, or any other Olympic-style lift, these plates will help you take your workout to the next level. With a range of weights available, from 0.25 kg to 1 kg, you can easily find the perfect set to suit your needs. And for those who are always on the go, there's even an option to get a set that includes a travel bag, making it easy to take your plates with you wherever you go. But these plates aren't just for seasoned weightlifters. They're also great for beginners who are just starting out on their fitness journey. By using these plates, you can gradually increase the weight you lift, building up your strength and endurance over time. So if you're looking to take your weightlifting to the next level, consider investing in a set of Fractional Change Plates. With their durability, versatility, and ability to help you progress in your lifts, they're a must-have for any serious weightlifter.

GYM MASTER Cast Iron 2" Olympic Tri-Grip Weight Plates. Available in pairs of 1.25kg, 2.5kg, 5kg, 10kg, 15kg, 20kg weight increments as well as a Full Set (107.5kg). Tri-grip design for easy pick up and loading. Suitable for strength training, cardio, and conditioning exercises. Different weight options for progressive weight training. Cast iron design. Suitable for use with 2" Olympic bars. Please note: bar not included. Not Suitable for Commercial Use.

Knurled Anti-Slip Hand Grip to Constantly Provide a Secure Grip on the bar 2" Clip Collars to Keep Weights Secure whilst on the Olympic barbell. Good Olympic Quality, Long-Lasting Product. Load Capacity: 300kg. Olympic Barbell Weights: 4ft = 7.4kg. 5ft = 11.3kg. 6ft = 14kg. 6ft International = 14kg. 7ft = 17kg. Specifications: Middle Barbell Diameter: 2.5cm. 2" Sleeve Diameter: 5cm. 4ft = 120cm, 17cm Sleeves 5ft =152cm, 27cm sleeves 6ft =183cm, 32cm sleeves 6ft International =186cm, 25cm sleeves 7ft =219cm, 40cm sleeves   Please note: No Olympic Weight Plates Included. Measurements May Differ Slightly. Not Suitable for Commercial Use. Your order will be posted together (2" Olympic barbell and spring clip collars), however couriers may deliver the items separately.   2 inch olympic barbell made from heavy duty chrome steel, with quick release spring clip collars and knurled hand grips. Ideal for home gyms, and suitable for a range of exercises, including Olympic lifting, the rotating sleeve allows weight plates to be changed quickly, and easily, due to its spring clip collars while keeping the plates securely in place, whilst using the barbell. Due to the anti-slip hand grips of the barbell, no matter how hard you push yourself, that you ensure your grip remains. The clips also ensure Also, it fits all standard 2 inch Olympic weight plates (not included) This free weight set up will help you to achieve all your fitness goals!

GYM MASTER Pair of GM3 2" Olympic Weight Plate Holder Storage Pole Power Rack Attachments The perfect alternative for more space-consuming storage, and these can be set at the most comfortable height and location for you. Especially well suited for home and garage gyms with limited space. Exceptionally Strong - this storage pole can support as many weight plates as you can fit on it. Simply fit to your GM3 power rack permanently with the bolts included. Please Note: We strongly advise securing all weight plates with a Spring Clip or QR Collar. Approximate Dimensions: Height: 13cm. Width: 6.1cm. Length: 39.5cm Steel sheet thickness: 4mm. Steel hook diameter: 8mm Please Note: Not Suitable for Commercial Use. These Olympic Weight Plate Storage Horns are suitable for our GM3 Power Rack. They are very popular due to their flexibility and ability to store your plates at any height that suits you for easy access and storage.