All products

GYM MASTER Olympic 2" Weight Plate Wall Mounted Storage Rack. Finished with a hammertone gunmetal powder coat. Pick from a single piece or pair. Space saving design - floor space is precious and so are your weights, as a result you should protect them both. Weight plates are easier to access, so, you will have more floor space for equipment. There is a protective rubber stopper on each pole to protect plates from scratches. This weight plate bracket is made of thick steel with heavy duty welds. M10x60 bolts, wall plugs and washers are included. Mounting hole diameter: 11mm. Approx Dimensions: When mounted Horizontally: Height: 10cm. Width: 115cm. Depth of Storage Poles: 32cm. When mounted Vertically: Height: 115cm. Width: 10cm. Depth of Storage Poles: 32cm. Thickness of metal plate: 10mm. Pole diameter: 50mm / 2". Max load = 75kg per storage pole (Subject to wall strength and installation) Please Note: Not Suitable for Commercial Use. Floor space is precious additionally so are your weights, so invest in this wall-mounted 2" Olympic Weight Plate Rack to protect both. With more space for equipment and easier access, this simple storage solution can make a big difference - allowing you to get the most out of your time and space.

GYM MASTER Full Double Barbell Deadlift Loading Jack with HDPE Padding Suitable for 45cm diameter weights. Our double deadlift jack allows a quick, easy and safe solution to loading and unloading the barbell Effortlessly lift both sides of the barbell at the same time to save time, strength and focus for the heavy lifting, and avoid tweaking your back Built from heavy duty steel covered with gunmetal powder coating and HDPE padding to protect your bars. Approximate Dimensions: Total Width - 106.5cm. Depth - 42.5cm. Height - 91cm. Max Load: 360kg Please Note: Suitable for 6 and 7ft bars. Check your bar dimensions. You must NOT entirely unload one side of a heavy barbell while leaving the other loaded. Max load is dependent on correct combined usage of handle bar and foot plate. Not Suitable for Commercial Use.

GYM MASTER Cable Accessory Attachments Pack. Tricep Rope: Ideal for optimising biceps and triceps. Made from heavy duty braided nylon. Toughened steel swivel attachment and suitable for all standard carabiner clips. Target's triceps, biceps, shoulders, legs and abs. Designed to maximise muscle contraction. Dimensions: Length: 68cm - Diameter: 2.5cm. Stirrup Handles: Hard wearing chrome textured grip attachment with a chrome finish. Rotating handle mechanism for ease of use. Heavy duty solid steel. Suitable for high load exercise. Suitable for all standard carabiner clips. Dimensions: Height: 15.5cm - Width: 14.5cm. Triangle Handle: Excellent tool to intensify your back, lower body and upper body training. Hard wearing chrome textured grip. Heavy duty solid steel one piece design. Suitable for high load exercise. Suitable to use with barbell exercises. Dimensions: Height: 18cm - Width: 115.5cm - Depth: 3cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER Portable Horizontal Bumper Plate Trolley Rack with Fractional Weight Section. Finished with a hard wearing hammertone gunmetal powder coat Easy to load and unload. Castor wheels at the rear and a handle at the front make it easy to move. A Variety of slot widths to suit a wide range of bumper plates. Perfectly suited to a full set of our bumpers. A Lower section at the front to suit fractional change plates Approx Dimensions: Total Height: 30cm Total Width: 40cm Total Length: 157cm Max Load: 500kg. Please Note: Not Suitable for Commercial Use. The perfect functional, yet stylish way to organise your weight plates when not in use at your home gym by using our Portable Bumper Plate Trolley Rack It's portability means its easy to move the plate to the best location for you, whether they are in use or when in storage. Able to accommodate a variety of various sized weight plates, using our Portable Bumper Plate Rack, you can keep weights close at hand. Made with castor wheels and a sturdy grip. Fits full-size bumper plates as well as smaller, fractional change plates

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

GYM MASTER GM3 Parallel Grip Landmine T-Bar Row Handle for Olympic Barbells Suitable for 2" Olympic bars Made from heavy duty steel and finished with a gunmetal hammertone powder coat Knurled 32mm Handles Approximate Dimensions: Max depth: 20.5cm Max width: 27cm Max Height: 32.5cm Please Note: Not Suitable for Commercial Use. With 32mm knurled handles and fitment for 2" Olympic barbells, this GM3 parallel grip landmine handle can be utilised to target your upper back, chest and lats without added strain to your wrists.

GYM MASTER GM3 Multi Grip Pull Up Bar Upgrade Attachment for the GM3 Power Rack Two pairs of straight handles and one pair of angled handles. Great for a range of wide and narrow grip exercises Gunmetal Powder Coated Finish  Handle Diameter 32mm with light burring for improved grip. Includes all required fixings. Can be installed Downwards, although Installing Upwards does not add any height to the overall Rack Measurements: Width: 110cm. Height: 13.1cm. Depth: 30cm When fitted to the GM3 power rack: 226cm version 222.5cm to the top of the pull up bar. 204.5 cm to the bottom of the pull up bar if installed downwards 206cm version 202.5 cm to the top of the pull up bar. 184.5cm to the bottom of the pull up bar if installed downwards. 186cm version 182.5 cm to the top of the pull up bar. 164.5 cm to the bottom of the pull up bar if installed downwards Please Note: Not Suitable for Commercial Use.   This Multi Grip Pull Up Bar Upgrade Attachment is designed specifically for the GYM MASTER GM3 Power Rack. It is a versatile attachment that allows for a variety of pull-up exercises by offering wide, neutral, and narrow grip positions. This enables users to target specific muscles more effectively during their workouts. The pull-up bar features a gunmetal powder coated finish, which not only enhances its visual appeal but also adds durability and resistance to wear and tear. The handles have a diameter of 32mm and a light burring that helps improve grip, ensuring a secure and comfortable hold during workouts. This attachment is also able to be installed upside down, saving critical centimeters in your home gym

GYM MASTER GM2 Squat and Bench Press Rack With a powder coated steel frame Adjustable barbell rest and spotter levels to enable a wide variety of exercises -allowing you to choose the perfect position for you. 13 barbell rack levels at 2" intervals. 13 spotter levels at 1" intervals. UHMW lined Barbell rests and spotters to protect your barbells and rack. Two Olympic 2" weight storage poles provide convenient weight plate storage while also adding extra stability. This Heavy Duty Squat Rack has a Max Load of 350kg. Suitable for use with either a 7ft barbell or a 6ft international barbell. Not suitable for use with 6ft standard barbells or smaller. We strongly recommend using the floor fixing brackets that are built into the feet - Anchor bolts are included. Approximate Measurements: Spotters: Lowest bar level: 62.6cm. Highest bar level: 92.6cm. Bar Rests: Lowest bar level: 95cm. Highest bar level: 155cm. Total depth: 98.2cm Total width: 120.2cm Total height with Bar Rests at full extension: 169.4cm Storage pole length: 20cm Please Note: Not Suitable for Commercial Use. VERSATILITY Featuring 13 barbell rack levels at 2" intervals and 13 spotter levels at 1" intervals, the GYM MASTER GM2 Squat and Bench Press Rack allows you to customise your workout positions to suit your unique needs. The GYM MASTER GM2 Heavy Duty Squat and Bench Press Rack is designed for use with either a 7ft barbell or a 6ft international barbell, additionally whether you're performing squats, bench presses, shoulder presses, or other exercises, this rack ensures that you can choose the perfect position for your comfort and safety. Protection & Stability To protect your valuable barbells and rack, the barbell rests and spotters are lined with UHMW, a high-performance material known for its excellent abrasion resistance. Say goodbye to scratches and damage, and focus on your lifts with peace of mind. The optional floor fixing brackets built into the feet ensure enhanced stability and security during your intense workout sessions. Storage With two Olympic 2" weight storage poles, this heavy duty rack not only provides a convenient storage solution for your weight plates but also adds extra stability to the structure. No need to worry about your weights cluttering your space or compromising the rack's integrity.   Enhance your home gym experience with the GYM MASTER GM2 Squat and Bench Press Rack. Designed to provide a wide range of training options, this heavy duty squat rack empowers you to build strength and confidence in your compound lifts. With its powder coated steel frame and adjustable barbell rest and spotter levels, this rack offers durability, versatility, and safety, making it the perfect centrepiece for your home gym.  

GYM MASTER Double Twin Seated V Row Close Grip Handle Cable Attachment Lat Bar Compatible with most cable systems on multi gyms, cable machines, lat pull downs etc Gunmetal Hammertone Powder coating with Knurled grip handles Excellent for targeting your middle and upper back. Standard 32mm knurled grip. Approx Dimensions: Handle total length: 19cm. Diameter: 32mm. Max width: 18cm. Max Height: 16.5cm. Max Load: 200kg. Please Note: Not Suitable for Commercial Use. Narrow dual grip handle, perfect for rows, makings targeting muscle groups in the middle and upper back regions. This Narrow Handle with Knurled Grips simply clips onto most cable systems, machines and multi gyms. Easy to use and great for targeting your upper body. The powder coating comes with its standard 32mm knurled grip handle, is built to last, and won't allow your close grip to slip during your range of motion. With its design you are able to use it for multiple movements, across multiple machines meaning it is truly multi functional, and ideal to hit various muscles in your upper body

GYM MASTER 20kg Body Pump Barbell and Weights Studio Set. Double-grip weight plates can also be used for other weighted exercise movements. Foam padded bar. Comes with strong quick release spring collars to keep weights secure. Holes in each weight plate ensure ease of handling and make them ideal for different upper and lower body workouts. Weight plates feature anti-roll design and are coated with rubber to protect floors. Dimensions: Bar Length 140cm Usable Sleeve Length 21cm Bar Diameter: 3cm. Included in Set: 1x Barbell Bar 2x 1.25kg Weight Plates 2x 2.5kg Weight Plates 2x 5kg Weight Plates 2x Spring Clip Collars Maximum Load Capacity of the Bar is 40kg Please Note: Not Suitable for Commercial Use. Introducing the GYM MASTER 20kg Studio Pump Set with tri-grip weight plates and quick release spring collars. Ideal for combining traditional strength and cardio training. Our GYM MASTER Body Pump Set is perfect for studio or home body pump sessions. Ideal for a multi rep workout, this stylish pump set comes with a foam padded bar for supreme comfort for your workouts.

GYM MASTER 20kg Adjustable Dumbbell Set With Bar Joiner Included Unique Rubber Anti-Loose Ring Design. Comes With 140mm Wide Hand Grip – More Room for Your Hands Connect the Two Dumbbell Bars Together Using the Bar Joiner For a More Inclusive Workout. Higher Adaptability To Suit Any Workout Knurled Designed to Provide a Constant Secure Grip. Max Load: 50kg Dimensions: Bar Length 35cm, Bar Joiner Length 30cm, Total Length 90cm, Grip Width 14cm. For more details, see images. Set Includes: 2x Dumbbell Bars, 1x Bar Joiner (joins dumbbells into one long bar), 4x 0.5kg, 4x 1.25kg, 4x 2.5kg plates, 4x Collars. Please Note: Not Suitable for Commercial Use.

GYM MASTER GM3 Weight Lifting Power Rack Squat Cage and Dual Cable System Attachment with Height and Depth Options. The GM3 Power Rack and the Dual Cable system set is available in 2 heights (206/226cm) and also, 2 depths (60/90cm). It is finished with a hard wearing hammertone gunmetal powder coat The Power Rack is Fully Adjustable with Laser Cut numbering to help quick selection, as a result it suits 6 Ft International, or 7 foot bars. The power rack made from high quality 3.0mm 11 Gauge steel as a result has a 400kg max load. The holes are 16.5mm diameter to suit attachments with a Pin Diameter of 15.5mm. The Pulley System is made from high quality steel and it has a max load of 180kg. It has Olympic 2" diameter weight poles. Included: Pull Up Bar, 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells, Straight Bar handle and a wide Lat Pull Down Bar. Approximate Dimensions (See drawings for specifics): Max Heights: 206cm/226cm Max Depth: 153/178cm Max Width: 133cm Width between uprights: 110cm. Approx Foot Plate: 30cm high (UK Mens size 12.5), 35cm wide Loading space for olympic weights: 24cm per side Please Note: Not Suitable for Commercial Use. The GM3 Power Rack must be bolted down. Each foot has 3 x 11mm holes, however floor fixings are not included because the required fixings will vary depending on your floor type. Our fixing kit available separately is suitable for Masonry floors only. We strongly recommend consulting a builder to recommend fixings for your specific floor.   Our GM3 Power Rack and Cable Pulley System option is a superb high spec rack with a bolt on dual cable pulley system for a home or garage gym. With many optional affordable attachments and variable height options, this System will comfortably handle any home workout. The frame is made from 60x60mm 11 gauge steel, with laser cut height levels to make adjustments quick and easy.

GYM MASTER GM3 60x60mm Power Rack Mounted Barbell Storage Hook Anchor Holder By top mounting this barbell anchor to your power rack you can store your most used barbells in your rack but out of the way. Designed to maximise storage space and minimise the hassle of moving barbells in and out of your power rack, this add-on is sold as a pair. Compatible with many 60x60mm Power racks Stores up to 2 barbells *the size and shape of a barbell and may limit the holder to 1. Made from 5mm thick Steel. Chrome plated finish. Protective black 6mm UHMW barbell liner. Max Load: 60kg. Approximate Dimensions: Height: 23.5cm. Width: 22cm. Depth :3.5cm.  Do not store bars with any weights still attached. Take care when storing or retrieving barbells from the barbell anchor. We do not recommend exercising in the Power Rack whilst any bars are in storage. We recommend only using The Barbell Anchor on well secured racks that are bolted to the ground. Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM1 Power Rack. These fit onto the top corners of the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc Hard Wearing Gunmetal finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. Our GM1 Fractional Weight Storage Poles are supplied as a pair. They help keep your home gym tidy and provide quick and easy access to your fractional plates for incremental weight changes.

GYM MASTER 5 Bar Olympic Barbell Vertical Floor Stand Storage Rack Ideal floor storage, accommodates up to five Olympic weight bars so you can keep your bars secure and close to hand. Perfect rack for keeping your gym clean, while also allowing you to complete your workouts swiftly and comfortably. Made from heavy duty 5mm 6 gauge steel. Finished with gunmetal hammer tone powder-coat Approx Dimensions: Height: 21.5cm. Width: 31cm. Depth: 31cm. Product weight: 13.5kg. Please Note: Not Suitable for Commercial Use. Ideal home gym storage rack for your olympic barbells Our Olympic Weight Bar Floor Storage Stand can accommodate up to five Olympic weight bars, so you can keep your bars secure and close to hand. Made from heavy duty 5mm 6 gauge steel. Perfect for keeping your home gym floor clean while also allowing you to complete your workouts swiftly and comfortably. Adding storage means that you can keep your gym floor free off clutter.

GYM MASTER Set of 2 Spare Replacement Cables for GM3 206cm or 226cm Power Rack Cable System Made with premium materials. Hard wearing and durable. Designed specifically to fit our GM3 Power Rack Cable System Add-on Quick and easy to install. Rubber stoppers to keep the cable safe and secure during workouts. Suitable for all standard carabiners. Approx Cable Length: For 206cm GM3 Cable Pulley System Cable with Bolt Attachment: 288cm Cable with Eyelet Attachment: 292cm For 226cm GM3 Cable Pulley System Cable with Bolt Attachment: 309cm Cable with Eyelet Attachment: 331.5cm Please Note: Not Suitable for Commercial Use. These GYM MASTER GM3 Power Rack Cable System Replacement Cables provide superior performance due to their design, with a load bearing of 180kg. Both cables are included in this set.

GYM MASTER Open Olympic Trap Style Rickshaw Bar Deadlift With It's 30mm thick Grip and Neutral Style, this bar is suitable for a wide range of exercises, such as Shrugs, Lunges and Strongman exercises like Farmers Walk. Please Note: Suitable for use with most bumper plates and all GYM MASTER olympic plates. Not suitable for use with some competition type plates that have an internal diameter of less than 50.5mm/ 5.05cm The easy and quick to load design additionally protects the Olympic plates from being damaged during loading and use. Use this Rickshaw to lift and carry, building grip and dynamic strength - or use for static exercises to train your traps and shoulder muscles 300Kg Max Load – When lowered carefully. This Rickshaw must not be dropped. as a result, if dropped, the weight is multiplied many times and the bars will buckle. The resulting damage will be obvious. You must never load it with a weight you cannot comfortably control during the eccentric (lowering) phase of every exercise. Approximate Dimensions: Height: 39cm Width: 145cm (Between Grips: 56cm) Depth: 46cm Grip diameter: 30mm Sleeve length: 32.5cm. Note: QR collars are not included. In Addition, We Recommend using chalk or tape for heavier loads Please Note: Not Suitable for Commercial Use. Build stronger traps, quads, back, and calves with the Olympic Rickshaw from GYM MASTER. This Open Rickshaw Trap Style Bar with its Neutral Knurled Grip and Higher Start Position make it a very popular piece of equipment. The bar height makes it very easy to load and unload as well as protecting bumper plates from damage.

GYM MASTER GM3 60mm Safety Spotter Arms with Protective UHMW Pad. Finished with a hard wearing hammertone gunmetal powder coat. Designed to fit the GYM MASTER GM2 and GM3 range with 60x60mm uprights and 16.5mm holes. Barbell Rest Area: 54.5cm. Robust and durable barbell rests Safety pin for added security and peace of mind. UHMW pads protect barbells from damage and reduces noise Approximate Dimensions: Barbell Rest Area: 54.5cm. Overall Length: 64cm. Height: 30cm. Width: 6cm. Max Load: Up to 450kg Depending on Rack Please Note: Saftey Spotter Arms are Not Suitable for Commercial Use. Perfect for use with our GM2 and GM3 power racks, this pair of safety arms, protect you as well as your bar, thanks to their UHMW Pad. Ideal for home gyms without a spotter, these arms are a way to maintain a safe environment while working out. Made from heavy duty gunmetal hammertone powder coated steel with Protective UHMW pads, these GM3 Safety Spotters offer safety & support during your workout. Suitable for both the GM2 and GM3 range of Power Racks

GYM MASTER Flat Sit Up Bench Handy foot strap - Perfect for sit ups Also great for dumbbell, barbell and cable exercises. Heavy duty construction. Extra thick padded seat cushion to maintain good form and always remain comfortable. Hard wearing gunmetal finish. Rubberised non slip foot caps for a safe and secure workout. Large Max Load: 250kg. Assembled dimensions: Height: 51cm - Width: 52.6cm - Depth: 90.5cm. Please Note: Not Suitable for Commercial Use.