GM1 Lap Bar Leg Pad Knee Cushion Power Rack Attachment for Lat Pulldown Exercises on 50x50mm Cages

GYM MASTER GM1 Power Rack Squat Cage Fully Adjustable Power Rack - 25 Levels with Laser Cut numbering to help quick selection. It includes a Multi Grip Pull Up Bar, 2 x Full Length Solid Steel Safety Bars, and 2 x High Spec Laser Cut J-Cups with HDPE to protect your Barbells. The GM1 Power Rack is made from high quality 2.0mm steel and it has a strong design and a 250kg max load. Gunmetal Powder Coated Finish Optional GM1 Cable Pulley System The optional GM1 Cable Pulley System is a great bolt-on system which is easy to add to the GM1 Power Rack using pre-drilled holes in the frame.  It includes a straight bar and a wide lat pull down bar as shown in the photos. It has standard 1″ Diameter weight poles and 2″ Olympic Weight Plate adapters. It has a 130kg Max Load Exercises include Seated Rows, Pull Downs, Push Downs and Bicep Curls.  Many other accessories are also available for the GM1 Power Rack Cage. Suits 6ft International, or 7ft bars. Please Note: The multi grip pull up bar can be mounted upside down to reduce the total height of the Power Rack on it's own to approximately 204cm Approx Dimensions - Power Rack Only Height: 213cm (Max) Width: 149cm Depth: 121.5cm Width between spotters: 112.5cm. Approx Dimensions - Power Rack with Cable System fitted Max Height: 217.5cm Max Width: 149cm (Unchanged) Max Depth: 172.5cm Weight Stack Pole Length: 20cm Straight Bar Width: 50cm Pull Down Bar Width: 99cm Please note: Not suitable for commercial use. Power Rack with Cable System Our GM1 Power Rack is a brilliant rack for any home or garage gym. With many optional attachments including a Cable System, this Cage will comfortably accommodate most home workouts. The Power Rack has 25 adjustable levels. The frame is made from 14 gauge reinforced steel, and the height levels are laser cut every 5 holes to make adjustments quick and easy. The Cage includes J-Cups with HDPE upgraded pads to protect your barbell. 2 Full Length Safety Bars in Chrome and a Multi Grip Solid Steel Pull Up Bar With Heavy Duty Textured Metal Grip.

GYM MASTER GM1 Single Leg Roller Support Rack Attachment for Split Squats Lunges etc This compact leg roller attachment is quick and easy to attach to our GM1 Power Rack and any 50mm Rack with 25mm holes. Great for Bulgarian / Bodyweight split squats. As well as other Glute/Ham work. Split Squats help isolate your Quads for direct targeting and efficient workouts. This adjustable height roller with it's luxurious padding allows you to achieve your best form. Also to get the most from your workouts without any niggling discomfort When force is applied as you squat, the roller moves with you to lessen discomfort and increase your range of motion. This ergonomic design allows you to achieve better form and achieve more reps. Compatible with all 50x50mm Racks with 26mm holes. Approximate Dimensions: Pin Diameter: 25mm. Overall Length: 55.5cm. Pad Diameter: 90cm. Max Load: 150kg. Please Note: Not Suitable for Commercial Use. Quick and easy to set up, this GM1 Rack leg roller attachment can be set at a height of your preference.Which helps to make split squats much more comfortable and moving with you as force is applied which helps improve form. As a result, this is Great for split squats and other glute/ham work. This upgrade will help reduce discomfort and increase reps.

GYM MASTER GM1 Hip Thrust Pad Bench Attachment for use with a 50x50mm frame Power Rack with a 25mm/1" hole. Designed to help you perform a range of exercises in comfort at a custom height suitable for you. It's multi functional design also allows for glute ham raises and single-leg squats, making this a real 'must have' attachment. Made from high-quality materials, this hip thrust bench attachment is durable and built to last. Compatible with the GYM MASTER GM1 Power Rack. Approximate Dimensions: Pin Diameter: 25mm. Cushion Width: 90cm. Cushion Depth: 16cm. Cushion Height: 10.5cm. Overall Width: 120cm. Min height to the top of Cushion when mounted to the GM1 Power Rack: 39cm Gunmetal Powder Coated Finish Please Note: Not Suitable for Commercial Use. The GM1 Hip Thrust Power Rack Attachment is a padded crossmember designed specifically for use on the GYM MASTER GM1 power rack. It is designed to help you perform hip thrust exercises easily and in comfort on it's padded bench at a custom height to suit you. It's multi functional design also allows for glute ham raises and single-leg squats, making this a real 'must have' attachment. Made from high-quality materials, this hip thrust bench attachment is durable and built to last. With its adjustable and flexible design, you can easily slide it onto your 50x50mm uprights and secure the locking pins at a height suitable for a wide range of exercises.

GYM MASTER GM1 Olympic 2" Bar Landmine Attachment for 50mm Racks Suitable for Olympic Barbells. Compatible with GYM MASTER GM1 Power Rack Pivots and rotates over 180 degrees on horizontal and vertical axis to allow for varied workouts. Fits 2" Olympic bars. Strong Steel Construction with Powder Coated Gunmetal finish. Connection bolt included. Approximate Dimensions: Inner sleeve length: 26cm. Sleeve opening diameter: 5cm/2" for Olympic barbells. Max Load: 150kg. Bracket opening: 51.5mm to suit a 50mm frame. Please Note: Not Suitable for Commercial Use. Suitable for the GM1 Power Rack with 50mm frame, this landmine attachment pivots and rotates on horizontal and vertical axis to allow for varied workouts. Fits 2" Olympic bars. Brilliant for mixing up your training.

GYM MASTER Dip Bar Attachments. Suitable for power cages or squat racks. Simple Space Saving Upgrade - Quick and Easy to Fit. Solid construction with high quality welds. Rubber handles for secure grip. Suitable for 50mm x 50mm tubes with 25mm holes. With Gunmetal Powder Coated Finish Maximum capacity: 120kg. Please Note: These Will Only Fit 50mm Cages with 2.5cm Holes. Not Suitable for Commercial Use.

GYM MASTER GM1 GM2 Masonry Bolt Fixing Kit - Set of 4 Zinc plated finish with 13mm hexagon head and integrated washers. These M10 x 80mm bolts are fast and secure to install The undercutting action provides a positive anchorage with no expansion forces like those created by traditional expansion bolts. This causes less damage to the target surface and can also allow these to be used closer to the edge. Suitable to the GM1 and GM2 range, depending on your flooring. Spanner Size Required:13mm. Bolt Length: 80mm, Thread Size: 10mm, Drill Diameter Required: 8mm. Note: Always seek expert advice from a professional such as a builder when deciding what fixings to use when securing your kit to the ground or wall Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 Resistance Band Pegs for 50mm Power Rack Compatible with the GM1 Power Rack, these pegs are excellent for adding accommodating resistance Quick and Easy to add and remove - simply slide them through the cage and use for many different exercises and progressive resistance T-bar shape prevents bands from slipping during workout. Solid steel construction with hard wearing chrome finish Approximate Measurements: Diameter: 12mm Peg Length: 20cm Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 50x50mm Power Rack Mounted Barbell Storage Hook Anchor Holder By top mounting this barbell anchor to your power rack you can store your most used barbells in your rack but out of the way. Designed to maximise storage space and minimise hassle, this add-on is sold as a pair. Compatible with many 50x50mm / 2" x 2" Power racks Stores up to 2 barbells *the size and shape of a barbell and may limit the holder to 1. Made from 5mm thick Steel. Chrome plated finish. Protective black 6mm UHMW barbell liner. Max Load: 50kg. Approximate Dimensions: Height: 23.5cm. Width: 22cm. Depth: 3.5cm.  Do not exercise in the Power Rack while bars are in storage. We recommend only using The Barbell Anchor on well secured racks that are bolted to the ground. Please Note: Not Suitable for Commercial Use.

GYM MASTER GM1 Olympic Weight Plate Storage Poles for 50mm Power Rack 4 Pole Set - Suitable for Olympic plates and compatible with the GM1 Power Rack. These attach to the 4 bottom corners of the GM1 Power Rack for convenient storage and quick access to your Olympic Plates With Gunmetal Powder Coated Finish. Max Load per pole: 65kg. Compatible with all 50x50mm racks with 26mm holes. Approx. Dimensions: Pin Diameter: 25mm. Peg Length: 22cm. Usable Sleeve Length: 19cm. Sleeve Diameter: 5cm. Note: You must use collars to prevent plates from falling if the rack is knocked. Please Note: Not Suitable for Commercial Use.  Our GM1 Weight Storage Poles are supplied as a set of 4. Evidently ideal for helping to keep your home gym tidy and provide quick and easy access to your plates for weight changes in between sets. Also, the storage poles are a great way to keep ground level obstructions to a minimum additionally, making it easy to grab your required weight plate while you are working out.

GYM MASTER GM1 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM1 Power Rack. These fit onto the top corners of the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc With Gunmetal Powder Coated Finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. Our GM1 Fractional Weight Storage Poles are supplied as a pair. They help keep your home gym tidy and provide quick and easy access to your fractional plates for incremental weight changes.