GM3 Power Rack Mounted Barbell Storage Hook Anchor Holder

Your browser does not support our video. Specification This Power Rack is available in 2 depths and 3 heights for any home or garage gym The GM3 has a high quality 3.0mm 11 Gauge steel frame coupled with a hard wearing hammertone gunmetal powder coating With Laser Cut numbering to help quick selection, this power rack is fully adjustable and also features westside spacing In addition to a Pull Up Bar, each rack includes 2 x Pin and Pipe Safety Bars, 2 x High Spec Laser Cut J-Cups with UHMW to protect your Barbells. Please Note: The pull-up bar on the 186cm rack is fairly low and will therefore be less functional for taller users. Strong design - 400kg max load. Many accessories are available and in addition more equipment is constantly under development The hole diameter is 16.5mm. To suit attachments with a Pin Diameter of 15.5mm Please Note: Not Suitable for Commercial Use. Installing Your GYM MASTER Power Rack Cage Squat Rack The GM3 Home Gym Power Rack must be bolted down - Each foot has 3 x 11mm holes The required fixings vary depending on your floor type and so they are not included. Therefore, we strongly recommend that you consult a builder to recommend fixings for your specific floor. Our fixing kit for instance which is available separately, is suitable for Masonry floors only. Approximate Power Rack Dimensions Approx. Power Rack Dimensions: Max Width: 133cm Width between cage uprights: 110cm Suits 6ft International, or 7ft bars. The following dimensions vary according to your selection: 186 x 60 Max Height: 186cm, Max Depth: 81cm. 186 x 90 Max Height: 186cm, Max Depth: 111cm. 206 x 60 Max Height: 206cm, Max Depth: 81cm. 206 x 90 Max Height: 206cm, Max Depth: 111cm. 226 x 60 Max Height: 226cm, Max Depth: 81cm. 226 x 90 Max Height: 226cm, Max Depth: 111cm.

GYM MASTER Pair of GM3 2" Olympic Weight Plate Holder Storage Pole Power Rack Attachments With Gunmetal Powder Coated Finish. The perfect alternative for more space-consuming storage, and these can be set at the most comfortable height and location for you. Especially well suited for home and garage gyms with limited space. Exceptionally Strong - this storage pole can support as many weight plates as you can fit on it. Simply fit to your GM3 power rack permanently with the bolts included. Please Note: We strongly advise securing all weight plates with a Spring Clip or QR Collar. Approximate Dimensions: Height: 13cm. Width: 6.1cm. Length: 39.5cm Steel sheet thickness: 4mm. Steel hook diameter: 8mm Please Note: Not Suitable for Commercial Use. These Olympic Weight Plate Storage Horns are suitable for our GM3 Power Rack. They are very popular due to their flexibility and ability to store your plates at any height that suits you for easy access and storage.

GYM MASTER GM3 Pair of Olympic Fractional Weight Change Plate Storage Poles 2 Pole Set - Suitable for Olympic Fractional / Change Plates and compatible with the GM3 Power Rack These fit onto the Power Rack for convenient storage and quick access to your fractional change plates These also provide excellent storage and quick access to QR Collars, Spring Collars etc With Gunmetal Powder Coated Finish. Approximate Dimensions: Usable Pole length: 11cm. Sleeve Diameter: 5cm. Max Load per Pole: 65kg Please Note: Not Suitable for Commercial Use. The GYM MASTER GM2 Pair of Olympic Fractional Weight Change Plate Storage Poles designed to fit onto the GM2 Power Rack, providing a convenient storage solution for your fractional change plates, QR collars, spring collars, and other workout essentials. With an easy-to-install design, you can quickly attach the poles onto your power rack and start organizing your gym space right away. Say goodbye to cluttered weightlifting areas, but hello to a more efficient workout routine. The poles are compatible with Olympic fractional/change plates, making it easy to add small increments to your lifts. With its quick access design, you can easily grab the plates you need and focus on your form, rather than wasting time rummaging through piles of weights. In addition to the fractional plates, the GYM MASTER GM3 Pair of Olympic Fractional Weight Change Plate Storage Poles are also great for storing and accessing other essential gym items such as QR collars and spring collars. With everything organized and within reach, you can stay focused on your workout without any interruptions.

GYM MASTER GM3 Rack Bar Holder Attachment. With Gunmetal Powder Coated Finish. Choose from either Horizontal or Vertical mount options. Designed to fit the GM3 range with 60x60mm racks. These provide storage for a single 2" Olympic barbell to keep it safe and secure out of the way. Fixings required are included. The Vertical holder fits onto the uprights and the Horizontal holder fits to the cross-members. Approximate Dimensions: Sleeve Diameter: 5cm. Storage sleeve height: 19cm. Total Depth: 10.5cm. Please Note: Not Suitable for Commercial Use.

GYM MASTER GM3 Olympic 2" Barbell Landmine Power Rack Attachment with Horizontal & Vertical Pivot Suitable for Olympic Barbells. Compatible with the GYM MASTER GM3 Power Rack with 60mm frame. Pivots and rotates over 180 degrees on horizontal and vertical axis to allow for varied workouts. Fits 2" Olympic bars. Strong Steel Construction with Powder Coated Gunmetal finish. Connection bolt included. Approximate Dimensions: Inner sleeve length: 25cm. Sleeve opening diameter: 5cm/2" for Olympic barbells. Max Load: 300kg. Bracket opening: 61.5mm to suit a 60mm frame. Please Note: Not Suitable for Commercial Use. The GYM MASTER GM3 Olympic 2" Barbell Landmine Power Rack Attachment is designed to be used with Olympic barbells and is compatible with the GYM MASTER GM3 Power Rack. It can pivot and rotate over 180 degrees on both the horizontal and vertical axis, which allows for a variety of different workouts. This attachment is specifically designed to fit 2" Olympic bars and is made with strong steel construction and a powder-coated gunmetal finish for durability. A connection bolt is included.

GYM MASTER GM3 Single Leg Roller Support Rack Attachment for Split Squats Lunges etc This compact leg roller attachment is quick and easy to attach to our GM2 and GM3 Power Rack. Great for Bulgarian / Bodyweight split squats as well as other Glute/Ham work. Split Squats help isolate your Quads for direct targeting and efficient workouts. This adjustable height roller with it's luxurious padding allows you to achieve your best form and get the most from your workouts without any niggling discomfort When force is applied as you squat, the roller moves with you to lessen discomfort and increase your range of motion. This ergonomic design allows you to achieve better form and achieve more reps. Designed to fit the GYM MASTER GM2 and GM3 60x60mm racks and 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. Overall Length: 56.5cm. Pad Diameter: 9cm. Pad Length: 50cm. Max Load: 200kg. Please Note: Not Suitable for Commercial Use. Quick and easy to set up, this GM3 Rack leg roller attachment can be set at a height of your preference. As a result, which makes split squats much more comfortable. Additionally, moving with you as force is applied which helps improve form. Great for split squats and other glute/ham work, this upgrade will help reduce discomfort and increase reps.

GYM MASTER GM3 Hip Thrust Pad Bench Attachment for use with the GM3 60x60mm Power Rack. Designed to help you perform a range of exercises in comfort at a custom height suitable for you. Gunmetal Powder Coated Finish It's multi functional design also allows for glute ham raises and single-leg squats, making this a real 'must have' attachment. Made from high-quality materials, this hip thrust bench attachment is durable and built to last. Compatible with the GYM MASTER GM3 Power Rack. Approx Dimensions: Pin Diameter: 15.5mm. Cushion Width: 90cm. Cushion Depth: 16cm. Cushion Height: 10.5cm. Overall Width: 122cm. Min height to the top of Cushion when mounted to the GM3 Power Rack: 34cm. Min height if mounted on our GM2 Half Power Rack: 49cm. Please Note: Not Suitable for Commercial Use.   The GM3 Hip Thrust Power Rack Attachment is a padded crossmember designed specifically for use on the GYM MASTER GM3 power rack.  It is designed to help you perform hip thrust exercises easily and in comfort on it's padded bench at a custom height to suit you. It's multi functional design also allows for glute ham raises and single-leg squats, making this a real 'must have' attachment. Made from high-quality materials, this hip thrust bench attachment is durable and built to last. With its adjustable and flexible design, you can easily slide it onto your 60x60mm uprights and secure the locking pins at a height suitable for a wide range of exercises.

GYM MASTER GM3 Lap Bar Leg Pad Knee Cushion Power Rack Attachment for Lat Pulldown Exercises on 60x60mm Cages With Gunmetal Powder Coated Finish. There is nothing worse than being lifted out of your seat during pull downs, so this simple attachment is here to help. Designed to compliment the GYM MASTER Dual Cable System Attachment for the GM3 Power Rack, you simply slide it onto your uprights and secure the locking pins at a height comfortable for you. With an extra wide padded cushion, this attachment can keep you firmly in place and enable you to achieve new PB's and that critical full stretch when performing pulling movements with the upper pulley. Compatible with GM3 60x60mm Racks with 16.5mm holes and 1160mm between them (see dims image). Approx Dimensions: Pin Diameter: 15.5mm. Cushion Width: 50cm. Cushion Diameter: 9cm. Overall Width: 122cm. Please Note: Not Suitable for Commercial Use.  The GYM MASTER GM3 Lap Bar Leg Pad Knee Cushion Power rack attachment is the perfect accessory to complement your home gym setup. This attachment is designed to help you perform lat pulldown exercises without being lifted out of your seat. With its adjustable and flexible design, you can easily slide it onto your uprights and secure the locking pins at a height that is comfortable for you. Made from high-quality materials, this lap bar leg pad knee cushion is durable and built to last. It is specifically designed to be used with the GYM MASTER Dual Cable System Attachment for the GM3 Power Rack. Which makes it the perfect addition to your home gym for those who are serious about their fitness goals.

GYM MASTER GM3 Y Dip Bar Handle Add On Attachment for Power Racks and Cages 15.5mm pin to suit 16.5mm holes on the GM2 and GM3 range. Fits the GYM MASTER GM2 and GM3 range of racks. Finished with a hard wearing hammertone gunmetal powder coated steel. This clever design quickly and easily transforms your rack into an adjustable height dipping station. Premium UHMW liners prevent scratching damage to your frame to prolong the condition and life of your equipment Approximate Dimensions: Max Depth: 68cm. Max height: 21cm. Max width: 65cm. Weight approx: 8kg. Max weight load: 250kg Please Note:This Product is Not Suitable for Commercial Use. Add this Y Dip Bar Attachment to enhance your GM2 or GM3, and give yourself a new option in your workouts - with its liners it also protects your rack

GYM MASTER GM3 Pair of Heavy Duty Dip Bars to fit the GM2 / GM3 60mm Power Racks With Gunmetal Powder Coated Finish Steel This Attachment Adds Dip Bar / Station Functionality to the GM2 and GM3 Power Rack Cages Specific Fitment For Cages With 60mm Frame Size and 16.5mm Hole Diameter. Pin size Approx 15.5mm. Maximum Capacity: 160kg Compatible with GM3 60x60mm Racks with 16.5mm holes. Approx Dimensions: Pin Diameter: 15.5mm. Handle grip diameter: 33mm. See Drawing for details. Height: 12cm. Width: 39cm. Depth: 29.5cm. Bar Angle: 75°.  Please Note: Not Suitable for Commercial Use. Looking to enhance your workout routine? The GYM MASTER GM3 Heavy Duty Dip Bars - Pair is a perfect addition to your home gym setup. Made from gunmetal powder-coated steel, these dip bars are durable and built to last. The attachment adds dip station functionality to the GM2 and GM3 Power Rack Cages, giving you more exercise options for a full-body workout. With a specific fitment for cages with 60mm frame size and 16.5mm hole diameter, these dip bars are designed to provide a secure and stable base. The pin size is approximately 15.5mm. These heavy-duty dip bars have a maximum capacity of 160kg, making them suitable for most users. The dip bars' adjustable height allows for different users' heights and exercise preferences. With these dip bars, you can work on your triceps, chest, and shoulder muscles. They are also great for building upper body strength and improving overall fitness levels.